• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Aftermarket Wheels - Hurricane lug nuts

certifiablejeep

Definitley Certifiable
Lifetime Member
City
Bedford
State
NH
Never knew this... went to put on this old school tire combo last night and the lug studs don't protrude to get lug nuts on.
Bummer.

My guess is either longer studs, but that won't take up the slack in the holes, or something like this


I have never encountered this before.
My guess is they came with their own lug nuts back in the 70's, but those are long gone.

cb

20210908_181905_resized.jpg

20210909_163933_resized.jpg

cb
 
Some used a washer and lug nuts that fit down through the wheel bolt. They may still be available at napa or autoZone, etc.
 
Those look excellent. I let a set go a year or two ago. PO didn't use washers and the aluminum didn't hold up well.
 
Good luck finding longer studs. I went down that wormhole and nothing was “perfect”. My wheels are a taper seat and I found some short shank taper seat lug nuts.
If your wheels use the shank and washer style, then measure the thickness of the wheel at the hub and get a shank style nut just a bit shorter. This style of nut was super common in the 80’s. The studs probably don’t protrude out the front of the wheel, but other than being a pain, that’s not an issue. Make sure to get a quality nut- McGuard and Gorilla come to mind.
If you really want to go “all in”, you can have the wheels machined and steel taper seat inserts installed. I looked into that once- I figured about $100/wheel.
 
Good luck finding longer studs. I went down that wormhole and nothing was “perfect”. My wheels are a taper seat and I found some short shank taper seat lug nuts.
If your wheels use the shank and washer style, then measure the thickness of the wheel at the hub and get a shank style nut just a bit shorter. This style of nut was super common in the 80’s. The studs probably don’t protrude out the front of the wheel, but other than being a pain, that’s not an issue. Make sure to get a quality nut- McGuard and Gorilla come to mind.
If you really want to go “all in”, you can have the wheels machined and steel taper seat inserts installed. I looked into that once- I figured about $100/wheel.
Interesting- a quick search led to finding this-https://www.ebay.com/itm/351338250067
A lot cheaper than what I found years ago.
 
Thanks for all the info^^^^ I will check at the autoparts store and see what they have and at least figure out what I need and order from there.

cb
 
This style of nut was super common in the 80’s.
Never knew this... went to put on this old school tire combo last night and the lug studs don't protrude to get lug nuts on.
Bummer.

My guess is either longer studs, but that won't take up the slack in the holes, or something like this


I have never encountered this before.
My guess is they came with their own lug nuts back in the 70's, but those are long gone.

cb

View attachment 97009

View attachment 97010

cb
Yeah, I had a set of those turbines on my Power Wagon with 36.5/14 RVT's...
some of the front wheel studs didn't like the stress with the 5 x 4-1/2" bolt pattern :shrug:

BTW... love your new shop :cheers:
 
Another source for this type of rim is on the mid 80’s ram charger. I think before 83 (not sure of the change over year) they were 5 x 4.5” pattern, but the 4wd changed to 5 x 5.5” after that. 2wd remained 4.5” circle.

0DDE460D-E8D6-427C-9BA3-279C2E3CBB89.jpeg

AFA3BB7F-43EB-423A-9A84-81B9AB9CFB83.jpeg
 
Well The store only had 2 packs of 4 lugs (8 total) so I got them.
They work... a little hard to start the first one and then get the second one going, but the rest now look like they will go in.
You need a bit of pressure to get them in the hole and around the lug, but it looks like it will work.
It is on the ground now with 2 on each tire... it isn't driveable anyway, but I need to move it from the lift.

cb

20210910_173529_resized.jpg

This is what I got at the store.

20210910_173015_resized.jpg

doorman.jpg
 
Back
Top