• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Dana 300 Twin stick project, FYI

jscherb

CJ-8 Member
City
Elmira
State
NY
I just finished installing twin sticks on my Dana 300, based on James Towle’s excellent design and plans as found at http://7slotgrille.com/tech/twin/index.html.

I made some adjustments and improvements and some notes along the way and also documented a way to make custom shift knob inserts for each shifter in the attached PDF.

Definitely worthwhile project, in addition to the additional low range front wheel drive you get out of it, I find shifting between any mode is much easier now.

Just FYI.
 
Nice job on the write-up. I like the stickers. I had older style knobs that were imprinted, so inserts weren't an option for me. I got a set of knobs from a Bronco supply place, Wild Horses, that have the pattern on them. Show us a picture of the finished product, an in-cab shot.
 
jscherb - What would it cost me to have you create a Visio image of an NP-208 shift pattern? Yours looks great. How hard was it to remove the original insert?

I have a D300 knob, and would like to use it with the corrected pattern if possible.

Thanks,
Craig
 
1x1_Speed_Craig said:
jscherb - What would it cost me to have you create a Visio image of an NP-208 shift pattern? Yours looks great. How hard was it to remove the original insert?

I have a D300 knob, and would like to use it with the corrected pattern if possible.

Thanks,
Craig

I'd be happy to do it, and of course for free. See attached, is this correct?


The old insert comes out very easily, just pry carefully around the edges and it'll pop right out. Then use the old insert to trace the size onto a piece of 1/8" plexiglas, I got a piece that's something like 6" x 12" at Lowes for about 3 bucks. Take the Visio drawing down to your local do-it-yourself photo machine, make a print, cut it out, and put it in the knob under the new plexiglas insert and you're all set.
 
Last edited:
jscherb said:
I'd be happy to do it, and of course for free. See attached, is this correct?

Sweet! Thanks man. I'll have to double-check the shift pattern against my t-case. I'll get the vehicle back on Saturday (it's having several things done at a semi-local shop).

Much appreciated. :)

Craig
 
Back
Top