• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Frustrated new member - need help with vacuum lines

DRdalequail

Basic User
City
San Angelo
State
TX
A new member here, but sharing frustrations I see are fairly common in several threads. I have a 1981 CJ-8, 258 6-cylinder. Got several jobs going on presently (e.g., complete brake system) but now I'm fixated on vacuum hoses. What a mess! Can any one point me to a diagram of which lines go where? Standard transmission and no AC. My Chilton manual (1995 ed) is useless in this case. Several videos on Youtube but none (I can find) for a 258 6-cylinder. I think it has a Carter 2 bbl carburetor (not certain on this). Just Empty Every Pocket!
 
I found this diagram very helpful when sorting out my 85. This site offers some easy to read explanations on the various systems as well. Some of this might not apply to your 81 since it didn’t have all of the emissions stuff that later models had.
https://www.gleebledorf.com/vacuhose.html
 
A new member here, but sharing frustrations I see are fairly common in several threads. I have a 1981 CJ-8, 258 6-cylinder. Got several jobs going on presently (e.g., complete brake system) but now I'm fixated on vacuum hoses. What a mess! Can any one point me to a diagram of which lines go where? Standard transmission and no AC. My Chilton manual (1995 ed) is useless in this case. Several videos on Youtube but none (I can find) for a 258 6-cylinder. I think it has a Carter 2 bbl carburetor (not certain on this). Just Empty Every Pocket!
Welcome and good luck with your project.

This is a vacuum diagram for an '81:
'81 Vacuum.PNG

I redid my '83 with the minimum of vacuum lines based on an earlier model year.
If you are going for "off road" use, you may consider pairing down as well.

Ditch the Chilton and download this:
https://oljeep.com/edge_81_tsm.html
 
A new member here, but sharing frustrations I see are fairly common in several threads. I have a 1981 CJ-8, 258 6-cylinder. Got several jobs going on presently (e.g., complete brake system) but now I'm fixated on vacuum hoses. What a mess! Can any one point me to a diagram of which lines go where? Standard transmission and no AC. My Chilton manual (1995 ed) is useless in this case. Several videos on Youtube but none (I can find) for a 258 6-cylinder. I think it has a Carter 2 bbl carburetor (not certain on this). Just Empty Every Pocket!
I understand your frustration, I’ve got an 84 cj8 couldn’t find a decent diagram any were so I decided to clean it up and removed all the but the bare essentials put in hei ignition and it starts and runs better I should also add change out the computer controld carb for a webber
 
I understand your frustration, I’ve got an 84 cj8 couldn’t find a decent diagram any were so I decided to clean it up and removed all the but the bare essentials put in hei ignition and it starts and runs better I should also add change out the computer controld carb for a webber

I did the same when I did my HEI on mine, got rid of ALL of that spaghetti just working backward from the things that HAD to have vacuum.
 
I've been working my way to accomplish the same, but still figuring out what I currently have. Trying to track with the following graphic, but would definitely like to get rid of the excess.


Vacuum Lines.PNG
 
Thanks to those who have sent diagrams. Some have recommended removing all "excess" lines . . . my question is which are: (a) absolutely vital, (b) important, but not vital, or (c) useless. Also, as I pull some to discard I'm assuming that line needs to be plugged. I've seen it done with appropriately-sized screws, and also with what appears to be line plugs (plastic); any difference in effectiveness?
 
Thanks to those who have sent diagrams. Some have recommended removing all "excess" lines . . . my question is which are: (a) absolutely vital, (b) important, but not vital, or (c) useless. Also, as I pull some to discard I'm assuming that line needs to be plugged. I've seen it done with appropriately-sized screws, and also with what appears to be line plugs (plastic); any difference in effectiveness?
A screw is the least effective method as it doesn’t provide a positive seal. I have found the best way is to trace the line back to the source and unplug and use a cap, or if it comes off a T splice just replace the T with a straight splice. Even better would be to use all new vacuum line as you go, because the old ones have probably become brittle and leak-prone at this point.
 
Absolutely vital is distributor. Rest depends on your emissions requirements and how OEM you want it.

Personally: NUTTER the thing and get rid of everything but the distributor and air cleaner for cold weather operation.
 
A screw is the least effective method as it doesn’t provide a positive seal. I have found the best way is to trace the line back to the source and unplug and use a cap, or if it comes off a T splice just replace the T with a straight splice. Even better would be to use all new vacuum line as you go, because the old ones have probably become brittle and leak-prone at this point.

All of this. Even then, you'll need to check the caps occasionally because they can crack and leak. Seen it more than once.
 
Thanks to those who have sent diagrams. Some have recommended removing all "excess" lines . . . my question is which are: (a) absolutely vital, (b) important, but not vital, or (c) useless. Also, as I pull some to discard I'm assuming that line needs to be plugged. I've seen it done with appropriately-sized screws, and also with what appears to be line plugs (plastic); any difference in effectiveness?
If you don’t have emission testing on older vehicles were you live most of it can go away ,look up nutter bypass on line it’s a cheep way of eliminating a lot of the mess our change to hei and a older carb or a Weber and remove the computer altogether,you start at computer under the passenger side of the dash and take it out wire by wire.take your time and it’s not that bad I’ve done it on jeeps as new as 1990 without fuel injection
 
I've been working my way to accomplish the same, but still figuring out what I currently have. Trying to track with the following graphic, but would definitely like to get rid of the excess.


View attachment 91133
That is similar to what I started with, except mine was 49 state (not California)

I'm pretty sure that I used the '79 vacuum diagram, with the exception of the air pump and vacuum signal for it.
Note the position of the manifold vacuum for the spark CTO valve as they are different on some.

If you are running the stock air cleaner and carburetor, I suggest retaining the vacuum controls for the air cleaner components and the fuel bowl to charcoal canister connections as well.

As suggested... the Nutter Bypass and ignition upgrade are well worth your time.
I retained my distributor and did the upgrade to TFI coil, cap and wires along with a new timing advance spring.
I'm not sure if HEI was a thing back then or I was too cheap to spring for the conversion. :shrug:

'79 Vacuum.PNG
 
Back
Top