• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

My Scrambler Substitute

Here is a shot of the stock 225 engine from the 70 Commando partster I have. You can see how the engine lines up with the crossmember and where the valve covers are in relation to the firewall.

IMG_2710a.jpg


Now here is a cropped picture showing where the 4.3 sits. Remember, I have a 1.5" body lift on mine that the partster does not.

IMG_2704a-1.jpg


You will note that I have not mentioned a radiator yet. I do plan on using one, but we decided to get everything else in first then put the front clip and DJ grill on (that's right, a DJ grill - and hood!). I plan on getting an aluminum 3 or 4 core and will run a transmission cooler as well.

With Oak Ridge coming up fast and a lot of work to do yet its going to take some luck. Nick (Ted's son) and I are in a race to see who gets finished first; Ted and I on the Commando or Nick's "new" Scrambler.

As a back up I am going to register my Scrambler for Oak Ridge :eek: . I plan to be right in line behind Ted's "exhibit" so I know there won't be any trees limbs in the way.

I hope the Commando makes it - this is going to be one cool ride! Ted Wendel is the man!:bow:
 
Git-Er-Dun!!

Looking good Richard! That's nice progress.
 
I have always thought that Commandos looked really nice with a CJ clip. Here is a pic of one I saved from somewhere at some point (although it looks like YJ fenders were massaged to fit):

hpim0374-1.jpg
 
Bear Claw said:
Thats a Commando?:confused:

Yes, it is. It is amazing how similar the Commando and Scrambler are. The one in the picture is an AMC C104 Commando. They have a 104" wheelbase with the front hood stretched 3" to accommodate the AMC straight 6 engines. Also came with a 304 V8. With only minor adjustments a CJ front clip can be put on them.

My "Scrambler substitute" is the earlier Kaiser C101 Jeepster Commando. They have a 101" wheelbase and had Buick 225 V6's like the early CJ's. You can put a CJ front clip on them as well but you must use the shorter early CJ front clip. When finished my "substitute" will have a DJ front grill and hood (DJ and early CJ hoods are the same) for a somewhat unique look.
 
Scramber Substitute update!

Okay, Ted and I are pushing hard to finish my "Scrambler Substitute" (better know as "Goose") for the September Oak Ridge trail ride. With a little luck I think we will make it!

Here are some pictures of the progress to date:

Work tent (don't have to keep a tarp on it anymore and can work in the shade)

7-8-08download001.jpg


Engine is complete and runs (sounds awesome!!!). Check out the length of those front shocks! They are next to the longest they make!

7-8-08download032.jpg


Custom postal grill

7-10-08download004.jpg


More to come...
 
Great to see an update on this Richard.

When I saw that engine, I assumed it was FI...
 
Check out the ground clearance! At 6' 2" the floor hits me about mid thigh with the 35" tires. If I go any taller I will need a step ladder to get in this thing!

7808download081-1.jpg


Most of the time I plan to run without a top but in the winter it will put the half cab on it:

5508download032a-1.jpg


6" Bushwacker pocket style flares are off until we get the wirng and rear axle done. I got the radiator off ebay, it is a huge Griffin from a 454 engine and has a 16" electric fan so there shouldn't be any cooling issues. The front axle is buttoned up and Ted modified a FSJ steering box support to fit the Commando frame. The hydroboost system is complete except for the hoses and power steering pump belt. Ted made up custom transmission lines for the TF999; the 18 gallon Scout tank and FSJ filler are in; Super Wagoneer tilt column and Saginaw steering are complete; and lots more.

We will begin the wiring job once the VDO custom gauges come in and I decide on a design for my controls and auxilary gauge panel.

Still a lot to do but we are getting their!
 
bigwalton said:
Holy crap, that is just HOT!

So you'll be doing a half cage for the front, anything in the back?


Wait until you see what it looks like with the flares! Goose is going to be a one-of-a-kind rig and cool to the max, if I do say so my self! No cage on this one, my plans are a Scrambler type roll bar behind the bulkhead (custom bulkhead, not the factory one).

Here are a couple pictures of my gauge mock-ups. First, the panel in front of the steering column (The volt meter was the only picture I could find oriented like I needed to paste into the mock-up but I think you can see the look). The VDO 85 mph speedo will be on the left and tachometer on the right:

Goosespeedotach1.png


This is the auxiliary panel that will go over the radio hole and speaker louvers in the center.

Goosegaugemockup1.png


Also working on a custom switch panel for headlights, wipers, etc.
 
Grantshire said:
No cage on this one, my plans are a Scrambler type roll bar behind the bulkhead (custom bulkhead, not the factory one).

I thought this was to be the real wheeling rig to "substitute" for the Scrambler??? :confused:

I have some used gages I pulled out of a parted XJ that I have intended for a panel like that, one of the many "nice to have" projects that might not happen until I retire :rolleyes: Can't wait to see them installed.
 
bigwalton said:
I thought this was to be the real wheeling rig to "substitute" for the Scrambler??? :confused:

I have some used gages I pulled out of a parted XJ that I have intended for a panel like that, one of the many "nice to have" projects that might not happen until I retire :rolleyes: Can't wait to see them installed.


It is, I just don't like front cages (pulled one out of this rig when I bought it), they get in the way of my feet.
 
Grantshire said:
It is, I just don't like front cages (pulled one out of this rig when I bought it), they get in the way of my feet.
Take a look at Robert's and my cage. It doesn't go to the floor, so nothing around your feet. It attaches to the cowl/dash.
 
John N said:
Take a look at Robert's and my cage. It doesn't go to the floor, so nothing around your feet. It attaches to the cowl/dash.

Commando has a different dash. However, I have not closed the door on this yet.
 
Grantshire said:
Commando has a different dash. However, I have not closed the door on this yet.
I'm sure, but the principle is the the same.
 
Looks great, Richard! Your dash looks just like mine!;) (although mine doesn't run nearly as well as yours....)
 
A couple of more pictures:

Frankenpedal! Made from a combination of Commando/FSJ/M715 parts

41408download065-1.jpg


Dana 300 Twin Stick set up. Ted had to do a lot of fabrication to bring the twin stick forward enough to fit the Commando Dana 20 hole.

41408download013-1.jpg


The master at work!:bow:

102207download023-1.jpg


There is a lot custom fab work on this rig to marry Commando, CJ, FSJ, M715 and GM part together but it is really looking great. Center console with auto shifter, seats, doors, wndshield, nerf bars so I can get in and out of this thing, and more are coming soon so stay tuned!
 
Back
Top