• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

new lurker

jg_99

Legacy Registered User
City
Richmond
State
tx
Hate to admit it, I have been lurking.

My names Jim, and I live in Houston Texas. I have been reading a lot of posts to educate myself.
My wife and I have had several Jeeps, 05 unlimited and recently 2008 2 door Wrangler (Sahara)
Her job required a new 4 door car. The Wrangler had to go.

I have always liked the jeep scrambler. Now seems like a good time. I am having a hard time deciding where to start. I do not want something highly modified. We have 2 classic Mustangs, a 65 couple that is finished, and a 67 coupe that needs restored. (Plan to sell one or both. No room)

There seems to be a lot of modified scramblers out there. A popular mod appears to be adding a V8. Any opinions on this. Also guidelines on what a CJ8 should cost, I know it depends on age etc. but what's a rule of thumb.

Jim
 
Welcome!

I'm sure more people than just me would like to see some pics of the Mustangs.

As far as modification/cost, there are different schools of thought. My 82 was an original owner, unmolested 4 cyl with 4 speed. Probably should have gone a full restore, but that's not my style. No power, I went the V8 route, along with just about everything else. I'm not a purist, I love the style and utility of the Scrambler, but I want modern power and the driveability of fuel injection, along with all the other goodies. I plan on using mine, both as a daily driver and as a trail rider.

On the other hand, if mine was a similar condition vehicle with the straight 6 and a 5 speed, I'd probably go the restoration route with minor tasteful mods. Would I be happy with this? (Probably not...too much of a power junkie...)

A V8 is only worth as much as the install, and I have seen my share of poor installs. Cobbled wiring, spliced hoses and fuel lines, booger welded mounts...this all detracts from the value, IMHO. A properly installed V8, one that appears factory installed, is the only swap that increases value. I know I'll get some flak on this, but I feel a good V8 swap should be a modern engine design, with fuel injection. I can't justify going to the trouble of a swap just to install a 70's-80's small block with a carb and old school distributor. Again, my opinion.

Cost is closely related to the amount of rust/body damage. Secondary is the modifications. I'd look for one that is as close to stock as possible, with little to no rust. Then you have a blank canvas, to make your own. Restore if that's your passion, or make it as custom as your imagination allows. I don't think anyone really gets into these things with the intention of it being an investment- there are other ways to turn a buck with a lot less work. You won't get rich owning a Scrambler, but the satisfaction and uniqueness are priceless.

Good luck and keep us posted!
 
Last edited:
Thanks for the reply
Your ideas help confirm my thinking. Prices seem to be all over the place. in your opinion is 10k give or take a good buy for an original cj8 with no rot, some surface rust. There is a v8 conversion in cali (3rd party forum) that looks interesting.
 
I agree a lot with Randy. I however, am more of the purist and love the original look with some slight mods. If you've been keeping an eye on the sale forum you've probably seen a lot of Scramblers in vairing conditions for sale at a lot of different prices. Some people think because the CJ-8 was produced in fewer numbers it is some sort of "rare" collectors vehicle. It's not. It is more rare then a CJ-7 or CJ-5 but it is by no means rare. I find CJ-8's for sale all over the place every day. Very nice original (everything including paint/decals) Scramblers were going for around $20k before the economy tanked. Now they are in the $12k - $18k range depending on options (most people want the 6 cyl and 5-speed). Red Mistress just picked up a beautiful all original Scrambler in that price range. Most good running Scramblers with minimal rust (surface rust or very minor rust holes) tend to go in the $8k - $10k range. Good Scramblers that are a little more of a project and need some work in the $4500 to $7k range and total projects or rust buckets go for less. Those are some guidelines only and it seems that Jeeps in TX tend to command a higher price by 1 -2k. Hope that helps and good luck with your search!
 
Last edited:
well said

Randy and Polarfire said it well if your in the market take your time and look around, one thing i would advise is make sure and check it out in person don't go my pics or words alone which i'm sure you know judging by your collection already, always check the fool pans for rust through carry a small magnet to test for body filler.......i wish you luck with your search and if we can help just shout :woot:
 
it must be a wisconsin thing, but i cant find scramblers around by me at all. i've only seen 1 other scrambler in good condition in my whole life. i had 3 rust buckets for parts, but nothing nice. people in the south are lucky
 
I drove 10 hours each way to get mine last September. I searched for a long while. Saw a few 4 cyl models in the Carolinas, but waited to find a 6. Good luck.
 
Modified Scrambler

How modified are you looking for? Mine is modified somewhat. 5.7 Vortec, Atlas II Transfercase with twin sticks, Turbo 350 Auto Transmission, Dana 70 rear, 60 front, 5:13 gears, 4 Link rear, 3 Link front with coil overs. Chormolly shafts all around, 39.5 BFG Krawler Red Label tires, Beadlock Specialities sheels, Aluminum fuel cell, Aqualu tub, fiberglass hood, 8000 lb winch with remote. Besides that pretty much stock.
 
Forgot to add something, freshly bobbed bed.





Sorry though, not for sale at this time.

Good luck in your search, there are alot of them out there.
 
How modified are you looking for? Mine is modified somewhat. 5.7 Vortec, Atlas II Transfercase with twin sticks, Turbo 350 Auto Transmission, Dana 70 rear, 60 front, 5:13 gears, 4 Link rear, 3 Link front with coil overs. Chormolly shafts all around, 39.5 BFG Krawler Red Label tires, Beadlock Specialities sheels, Aluminum fuel cell, Aqualu tub, fiberglass hood, 8000 lb winch with remote. Besides that pretty much stock.

Sounds and looks pretty much stock to me. :thumbsup:
 
The frame is still pretty much stock. Steering column, brake and gas pedal still stock, dash knobs and speedo still stock, oh yah, wipers still stock. A few other little odds and ends. Sooooooo pretty much stock
 
I agree with everything said thus far re prices. They are all over the place. But if you study them daily like most of us here with the affliction, you'll ID a good deal and a bad deal very quickly. Start your search and look, look, look. Call, email, get to know what's out there. Become very familiar with the 8, options, colors, etc. Decide what you really need it for, then get serious. I expanded my search 7 hours away (Atlanta) via Craigslist. Contacted the seller and was satisfied that he was striaght up and not scamming me. Got bunch of pics and honest description and sent a deposit and drove up and picked up 3 weeks later and very happy. It's risky tho. In your search you'll hear names come up over and over again as great sellers--good sign many times and good sources to start. Good luck. :thumbsup:
 
Back
Top