• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

An Australian CJ-8 Overlander in New Jersey: Preservation/Maintenance/Improvements

bfee03ed1627dd1966391d64914dfff7-1.jpg
 
Gazzo, the beach picture you were looking to match up above was taken at "Myalup Beach" circa 1999 ish.

Some other info, and then ill be posting some other wheeling pics he brought to me :cheers:

This Overlander was purchased by Joe in 1998 with 102,000 kms on it. It sat in a garage from around 1989 to 1998 when a woman inherited it from her father and then let it sit for many years. It was this garage time plus Joes garage keeping and steady maintenance is much of the credit for how if survived. As Joe was proud to say, it never touched salt water, not even once. As the pictures will show later, tho, he wasn't afraid of many high fresh water crossings with it :) Joe had the engine rebuilt at 131k as well as the trans. As stated above the rear was done 3 times. The air conditioning was added in 1998 also, in fact as he said it much of the work was done right away to it to take it from stock form to capable cross county overlanding machine, the lift, the large tank, tube headers (3 into 2, and then into 1), heavy duty cooling, headlight and driving light upgrades (the headlights are 80/110 watt) 32" tires, and much more. Joe had a new off the lot red XJ that he only had two years and wasn't very happy with before purchasing the Overlander. it was the resale of this XJ, that was to be the money to build the overlander. As he put it, he bought it for 7k AU in 1998, and immediately put 20K in. He also says that over the ten or so years, he got to 50K total into it including that original 7K. When standing in front of it with him and going all over it, not only was this awesome, but it felt like this was the norm in Australia...people modify just about any vehicle for the use that they expect. 50K AU into a vehicle doesn't mean you are rich (he had 43K in the red XJ in just two years)...its just what you do, if you are the overlanding type and you travel like they do. Fishing trips 3 hours away, visiting friends, driving 800 kilometers between gas stations in the "desert section" of AU, etc. And, the last 2 years they had it, it was his Wifes daily driver when they had only one other car :smokin:
 
Good story. 1998 7k, I paid exactly that in 2012 for mine.
 
These are some of the pictures from the album he brought to show me

44540dea834a60d4be76b14011b4097c-1.jpg


f3a26f4e9b4e0c2874ecb8d3a53381b8-1.jpg


The garnet scrambler was imported as U.S. version and converted to RHD

17019371efa65eef69980772d0675e0b-1.jpg


1794750958ca6bb6ae58ef236facd763-1.jpg
 
An Australian CJ-8 Overlander in New Jersey: Preservation/Maintenance/Improv...

Wow great pix. The second one in the first batch looks like "the powerlines" at Mundaring just east of Perth. The short guy in the centre is (I'm sure) Eddie Villanova (RIP), a legend in the West Australian 4X4 scene, particularly Jeeps. He had a store called 4WD USA. His son Daniel runs it now. Before the Internet Eddies was one of only two stores in WA we could get parts for our heeps. Thanks for sharing JJ, they show a good cross section on the sort of terrain we have to play in here.
 
Amazing that someone photographed all this before digital cameras made everyone photo everything!.
I also see that the wipers are parked on the opposite sides on the RHD models;)
 
This was pure awesome. Thank you for sharing. Thank him for sharing.
 
I agree, thanks for sharing. Awesome seeing the history of your Overlander
 
So..part two of the Narrative...

I realize above that I talked about the axles in that other thread, but not here...so the rear axle was rebuilt 3 times, the third time tho the upgrades lasted. Its on its third housing after bending two of em, and that one got 3.73 gears, and "power diff locks" (in both axles) which he described as something like our "Detroit true tracs" which clutch up when under power, the non selectable kind. I have Detroit tru tracs in my 89 XJ v8 w/4.10s and the idea and feel (non existent, you don't know they are there) is the same, although these he is saying were built custom from Nash Rambler (I think) internals that could fit the axles back then and it was parts they had to work from. I still wasn't clear on that but I can tell you they are great axles having climbed the big dunes in MI with them myself and towing that brick of a camper trailer with it for 3000 kilometers and now it all makes sense :smokin: At the time, the custom truss kit was added, and one piece axles, and etc, to make a pretty much bullet proof axle relatively. That was around 130K and it has 292K on it now. AU never got rear Dana 44s by the way, cause Jeep had pulled outta Oz completely by 1986 and didn't come back until like 1994.

