• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

carb for my 360

jeep nut

Legacy Registered User
City
harned
State
ky
I was wondering if any body had any input on witch carburetor I should use on my new 360.I AM totally rebuilding it and planning on using a 270 magnum comp cam and 4bbl. It is not going to be a rock buggie just a good daily driver. It is frame off restore so I do not want to beat it up.But don"t want it to flood out on a boat ramp . I had a edelbrock that would not run when you got off the pavement. So what do you all think of the holley truck avenger.or the new edelbrock off road .
 
Just put the offroad needles and seats in the AFB instead of the truck avenger. The off-throttle response/driveability of the avenger just plain sucks. Save your money and go TBI or the like. It's hard to get carbs to do even close to what injection can do though. Also If I were you, I'd go smaller on the camshaft if it's going to be a daily driver. You'll lose quite a bit of vacuum with that bigger camshaft.
 
I tried the Edlebrock 600cfm on my 360. I tried a lot of tuning and the off-road needle seats...I could never get it to run right, on or off road. I'd say to use something else, I run a TBI fuel injection now and it works very well.
 
360

All depends on how many times you want to upgrade. With the 350 in my "Dunes Scrambler" I run a Holley 600 with HD off road float springs and bowl vent tie loop. It does extremely well. I have a 1973 CJ-5 with an AMC 401 (now 418) with a Holley 650 that does well. Both of these will get fuel injected the next time I rebuild them. I've run "Truck Avengers" on both 360s and 258s and have had no problems with them. I've run 1 of the Edelbrock Offroad on a 350 and didn't have to much trouble with it.

Bottom line is if you are planning on keeping your Scrambler long term and can afford to do it correctly the first time you will be much happier in the long run with fuel injection. :twocents:

:wave:
 
325hp 360, ran the Truck Avenger 670 with no problems ever. Had it on 6 or more years. Bought it when they first came out. Worked well on and off road
 
I had a truck avenger on my 304 and loved it. My buddy bought that jeep from me and put on Holly Pro Jection. He removed the injection after a month of constant tuning and adjusting. Never could get the Pro Jection to work as good as the Truck Avenger.:twocents:
 
And the Pro-Jection systems are exactly how Holley single-handedly ruined the fuel injection market too....
 
And the Pro-Jection systems are exactly how Holley single-handedly ruined the fuel injection market too....

But I do LOVE my Mopar/HESCO MPI on my 258, it is my favorite addition to my Scrambler, even better then dual Ox Lockers:thumbsup:

The Pro Jection seems like a great idea, just not executed as well as it should have been/could have been:shrug:
 
Thanks for the input guys. I Think a am going to try a Q jet off of my 350 yj. It has a TBI on it now .I Might try the holley latter.the 360 is eating all my cash right now.
 
Thanks for the input guys. I Think a am going to try a Q jet off of my 350 yj. It has a TBI on it now .I Might try the holley latter.the 360 is eating all my cash right now.

I've heard that the Q-Jet works well as long as the throtle plate bore is not rounded out creating a vacume leak. :thumbsup:
 
Qjet will run well if it is clean, the float level is adjusted properly and the float itself is not saturated with gas. I have seen them run all kinds of stupid steep angles with no problem. Next best thing to EFI.

Another that works equally well offroad is the Autolite 4100. Very similar capabilties.
 
Back
Top