• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Curent pics, lets see em y'all!

Yo Ace

That cage does look pretty sweet.

Two questions for you.........

1. Where did you get the diamond plate on the corners and below the tail gate? Did you make it? I'd like to sets of that, one for each of my Scramblers.

and

2. Where did you get the foam to cover the bars.
 
diamond plate and foam

I have 3 sheets of diamond plate about 5x5 feet and many smaller pieces that I found in the dumpster of a dance club that closed down. I just cut it up with a grinder and a cutting blade and wet sand it. The foam I get from a local dragrace performance shop for about $2 for a 3 foot piece. I don't know if you noticed, but the doors are diamond plate too.
 
Last edited:
Scrambler pics

Hey everyone, to many of you to list, I am empressed with your rigs/Scramblers and all the ideals posted. As soon as I get a picture down to the proper size I will post it on this thread. again nice looking rigs and I hope to meet some of you soon.
Thanks again David "Papa Bear" Mc Ilrath:D :D :D :D :D :D :D
 
Always nice to see the scenes from AZ, especially when i'm freezing my athhh off here in Kansas!

Cool vids too!
 
THANKS!!! Glad you enjoyed them. I think I might have to go grab a sweatshirt before I go out tonight... it is supposed to drop down to 50 or so. :D I certainly don't miss those cold Wisconsin winters... well except for maybe the snowmobiling.
 
finally

Well after 13 months my tub and frame are back together!
It is starting to look like its old self again (only a bit newer)
\
check it out
 
Lookin' Good! I was there not too long ago. It is the greatest feeling when you hop back in and fire it up for the first time!
 
You can come play with me..

Nice shots and videos.

Welcome to the hammered Scrambler Club!

"You have taken your first step into a much larger world"

- Obi Wan Kenobi



Seriously though that trail looks like fun, where is it located (State?)

I need to get a new picture of my shizzy it's looking pretty (Beat up!)

I'm now running 36" TSLs on bead locks and LOVING IT!!!

Until later...

Big_MARK
 
Nice shots, Looks like you are getting pretty close, give us some info on what you've done and and still to come.
 
Details, Details, Details!!! Here goes..........

1983 Scrambler.
Chevy 355 w/ 2.5 exhaust w/ cross over (2)flowmaster 2 chamber.
NV4500.
Dana 300.
Model 20 all the goodies, detroit, 1 piece shafts, weld tubes etc. soon to be replace with 60.
Model 30 PowerLock, Warn hub conversion, 297 shafts, Currie HD tierod, draglink etc. also soon to be replace with 60.
AGR Steering and pump with custom ss braided lines.
Aero 33 gal. fuel cell with skid plate.
M.O.R.E frame plates and motor mounts.
BeCool radiator.
Tom Woods drive shafts.
Aluminum dash, AutoMeter Liquid filled gauges and eletric speedo.
37 in MT/R.

Currently the jeep has a 4in suspension 1 in body that will be replaced with Alcan 6in springs when I replace the axles. I will do a su since most of my excursions are mud related. Just installed Bushwacker "pocket style" TJ style flares last week. I've been working on the jeep for about a year now. Did a complete frame off, sandblasted the frame coated with POR15. Also, sandblasted under the tub coated with POR15. LineX the enitre inside of tube.

What's next?? I'm in the process of designing addtional support tubing for the cage to incorporate MasterCraft Rubicon seats. Mickey Thompson Challenger rims with OMF beadlocks. I hope to have these two items finished by end of Feb.

I'm also looking at the GM HT383 stroker shortblock. My intentions all along were to build a stroker, but have a friend who does circle track dirt racing that made me an awesome deal on the 355. Also, have Edlebrock aluminum RPM heads with an airgap intake, Crane roller rockers to install.

Overall the conversion was pretty straight forward but quite a lot of work especially dealing with the frame. Any yes, as many people have stated here befor POR15 is not skin friendly!!!! I'll try and take some new pictures over the Xmas Holidays showing the new flares and finished dash. The problem is that I now live in Houston, TX but my jeep is at my shop in Louisiana I only get to work on it everyother weekend and on vacation.

Is this enough??? I have several buddies that have a wide assortment of jeeps ranging from cj7,cj8 and just recently a TJ that utilize my shop so we always have some type of project going on. My philosphy is build it right the first time and only spend money ONCE. If you can't afford what you want at a particular moment STOP and save your money, don't buy a lesser component and either break it or have to sell it for pennies later only to buy another component that performs the same task.


cj8jeephead
 
Great, thanks for the info. I just like to know what people do with their rigs and what they use them for. Sounds like the right philosphy when it omes to building it.

Welcome to our board, it will be great to get your input.
 
Like the way you think!

Nice looking rig and Welcome aboard! I like the way you think-Do it once,Do it right-that is pretty much the way i built mine,other than the 4 differant suppensions untill i found the one that works best for my set up-I really tried to over build mine somewhat as not to be breaking alot of stuff-JC:D
 
I am constantly amazed by the detail and expertise some (a lot) of you guys have put into rebuilding your 8s. Jdaigle, that's another great one, thanks for posting the pics and info.

CJ8Rockcrawler - man you gotta bottle and sell that "oooooooohhh" sound from that video when you crunched on that rock! :D Was that your first time banging your jeep like that?

Keep the current pics coming!
 
Back
Top