Ok Guys, I need some help. Please!
I am diligently working on sourcing parts for this project, but have hit a snag. Below is the problem.
I have a 4BTA currently set up for a ford manual (from an Oshkosh bread truck) that I am trying to mate up to an NV4500 that I already own. The NV4500 has been converted to work with the chevy 350 already in my Jeep (with Advance Adapters bellhousing). I want to set up the NV4500 and 4BTA in a stock Dodge Cummins arrangement like it would have come from doge in say a mid 90's 4X4 manual. Can anyone direct me to a definitive thread that will help me with this or answer my questions here?
I need to figure out exactly what parts I need to source for the Dodge Cummins setup. I know I will need a bellhousing, input shaft, retainer and starter, but what else? There is currently some sort of adapter on the motor that mounts between the block and the bellhousing. Is this a universal adapter or specific for the Ford bellhousing. I imagine I need to get a different one to work with the Dodge Cummins NV4500 bellhousing, but don't know a part number, etc.
To be candid, this is the exact same post I put up on the 4Bt swaps forum. What I need to figure out is if a mid 90's Cummins powered Dodge pickup has a 2"ish aluminum adapter bolted between the engine block and bellhousing. I imagine it does, but I can't seem to figure out a part #. Does anyone own a mid 90's Dodge Cummins pickup with a manual transmission? If so, could anyone give me some feedback and maybe a part # or PM me a VIN to call a Dodge dealership with? My uncle had a 96', but totalled it when someone crossed the median and hit him head on in a snow storm. I am thinking a Dodge Cummins pickup will have the adapter, maybe considered a flywheel housing, but it may be different from what came with my 4BT/Ford T19 trans setup.
I would be very greatful if someone could help me out. Any leads would be really appreciated.
Thanks!-Charlie