• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Alright...so who's got the last remaining WT Dana 44 rear end squirreled away....

Very nice. !!
If my 44/30 4:10 ratio set were not already installed. , I would have been glad to sell you mine
I hope to change them out for 60/44 later this year. , but can't get to that yet
Again ,congrats. !


Sent from my iPhone
 
they are out there. I have one with 3.54, 3.73 detrioted, one in pieces, and my brother has one with 4.10. prices to vary if the person knows or doesn't know what it is. sounds like you got a good deal, probably from a 258/t-5 jeep.
 
Very nice. !!
If my 44/30 4:10 ratio set were not already installed. , I would have been glad to sell you mine
I hope to change them out for 60/44 later this year. , but can't get to that yet
Again ,congrats. !


Sent from my iPhone

might as well make some money on it and send it my way.... you have to many projects already :)
 
Touchdown!
uryge8yr-1.jpg
2ajajytu-1.jpg
hu6u5ame-1.jpg
ypasa4uz-1.jpg



Sent from my iPhone
 
Been looking for a WT Dana 44 couple years...apparently so have EVERY SINGLE OTHER CJ OWNER.....
SOMEBODY's got to have one that they'd part with....
Any recommendations if I have to go NEW?
Thoughts?
Cheers,Dylan

Hi Dylan,
Do you have a 20 in it now? Have you had to replace the gears already from being tore up? Just curious to know of your journey.. thanks,
z
 
Hi Dylan,
Do you have a 20 in it now? Have you had to replace the gears already from being tore up? Just curious to know of your journey.. thanks,
z

The AMC 20 is still sitting in the Scrambler. 55k original miles. But I decided that since I'm building this thing, and want to do it once and do it right, that I'd swap it out with a Dana 44 if I could find a 86 CJ version. I found this one from a guy who knows a guy who knows a guy that was completing a nut-n-bolt restoration of an 86 CJ-7. He had this one in 3.31 completely professionally rebuilt drum-to-drum (Timken bearings, new drums, pads, springs, e-brake cable, powder coated, etc)...and he ended up wanting something else for his project before he got it installed. did talk to the shop that did the work - they know the guy and apparently do a lot of work for him....so I drove 4.5 hours (each way) with my pregnant wife and 2 kids and picked it up for a LOT less than the shop charged for the rebuild alone....

Eventually I'll go 4.10 locked front and rear...but until then, I have a bolt-in drivable set-up....

Oh, right, you asked about the AMC 20...it's perfectly fine (still has the rubber boots around the brake adjustment holes!). In fact, I'm selling it cheap to the guy who found this one for me....Jeep Karma deposit!

Cheers,
Dylan
 
Congradulations! On both the Tractor and the 44. I'd be lost without my front end loader to assist in loading and unloading. :wave:
 
Dylan, Thanks for giving alittle more of the back story. I was curious about the 20. In my 72 cj5 I had until stolen, even with a 401 t18 the 20 continually surprised me at the amount of torture it endured. I'm always curious about others experience with their 20s. thanks
z
 
Dylan, Thanks for giving alittle more of the back story. I was curious about the 20. In my 72 cj5 I had until stolen, even with a 401 t18 the 20 continually surprised me at the amount of torture it endured. I'm always curious about others experience with their 20s. thanks
z
Jeff your '72 should have come with the DANA 44 rear, 30 front with either 3.73 or 4.27 gears. Standard and only one available for mid 1971 through 1975. started using the model 20 in 1976 with a wider rear frame. :wave:
 
Jeff your '72 should have come with the DANA 44 rear, 30 front with either 3.73 or 4.27 gears. Standard and only one available for mid 1971 through 1975. started using the model 20 in 1976 with a wider rear frame. :wave:

Yes sir.. In 77 or 78 when I purchased it the powertrain had been gone thru. Engine, tranny and rear end replaced. Still had the 30 up front. The front and rear gears did not match.
 
I guess I'm a Jeep hoarder.....I have 5 of them. One in 2.72, two in 3.31, one in 3.54, and one as an empty housing. No plans on selling any as they go under my personal CJs.
 
Back
Top