• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Atlas verses D300 4:1

Grey Fox

SOA Member
Lifetime Member
City
Bountiful
State
UT
I have come to the realization that lower gearing is inevitable. We did Pritchett Canyon a couple of weeks ago which was dang fun and although I made it out without winching I can see how lower is better. I currently have a stock D300, 513 gearing, D60 & D44, 360, w/ 3 speed auto (993 ?) not sure about that #. I can do the D300 4:1 upgrade for way less. Is the Atlas that much better? With the Atlas you can get even lower than 4:1? If 4:1 is good is 6:1 better?
And whats up with this twin stick stuff? I want to hear from guys that have gotten out of a pickle in real life because they had twin sticks.
 
Twin stick, clocked and 4:1.............

Let's see, with an Atlas, you can choose your ratio or go 3 speed now, I think. You can clock it, as it comes. It's already twin stick controlled and has the heavy duty outputs for the front and rear in an aluminum case...I think. If you are going to do all of the above to a Dana 300, you will spend as much or more as an Atlas will cost. If you only want the 4:1 and twin stick, it will be cheaper to build the 300.

The twin stick is very handy for front digs to move just the front end over and the rear, low range is great in tight turns. Also, if you blow a diff, you can drive on with just the other end.
 
I believe I read that with the twin sticks on the dana 300 you can do front wheel drive low range, or rear wheel drive low range, which could be handy:D
 
I was at the same crossroad you are a few months ago. By the time I added up all the costs it would take me to upgrade the dana 300 to the atlas standards the atlas was just a little more but well worth the few extra bucks in my opinion. I did the HD front/rear 32 spline output shafts, 4.3:1, and the flange yolks. The atlas is larger than the dana 300 but not by to terribly much. And like John N stated you can clock it as it comes and it already has the twin sticks. If you are just wanting the 4:1 gearing and twin sticks, the dana 300 would be cheaper. As far as the 6:1 goes, what size of tires are you running? With your 5.13 gears you could gear your rig too low....
 
John, What do you mean "you can choose your ratio or go 3 speed". Also what is clock?

I'm running 37" tires and someday will probably go bigger. With these guys running double transfer case's can you go to low? I realize at some point one could go to low but say I went with the 6:1 ratio, what wouldn't I like? I guess on moderate trails the travel speed would be painfully slow? Anything else?
Also my passenger seat when rotated forward slightly rubs the TC lever. With a twin stick will that be an issue?
 
Grey Fox said:
John, What do you mean "you can choose your ratio or go 3 speed". Also what is clock?
Kim,

What John means is there is only stock and a 4:1 kit for D300 - the Atlas has multiple gearing options.

there is a version of the Atlas that is 3 speed - consider it like having 4 Hi, 4 Lo, & 4 Extra Lo

Clocking is the common term for repositioning the tcase up so it doesn't hang down so low. This allows for flatter skid (thus higher belly clearance) giving you less to 'hang' up on.

Hope that helps.

Truck
 
If I'm not mistaken, Stak is the one that offers the 3-speed, then AA upped the ante in the 'game' by offering the Atlas in a 4-speed version. You might want to take a look at the Stak as you're comparison shopping...you could retain close to your current low-range while adding on an additional lower range all inside one case (doubler without the double cases).

If you're hitting the shifter, heat & bend it for clearance.

There's also the option of going with cable shifters which would allow you to mount them pretty much wherever you wanted.
 
jeepdad said:
I believe I read that with the twin sticks on the dana 300 you can do front wheel drive low range, or rear wheel drive low range, which could be handy:D

You have to either remove the interlock pills or grind an additional notch in one of the shift rails to neutralize the function of the pills in order to get front wheel drive low.
 
Jeepskate said:
If I'm not mistaken, Stak is the one that offers the 3-speed, then AA upped the ante in the 'game' by offering the Atlas in a 4-speed version.
All true. I'm kind of partial to the STaK.:D
 
Ok the 3 speed thing is new to me. Having been enlightened now the D300 upgrade is not an option. That 3 speed thing seems to be very appealing. So based on the fact that this rig is no tube frame rock crawler yet I do like the challenging stuff. I'm maybe thinking of the 5:1 low, 2:1 middle, 1:1 high.
 
Got Ya....

Jeepskate said:
You have to either remove the interlock pills or grind an additional notch in one of the shift rails to neutralize the function of the pills in order to get front wheel drive low.
Got you on this one Rodney, You can't get Front Wheel Drive High without altering the interlock pills, but you can get Front Wheel Drive Low.
 
That would be nice to have front wheel drive low without being in four wheel drive, like in a tight turn. I will look at this option when I rebuild mine, Also I remembered where I read that it was Moses':bow: cj rebuilders manual:D
 
Last edited:
I haven't been to Moab in the Scrambler, but I have been in some very steep situations on pure non-slick rocks here in the East. With the TF999 auto, 35s, and only 4.10 gears, I've never seen a situation where I needed lower gearing. With 5.13 gears and 37s, you would still be even lower.

With a 4:1 transfer case and the auto, you will find yourself too low for normal trail travel when in low range.

So if you feel you must upgrade, would strongly recommend the three speed transfer case or a doubler.

Front wheel digs is nice, especially if you add independent rear line locks. Then you can spin around on a tire or reposition the front end on a hard climb.
 
John N said:
Got you on this one Rodney, You can't get Front Wheel Drive High without altering the interlock pills, but you can get Front Wheel Drive Low.

You are correct, John...the memory is still a little bit off.
 
For the $, I think a doubler is your best bet. Especially if it's one of the ones that uses the front half of a 241 case. 2.72 reduction in the doubler, 2.62 in the D300, or 7.13 combined. Last time I looked, the conversion kit was about $450.00. DD machine, Poulsbo, WA.
 
In that case I would look at something like the Mad Roster box. There is another competing version too. Over on Pirate Jeep Hardcore there is a pretty good discussion of the two.

Basically you take a NP231 from a YJ or TJ and cut off half and weld in a plate and then you get a range box to help with ultra low gears.

But if you have the extra cash the 4spd advanced adapters box is very hard to beat.

Carl
 
Jeepskate said:
You are correct, John...the memory is still a little bit off.
That's OK, you have a good excuse. Hope you're doing well.
 
Up Graded the 300

I am one of the few that over a few years slowly upgraded the dana 300. I didn't do it all at once, it was over a period of years. But...

If i had it to do all over again i would go with an Atlas or Stak.
 
So I'm thinking the 3 or 4 speed is they way to go. I don't think anyone has answered one of my original questions. If 4:1 is good, is 6:1 better and if so 10:1 is best? If You can get a 2:1 3:1 5:1, Why not get a 2:1 4:1 10:1?
 
Back
Top