• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

It's been 20 years but finally bought another Scrambler

pjevolley

New member
City
Kingsville
State
MO
Just bought this One owner, all original, low miles CJ8.. Looking for ideas on rear racks, bumpers, brush guard, lighting, etc.. Would love to convert all the lights to LED.. Also would like to add a 3/4 bikini top.
It's been sitting for 10 years so there is allot of maintenance work to do.. Any suggestions on mechanical upgrades/improvements to think about? I am replacing the fuel tank, brakes (master cyl, calipers, rotors, drums, etc) all fluids, etc...

Thanks!!!
 

Attachments

  • 20190602_174104.jpg
    20190602_174104.jpg
    143.8 KB · Views: 102
  • IMG_19371.jpg
    IMG_19371.jpg
    178.3 KB · Views: 100
  • jpeg-imag1.jpg
    jpeg-imag1.jpg
    198 KB · Views: 100
Awesome find! I like the stock look. Assuming its a 6 Cyl 258 engine, my first upgrade would be to get rid of the Carter carburetor and put on one that is more reliable or even go with some sort of TBI fuel injection.
 
Wow :eek: I’d condition and polish that paint straight off, I bet that thing shines like mad with some attention.

Unless you’re going to replace the engine with something else I’d try to get it running and driveable as it sits. Go through the brakes, steering, fluids, etc. but I’d get what you have going and then start from there. If you start in on upgrades as you’re trying to bring it to life and run into issues, you won’t know if you’ve done something wrong with the upgrade or if it’s a legacy problem.

Awesome find and good luck with getting it back on the road. That’s the kind of find we all dream about! :cheers:
 
Great Scrambler. My favorite color too, Sebring red :drool: Put me in line of you decide to sell it. Put some time in and buff the oxidation out of that paint. Is it currently running and driving?
 
Wow, what a score ! I'd keep it simple, go thru the basics (get to know her....) and see what she needs after a year or so. If your selling those rocker guards, I'd be very interested!
 
Absolutely, the plan is to clean, clean, and clean some more the polish and seal the paint. It is the 258, 4 speed. Upgrade ideas at this point are exactly like what AJ2393 suggested. I will look into fuel injection system instead of carb. That will make it better in the winter also. I really would like to put full racks in the rear so I can haul the kayaks.
 
Got it off the trailer and started cleaning.. Looks like the original paint will look like NEW after some polishing.. All the brake parts are arriving today along with fuel tank and pump.. I had it started just by priming the carb.. Next step is to replace the carb and ignition and get rid of the rats nest of vacuum lines and wires...
 
Rack I built for mine. I have a hand drawn "print" of how to make it I can send.
P1010689 resized.jpgP1010690 resized.jpgP1020034 resized.jpgP1020035 resized.jpg
 
Man I like this Jeep. They did a nice job matching the windshield frame paint. This Jeep will look great when you’re done. Post lots of pics!!
 
It is on the old fashion 3 inch pipe bumper. 1 1/2 inch Dia bearing style piviot. Other end rest on a stop. With upper anchor points where in the inside rear supports are bolted through. You can see the "T" handles in the pictures. This was the second one I built. I also have the same thing on my LJ, and have the parts cut to do a 3rd for my CJ6 when build the bumper. I will post up the "print" in thread in the fab section.
 
Nice! It looks a bit like one I bought recently as well.
If you are thinking about changing your tire carrier would you be interested in getting rid of the original? I have been looking for one in good shape to put on mine.
 

Attachments

  • 624DA61E-9EE5-4167-B81B-900826C588C8.jpeg
    624DA61E-9EE5-4167-B81B-900826C588C8.jpeg
    133 KB · Views: 28
  • E2E9041C-E05B-4AC9-BBA2-EFB51815F175.jpeg
    E2E9041C-E05B-4AC9-BBA2-EFB51815F175.jpeg
    132.6 KB · Views: 28
Good looking Cj8. My ‘84 Scrambler had the tire mounted to the driver side diagonal roll bar. I often used it as a rifle rest when hunting. But now that’s illegal and you’ve got to have at least one foot on the ground. Dumb thing is that shooting from a dog box or truck bed puts the bullet into the ground if you miss the deer. A bullet fired from standing on the ground goes a lot farther.
 
UPDATE!! Getting close to being on the road!! 3 months of work so far..
 

Attachments

  • 50CF9242-9D56-4BB2-B461-50AF9EB303BD.jpeg
    50CF9242-9D56-4BB2-B461-50AF9EB303BD.jpeg
    202.3 KB · Views: 36
  • 0186E3B0-AC43-4A8F-93A4-D7D893799DED.jpeg
    0186E3B0-AC43-4A8F-93A4-D7D893799DED.jpeg
    147 KB · Views: 38
  • 0A17F726-7806-4629-8672-4C67E9AFD46E.jpeg
    0A17F726-7806-4629-8672-4C67E9AFD46E.jpeg
    174.5 KB · Views: 38
  • F0101047-8395-472F-852C-11CA600DD70C.jpeg
    F0101047-8395-472F-852C-11CA600DD70C.jpeg
    179 KB · Views: 38
  • BFBD41AF-50B0-4EB2-B05F-F6E70BB0CEC9.jpeg
    BFBD41AF-50B0-4EB2-B05F-F6E70BB0CEC9.jpeg
    171.3 KB · Views: 36
  • 742221FB-50F3-4752-BCB2-7F387C31ECB0.jpeg
    742221FB-50F3-4752-BCB2-7F387C31ECB0.jpeg
    161.1 KB · Views: 34
Back
Top