• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Larger Spare Tire on Roll Bar Mount

PalmettoJeep

Basic User
Anyone have suggestions, or examples, of oversized tires mounted on the traditional roll bar mount?

I'm not wanting to go crazy, but even a 32" tire doesn't look like it will fit on the OEM bracket. I see "Dead Jeep" offers a brakcet they same they can tweek to accommodate a somewhat larger tire, but they seem pretty pricy. Have others just modified their OEM bracket, or simply given up on the roll bar mounting location entirely. Thanks.

 
Kim, thanks for the reply. It isn't really a matter of depth, so a wheel spacer wouldn't really help.

I should have been more clear in my original post. Rather it is a larger total diameter of the tire will be impeded by the the hump in the bed caused by the wheel well undereneath. It looks like a 30" tire is about the largest tire that will fit. I've not tried but maybe an under-inflated 31" tire could squeeze in.

Repositioning the spare tire mounting bolts on the factory rollbar mounting bracket might work (as opposed to moving there the bracket itself is mounted on the roll bar). And I'm hoping someone might either have a pattern for that or know a more reasonably priced vendor who makes one. Thanks.
 
I had one made here by @scott anderson a while back. It lets me put a 31x10.50 on the rollbar mount.

Doesn't look like the pics survived that long, but I'll try to take some next time I'm around the Scrambler.

 
Kim, thanks for the reply. It isn't really a matter of depth, so a wheel spacer wouldn't really help.

I should have been more clear in my original post. Rather it is a larger total diameter of the tire will be impeded by the the hump in the bed caused by the wheel well undereneath. It looks like a 30" tire is about the largest tire that will fit. I've not tried but maybe an under-inflated 31" tire could squeeze in.

Repositioning the spare tire mounting bolts on the factory rollbar mounting bracket might work (as opposed to moving there the bracket itself is mounted on the roll bar). And I'm hoping someone might either have a pattern for that or know a more reasonably priced vendor who makes one. Thanks.
This one is supposed to allow mounting of the stock CJ 5x5.5 bolt pattern.
(There are others as well)

Would raising it up allow for enough clearance to the bulkhead/cab (assuming that is what you are running) for your planned tire size?
(mine is still in pieces and my memory sucks)
 
I was able to install a BFG All Terrain, 31x10.50x15, on an OEM 7" chrome wheel, on the OEM rollbar tire mount on my green Scrambler. It fit, not much room to spare between wheel well or hard top.
 
I had a 31x10.5x15 tire mounted on a “poverty” rim mounted to the roll bar. This was a pre-shoulder belt ‘82 rollbar. It all fit fine, but not much room to spare.
 
Might consider a custom mount like the one on this CJ8, not my jeep…
 
Back
Top