I wont bore you with all of the other little things I absorbed from Joe, but I wanted to capture just the custom things to show the extent they go to when limited aftermarket support is avail. Making a custom lift kit using a furnace (see above) pretty much sums that up:) And by the way, that lift is perfectly dialed in for the heavy arse end and 150 litres of fuel hanging back there too, it rides perfectly, doesn't bounce, and sits level. It has old man EMU shocks still on it, his originals from the main part of the 1999-2000 work.
 
Nice information :thumbsup: :wave:

AMC muscle cars, late 60's early 70's, that had the AMC 20 axles before the Jeeps, used a "Power Lock" LSD. When Jeep started using the AMC 20 axle, they out fitted it with the "Trak Lock" LSD. From what I have read, the "Power Lock" is a more effective LSD.

The "Power Lock" has always been available for the Dana 30. For some reason, AMC/Jeep decided to use the less effective "Trak-Lock" LSD :shrug:
 
This is a great thread. If I give you my VIN will you do a full jeepancestry.com search on my Overlander as well? I'd like to know who let the floors rust out.

Also, do you now jam out to Frank Zappa while working on your Overlander after hearing the story of Joe's Garage?
 
This is a great thread. If I give you my VIN will you do a full jeepancestry.com search on my Overlander as well? I'd like to know who let the floors rust out.

Also, do you now jam out to Frank Zappa while working on your Overlander after hearing the story of Joe's Garage?

JA, I'm waiting for your reply in my inbox [emoji22][emoji27]
 
Nice information :thumbsup: :wave:

AMC muscle cars, late 60's early 70's, that had the AMC 20 axles before the Jeeps, used a "Power Lock" LSD. When Jeep started using the AMC 20 axle, they out fitted it with the "Trak Lock" LSD. From what I have read, the "Power Lock" is a more effective LSD.

The "Power Lock" has always been available for the Dana 30. For some reason, AMC/Jeep decided to use the less effective "Trak-Lock" LSD :shrug:

Thanks for the info Spanks! Now it all makes sense. Cant wait to really get into the weeds on this over some beers at Sandblast 9.. :cheers:
 
Now, part 3 of the story... Joe and his wife stayed for two nights in NJ, then two nights in the Pocono Mountains nearby. On the Sunday after the Overlander "outdoor party" it rained like nuts. In fact, it was the first day of the full week without any sunshine and constant gloom, rain, and funk we just escaped on Mothers Day. (a rolling joke was that the Aussies brought the "London Weather" with them :) )

So, that rainy Sunday, Joe and I spent quite a bit more time poking around on it inside the garage, and that's when the video describing the old school way of using pretty much blacksmith "technology" to make the custom leaf packs was taken. At the end of the day, I had a surprise for Joe which was to present him with the original glove box door from his Overlander, that I had removed years ago when I found an original paint "Olympic white" one to replace it with. Joe had added a stainless steel grab bar and smaller handle to make opening the glove box easier. (as shown in the picture below) so what better way to get a piece of his jeep to him. He wanted me to write something on it and said he would display it in his garage along with a few other bits from his Jeeping and ARB days in the past. We then had a great dinner with his wife at a local taphouse and off to the Poconos they went for Monday and Tuesday (and more rain) I met him for dinner one last time in the Poconos Tuesday night at "Barley Creek Brewing Co" which is well worth the hour drive from my house. :cheers:

Still more Overlander talk ensued, I cant describe how much we talked about just that one common bond, that "car"... In Australia, or maybe its just western Australia? (gazzo?:))- everything is called a "car". Even trucks.. and SUVs...and his replacement for the Overlander (literally) when he sold it in 2008, was the 3.0L diesel powered Toyota "prado" but its referred to as a "car"....outfitted with a snorkel, bull bar, mild lift etc. And it now is outfitted with this cool hard back fully self contained and off the grid capable camper trailer. With the Overlander, it was always tent camping, and never had a hitch. But this very capable pair will now carry Joe and his wife into retirement on many of the same adventures that the Overlander took them on.
 
Thanks for the update. Hood times for sure. Not all of us call everything a car. Our titles refer loosely to the vehicle (and we rarely say "my", it's "me"):
Me ute, me jeep, me cruisa, me Prado, me boonga, me Lambo etc
What we rarely call vehicles with less than 6 tyres is "truck" although more and more people are adopting the American reference to their SUVs even their softroaders as in "I bought a new Grand Cherokee, I really love that truck". Hopefully it doesn't catch on.
 
Back
Top