• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Bringing an 82 Scrambler back to life

TX8

New member
City
Lubbock
State
TX
I had the great fortune of being gifted a 82 Scrambler by a family member. It had been sitting for about 10 years. Luckily it was in the middle of the Nevada desert so rust didn’t get after it. Mice had called it home at some point and made a mess of the interior and engine bay. I am posting a ton of pictures from when I got it 2 months ago to now. Aside from the upgrades, everything on it is original and it’s a pretty cool sight to see.

Work completed so far:
I have replaced most of the suspension, soft fuel lines/filter, fuel pump, rebuilt the Carter BBD, brake line extensions all the way around, master cylinder, vacuum and emissions removal. Grinded out some surface rust on the interior and rattle canned it with some matching paint. Aluminum valve cover installed to replace the leaky plastic. Waiting on time to install the HEI.

Details
1982 Jeep Scrambler
4.2L engine
3-speed auto TF999
Dana 300
AMC20/Dana30
4” Rough Country lift on 33” tires
01306054-6219-4E20-9451-3DE3AD11FD41.jpeg4A7886DF-004D-4EC8-B45B-948D0F417943.jpegA157471F-F848-4F98-8FFD-7B4EF475742F.jpeg353324E6-5D1C-428F-B1AD-84C63C385E14.jpeg1546B774-4FCA-4BA7-B090-FDDE6043524D.jpeg26B87421-FCEA-460C-8405-3B8C0DF01318.jpeg44E78E19-9265-4266-945B-494720943C35.jpeg7129121F-7A31-47A6-8351-A97E1404F933.jpegF3F68AD4-25B1-44AD-BE39-D09DE6A82B2B.png
 
Nice survivor, looks like you’re on the right track. The bed mat is a nice plus !
 
Last edited:
  • Like
Reactions: TX8
Wow, gifted rare rear bumper, mud flaps, and bed mat. Gonna make some people here green!
 
  • Like
Reactions: TX8
Good luck with it... you were gifted a very nice gift with a lot of desirable goodies.

cb
 
  • Like
Reactions: TX8
A little update. I got the Jeep up and running, guess I had some stuck valves so I ended up bending a few pushrods on her maiden voyage. I sent the head out to be reworked, installed a comp cams .496 lift and a new timing set. After a few months I installed the HEI and the rebuilt head. 2 months later I go out to fire it up to start tuning AND...nothing. Figure out it’s not getting fuel. The new fuel pump I put in had a bad diaphragm and leaked my fuel into the crankcase. Emptied out the oil/fuel in the pan. Refilled, replaced fuel pump and fired it up finally. Sounded amazing! Then 30 seconds later....knocking. Spun a freaking bearing. I guess the gas took all the oil out of my bearings. So time to pull the engine and check things out. Real disappointed but she’s close to being back on the road!!
 
Back
Top