• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

New to the jeep world

navyjeep

Basic User
City
Jacksonville
State
Fl
Hey everyone. I'm new to jeeps. I have always wanted one but want sure what I wanted. Plus being active duty makes it challenging to have a project. But I have decided it is time for me to start my project jeep and I have decided that I want a CJ-8. Any advice on what are the biggest things to look for when I buy one? I would appreciate any advice you would like to share.


Thanks.
 
Rust, for one thing but I'm sure you know this. They are prone to gas gauge failure too. You didn't say what engine size you prefer. So that is also a consideration. Don't expect great gas mileage as they are geared on the low side.

Most importantly Jeep fever. There is no known cure. You can relieve the symptoms by driving up steep hills, slinging mud and going most places other four-wheel-drive vehicles can only dream of going! If this doesn't help with the symptoms. You could try modifying your Jeep. It has been known to offer temporary relief.

Welcome to the forum and the word of Jeeps.
 
Welcome to the Forum. I am a fellow active duty member who finished a full restoratino/build of my Scrambler during a "non-deploying" billet I had for 4 years(took me 16 months).

If you are just out looking for a Scrambler try to find one with as little rust as possible, both Frame and Body. I had to purchase a replacement frame for mine which was a big chunk of change. I intended to start small but ended up going full-bore on the build which in-retrospect worked out but may not have been the best way to approach it being in the Military.

What I recommend: Find a partially completed project or a solid foundation of a Scrambler to build. Remember the more original the more money it will be worth however that value may also prevent your from doing what you want with the jeep as opposed to one that is "less than original."

Knowing what I know now, since mine ran...I would focus on the drivetrain/chassis and get the suspension, axles, gears, driveshafts, xfer case, trans, engine in well-built reliable shape first. If you do this with your end state in mind you will have a good running, strong Jeep to enjoy. Then you can focus on the rest in time(ie...Wiring, body work, bumpers, electronics, etc).

Doing the peace-meal style may help you avoid having a completely torn apart vehicle when you are tasked to deploy and your family is left to deal with it.

Here's my build for your reference: https://www.cj-8.com/forum/showthread.php?37292-The-quot-Once-in-a-while-quot-1983-Scrambler-Laredo-Build&highlight=53D+Scrambler
 
Welcome and thank you for your service.

What to look for really is going to vary depending on your price range. If you're comfortable sharing a ballpark number, we'd be able to tell you a lot more realistically where you might start looking.

One big thing is to be ready to jump (cash in hand, trailer/truck if needed) if the right one comes along BUT don't just jump at the first one you see if it's not screaming at you that it's the right one. They're not THAT hard to find (again, price range is important) so you can't let buyer's excitement end up giving you buyer's remorse.

Great news is that you found the right place and we WILL make sure you end up with a great rig if you let the awesome folks on here help :cheers:
 
Welcome and thank you for your service. :usflag:

My .02...
First you need to decide if you want a driver or a project. Each has it's own set of "guidelines".

If you don't mind a project, try to only buy what you are going to use. If an engine swap is on your agenda, finding one with a blown engine for cheaper is a bonus. planning on repainting? Don't pay extra for nice paint. And so on... Often you can get a nice 50-75% finished project for cheap because the owner lost motivation or funding. Likewise, learn from this and don't let this become you..,.

The exact opposite applies for a driver- the more stuff that works without replacement, the better. You can upgrade incrementally while enjoying your ride.

And...if you want a restoration, get as complete a vehicle as possible.

But, I'd try to avoid rust as much as possible. Mechanical repairs can be a DIY item, or at worst affordable at your local mechanic. But body work is just downright expensive unless you feel comfortable doing it yourself. And rust is like Elvis- it seems to keep showing up everywhere and in the most unexpected places. I'd gladly take a good frame and body over a rust bucket that was complete any day.
 
Back
Top