• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

AMC 20 axle

rdogman

New member
City
High Level
State
AB
Hello
Both my amc 20 axle have been leaking for a while So I decided to try and order a 1 piece kit R T 23008 and replace the axle at the same time.Boy are they hard to find now a day
In Canada anyway.
I have a 81 cj 8 but I replace the the axle with a 82 cj 7 differential at the time it had 2 piece axle in them WT diff
Anyway pull the old axle out As you can see from the picture the old 2 piece 1axle is 3 inches shorter
The kit I order is RT 23008 (only kit available at the time all else b/o )
Has 2 axle the same length
Did I order the wrong one Or did they screw up and have 2 of the same length axle in the box
I didn’t think any amc 20 came with 2 same length axle
I might be wrong
What you think ????
Ron
 

Attachments

  • IMG_3107.jpeg
    IMG_3107.jpeg
    116 KB · Views: 11
Pretty sure they should be different lengths. Interested to see how you get on, i need to do this swap as well.
 
I believe there should be a difference also
I had a CJ 7 about 15 years ago That I put a 1 piece into it And if memory serves me right there was a difference
I was just wondering if someone was going to chim in and say they have a Amc 20 and both axle were the same length from a ______
I email the supplier we will see what they come back with
Thanks
 

Attachments

  • IMG_3111.jpeg
    IMG_3111.jpeg
    131.3 KB · Views: 1
The only rear that I’m aware of that uses 2 of the same length axles is a Scout II Dana 44 rear. I have one in my Scrambler. It’s 58.25” wheel mounting surface to wheel mounting surface.
 
On the AMC20, passenger and driver side axle shaft lengths are always different, narrow track, wide track, and Quadratrack. No iterations have same length shafts.
 
Back
Top