New guy here...not my first go round though
traded my CJ buggy for a Scrambler this past summer

the buggy was a very capable crawler, 355 sbc, rv cam, th350 and an Atlas. 60/14b with 5.13s, 43” tsls
I had a bunch of time into getting it to this point, but with 2 young kids at home I knew I’d need a 4 seater at some point...
found this and made a trade

82 CJ 8, LS/4l60e/205, 14 bolts F&R, 5.38 gears, Fox coilovers and King bumps.
I kept some parts from the buggy and knew I’d be making changes to the Scrambler. The motor runs fine but the wiring was a mess, the TJ front clip bugged me, the color was not my cup of tea. Some changes were made pretty quick, got my seats and bumper on, re did the fuel cell and added some storage just before my first wheeling trip with it





found some half doors. Needed to remove the plastic interior panel to fit around the hip bar.

Got CJ front clip on last week
[URL=http://s160.photobucket.com/user/mattyarnallcc3/media/C0DC82E8-F0BA-4235-AF80-3F3AE2FB3D90.jpg.html]
t
next time I get in the shop I’ll gut the grill to fit this big Griffin rad

I’ve got a pile of parts that need to go on, but with 2 little ones and a new house, time is scarce.
I’ll address the wiring with a PSI Conversion harness and a couple Blue Sea fuse blocks
gotta plumb in a new trans cooler/Spal fan
Ceramic Hooker headers to dress it up some, Ive also been considering relocating the coil packs and a nice set of valve covers...
lots of small stuff, rock lights, trans temp gauge, the list goes on...
I’ll be painting it when all the body work is finished.
traded my CJ buggy for a Scrambler this past summer

the buggy was a very capable crawler, 355 sbc, rv cam, th350 and an Atlas. 60/14b with 5.13s, 43” tsls
I had a bunch of time into getting it to this point, but with 2 young kids at home I knew I’d need a 4 seater at some point...
found this and made a trade

82 CJ 8, LS/4l60e/205, 14 bolts F&R, 5.38 gears, Fox coilovers and King bumps.
I kept some parts from the buggy and knew I’d be making changes to the Scrambler. The motor runs fine but the wiring was a mess, the TJ front clip bugged me, the color was not my cup of tea. Some changes were made pretty quick, got my seats and bumper on, re did the fuel cell and added some storage just before my first wheeling trip with it





found some half doors. Needed to remove the plastic interior panel to fit around the hip bar.

Got CJ front clip on last week
[URL=http://s160.photobucket.com/user/mattyarnallcc3/media/C0DC82E8-F0BA-4235-AF80-3F3AE2FB3D90.jpg.html]
tnext time I get in the shop I’ll gut the grill to fit this big Griffin rad

I’ve got a pile of parts that need to go on, but with 2 little ones and a new house, time is scarce.
I’ll address the wiring with a PSI Conversion harness and a couple Blue Sea fuse blocks
gotta plumb in a new trans cooler/Spal fan
Ceramic Hooker headers to dress it up some, Ive also been considering relocating the coil packs and a nice set of valve covers...
lots of small stuff, rock lights, trans temp gauge, the list goes on...
I’ll be painting it when all the body work is finished.













