• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

My first cj8 project

I was reading on here and seen a post about heater motor upgrade, Thought i would do it before i forgot and started to paint. See pics of how i cut hole out to make it bigger. I used a 1/8 x 2 flat steel and bolted it across the hole for the hole saw to drill into and it worked some kind of nice. I used a 3 1/2 in hole saw. Hope it helps some one down the road

Thanks Curtis
 
I was reading on here and seen a post about heater motor upgrade, Thought i would do it before i forgot and started to paint. See pics of how i cut hole out to make it bigger. I used a 1/8 x 2 flat steel and bolted it across the hole for the hole saw to drill into and it worked some kind of nice. I used a 3 1/2 in hole saw. Hope it helps some one down the road

Thanks Curtis

Nice! Thank you. We need a "How To" forum where we can keep all these useful tidbits and tutorials. There is only so much I can keep in my head.

How are you planning on fixing that frame?
 
The tide has turned :cheers: :cheers: :cheers: :cheers: started to put it back together this week, Lift kit,fuel tank,brake lines and a bunch of other stuff on order, Tub,hood ,finders,and gril at the body shop. Rears are all most ready. I have spent way more $$$$$$ allready then i thought, I am in to far to stop now :D

Tryed to post a pic NO LUCK :banghead: :crazy:
 
Last edited:
Good to hear it is going back together Curtis:thumbsup:........I think you always spend more than you plan on going into it, I know I did.:D What lift did you get?:cheers:
 
Great progress Curtis! Tried to call you back but I guess you were working on the project. Giive me a call when you get a chance and we will compare notes.:cheers:
 
Back
Top