• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Need a little prayer

When you put the Silicone adhesive for the window in and then place it on the car. Go around the window edge and push that bead down flattening it. This will be sure to push the adhesive into any little cracks or gaps in the seal that there are and stop those little trickles.

The guys on Powerblock did that the other day while installing the windshield on the Buick I think it was.

Once the bead is all smoothed out then put the chrome back on.


But like you said it is one more chance to get the headliner right.


Carl

Car looks great, Crash! Bummer on the glass...you know you wanted to restretch the headliner anyways.

We've masked around the windows and then used urethane in a big caulking gun- lifted the gasket, slid the nozzle around, pressed the gasket down, cleaned off the excess, and removed the tape. Works great.

I am a pro at these windows now,lol.
 
So I got the rear window pulled. Again it was like the front and came out pretty easy and I got a new set of tools that helped a bunch,lol.



dad457.jpg
 
So I am the typeof person who always looks at the brighter side--with the rear window out I was able to spend some good time on the headliner and I got it MUCH better. Now I am happy with it.



dad458.jpg




Done came over and gave me a hand and got the front/rear windows in. I then proceeded to seal the rear window. I am hoping to have the rear trim here today or tommorow.



dad459.jpg




MUCH better...



dad460.jpg
 
I spent all last night getting the windshield sealed and trim put on. Since it was new trim it took some work to tweek it. One problem I had was getting it to clip into place and thought it was due to the trim not bent right. I found the clips that came with the trim were junk and not holding. Luckily I had a couple bags of good clips and replaced some and it held the trim in place... But its loooking better and better.



dad461.jpg
 
So my dad stopped by work to drop me off more stuff.



Its kinda funny as he came into the shop and on my laptop my background is a good picture of the car and luckily I was quick enough to cover it up...



But I got home and dug right into it and started with the truck. I installed all new plugs and new drains for the rear quarters.



I also got a new bezel for the trunk lock. Damn release pin for the lock cylinder was rusted into place and took some work to get it to release. But got the new one on and it really looks good--shiney stuff..



dad462.jpg
 
I also got the new tail lamp connectors so I dug into the last of the wiring on the car.



Got it all done..



dad463.jpg




dad464.jpg




dad465.jpg
 
I also got the hurst reverse kit/switch.



dad466.jpg




By the instructions I thought it was going to be harder but it went very smooth and got it installed in no time.



dad467.jpg




dad468.jpg
 
I was just itching to see so it was time for a light test.. YES--we have reverse lights!!!!!



dad469.jpg




dad470.jpg




SO the list of electrical items I need to resolve. No brake lamps(I could have sworn I had brake lamp voltage before). The front park lamps work with the park switch on but go out when I turn the headlamps on. The horns don't work.
 
I also got the "missing" panel the car never had (well since my dad has owned it). So tonight I am going to pull the bumper and get the panel fitted, bumper brackets taken care of and get Don to get it to CT's so we can get it painted (along with the door plugs).



dad471.jpg
 
Looks great, Crash. The headliner looks 100% better.
 
Crash, I have to say this has been simply amazing. I also didn't realize your dad had not seen it yet. He is going to love it. I am so happy that he is doing better. Thoughts and prayers are still with you.

Truck
 
Looks great, Crash. The headliner looks 100% better.

Ya I can be happy with how it is now......

Crash, I have to say this has been simply amazing. I also didn't realize your dad had not seen it yet. He is going to love it. I am so happy that he is doing better. Thoughts and prayers are still with you.

Truck


Thanks Truck.....
 
So sunday was a hard day for me. We had an issue with the rear trim either not being shipped or my dad forgot to order it. On the shipping invoice it showed not being on the order. So I got a call from my mom that they were on the way out. When they showed I turned the shop lights off and ran outa the shop closing everything so he could not see the car.

It was VERY hard to not let him in to see it.....
 
Just think how cool it will be when you get to do the big reveal...
 
So sunday was spent basically doing one thing and that was fitting the new panel, bumper mounts and bumper. It was very slow work between having to pull the bumper on/off dozens of times..

dad472.jpg


The inner brackets were ok but required a little notching. But it was the mid brackets (outer bracket goes from the bumper to the fender) that required the work. I made new plates where the mid bracket sits/shares the main bracket mounting bolts.

dad473.jpg


Lopped off the old plates and reworked the rest of the bracket and then welded them to the plates. I am not sure if its the new bumper or the fact the old one was bent that made the old ones not fit--but they do now.

dad474.jpg


So now its ready for paint.

dad475.jpg


Pulled it and Don came and grabbed it to take to CT's to get painted. I also painted the brackets and undercoated the area where the bracket sits on the framerail (had to go around it before).
 
So today was spent doing lots of little stuff.

Got the new edge seals mounted. I was impressed with the quality of them and they fit nice.

dad476.jpg


I also got the door bumpers all installed--tricky little guys...

dad477.jpg


Since the stock shifter boot would not work I took a chance and had him order a later model (70ish) for a hurst shifter. It was perfect.

dad478.jpg
 
Vacuumed the carpet and installed the floor mats my mom had gotten for the car.

dad479.jpg


I had a pile of handles to choose from. I went and polished them up and threw them on. The ones for the rear windows are in a little rough shape but not bad--front ones are in perfect shape.

dad480.jpg


So the only thing left do to on the interior is install the chome base cover for the shifter when we get it..
 
Back
Top