cchambers
Legacy Registered User
- City
- Sioux Falls
- State
- SD
I'm rebuilding a 1981 cj8 for the first time. I need some advice on the AMC20 in the rearend.
I took it out of the jeep over the 4th and when I took the cover off.
I found someone else had been in the rear end. In stead of using gear lube. They used ATF to lubacate the gears.
The spider gears have marks on them and the ATF has that burnt smell. I don't know if the ring gear or pinion is hurt? I think all of the bearings in the third member are toast as well.
So do I rebuild the AMC20 and put mega dollers into a 30 year old rear end or look in the after market for some thing better?
Just to make you guys aware I have never set up gears in a axle before but am willing to give it a try.
Thanks
I took it out of the jeep over the 4th and when I took the cover off.
I found someone else had been in the rear end. In stead of using gear lube. They used ATF to lubacate the gears.
The spider gears have marks on them and the ATF has that burnt smell. I don't know if the ring gear or pinion is hurt? I think all of the bearings in the third member are toast as well.
So do I rebuild the AMC20 and put mega dollers into a 30 year old rear end or look in the after market for some thing better?
Just to make you guys aware I have never set up gears in a axle before but am willing to give it a try.
Thanks
