• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Locker Experiences

Major Jack

Legacy Registered User
City
Zillah
State
Wa
What locker are you running front & rear? Likes - Dislikes?

Does the Dana 30 in the Cj8's come with a 27 or 30 spline axle? What standard width axles fit the 8? Really don't want to go extra wide. Want to keep it with stock springs. I have a spare frame and tub I need running gear for. What should I be looking for? Oh yea, this will be a daily driver / hunting rig.

I have a friend with a Ox 29 spline for a Dana 30 he wants to sell. Are they any good?

Thanks in advance.

Captain Jack
 
I have ARBs front and rear. I like them, key thing is being able to engage/disengage as needed; it keeps good street mannors that way. They've been around a long time for good reason, they're good. The 2 things a bit negative...price and the need for an air source with plumbing. I use an ARB compressor and never had an issue with the plumbing in 7 years. Once I had to replace an o-ring on the compressor tank, ARB sent me one, plus a spare, for no charge. It was a very simple fix.
 
Locker choice depends upon use of vehicle and location. What are your plans?
 
Kohldad,

Daily driver / hunting rig in mountains.

By the way, I used to know your area quite well. When i got out of the Navy in 1970. I became a police officer in Charleston for quite a few years. I lived in North Charleston by Remount Road. Then moved downtown off Broad down near the Battery.

Loved the great Southern cooking.

Captain Jack
 
Kohldad,

Daily driver / hunting rig in mountains.

Good snowy 4x4 driving is a requirement for you in AK and if it's a DD, right?

If that's the case, you can't do any form of non-selectable locker in front IMHO.

Options as I see it:
1) lock up the rear with a Detroit or lunchbox locker and leave the front open (not optimal for snow, but ok if you leave the front open)
2) do a selectable front (ARB, OX, Ected) and Detroit/lunchbox rear (better, but still not optimal because of rear non-selectable)
3) Selectable front and rear (best for everything all around, but most $$$)

Unless you're planning on adding 33-35" or larger tires and/or a large engine, I would not bother changing axles for your use. No point for what you're talking about, too much trouble and there's no simple swap front and rear without going wider or having to cut down axle housings/shafts.

Only thing would be if you could find a WT CJ D44 (not sure of the year on yours if it's WT/NT?). Otherwise I'd do one-piece axleshafts in the AMC20, weld the tubes to the pumpkin and maybe truss it (along with whatever locker you go with).

My thoughts anyway.
 
I have a Detroit in the rear and it does not like side hills and snow. Rocks, mud, sand its fine. I would go for a selectable front and rear up there.
 
Been swamped for last couple of days.

On the lockers, you definitely don't want full time lockers because of all the snow. For what you describe, I would go with a set of True Tracs. It is a torque bias traction device. When one wheel starts to slip, it applies a stronger force (usually about 1.7x) to the non-slipping wheel. If a wheel lifts off the ground, slight application of the brake is usually sufficient. Nice thing is, that in normal driving, you don't even know it's there.

If you want a full locker, you can step up to the e-trac which is a true trac when disengaged and a spool when engaged.

Only problem with both of these is that you have to disassemble the axle and have the gears set up.

If you want cheap, put a rear lunchbox and go.

On the axles, stock axles, once the rear is upgraded to 1-piece shafts, will handle 33s and even 35s. My stock axles are under my friends 7 and held up well for several years with 35s. Even with the T18 and some skinny pedal use.
 
I'm running lunch box lockers front and rear currently with stock axles and 33's. Little dicey in the snow unless it's really heavy. I have a T5 tranny, and the lucnhbox tends to make things torque up and release when coasting around corners. It acts like the driveshaft is torqueing forwards and back causing the jeep to hop a bit unless I pull it out of gear. Supposedly this is common in light vehicles with a lunch box. So, I'd stay away from those if you're going DD it.
I've been considering an Auburn Gear ECTED, just trying to decide whether to swap axles or not.
 
On the lockers, you definitely don't want full time lockers because of all the snow. For what you describe, I would go with a set of True Tracs. It is a torque bias traction device. When one wheel starts to slip, it applies a stronger force (usually about 1.7x) to the non-slipping wheel. If a wheel lifts off the ground, slight application of the brake is usually sufficient. Nice thing is, that in normal driving, you don't even know it's there.

I agree with Kohldad here, I have Trutracs front and back and they are perfect for what you want to do. As long as you aren't going anywhere that you'll be lifting a wheel off of the ground they should function fine. They operate on the road without problems. I drive mine way more on the road than off road.
 
Back
Top