• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

OT: CJ7 Build (Clays')

CHIEFWAHO

Former SOA VP
Lifetime Member
SOA Member
SOA Board Member
City
Thayer
State
KS
My buddy Clay that helps out on our builds and some of you met him at last years National is starting a mild trail rig build on a CJ7. I know, I tried and tried to get him in a Scrambler but for some reason just couldn't get him to do it.

ry3D400-76.jpg


ry3D400-77.jpg


ry3D400-78.jpg


ry3D400-74.jpg


ry3D400-79.jpg


ry3D400-80.jpg


ry3D400-81.jpg


Frame is super solid other than the 2 body mounts infront of rear tires and the rear cross member. It was going to get a new cross member anyway. We are designing one for a YJ tub swap! It will get frame plates as well.
ry3D400-82.jpg


ry3D400-75.jpg
 
Sweet, another nice build thread from y'all :thumbsup:

Neat idea on the tub swap crossmember, I always thought the tubs were a direct swap...
 
Couldn't get him into a Scrambler because the Adams have cornered the market on any and all Scramblers within a 500 mile radius....

Why a tub swap? That one looks like it is in great shape. I wish the tub on the CJ7 i have looked that good.

Truck
 
CHIEFWAHO said:
My buddy Clay that helps out on our builds and some of you met him at last years National is starting a mild trail rig build on a CJ7. I know, I tried and tried to get him in a Scrambler but for some reason just couldn't get him to do it.



ry3D400-74.jpg



ry3D400-75.jpg






what happen to the heater box and firewall in the pic's above??
 
Last edited:
Just as well stretch it while the body is off. Maybe around 10 inches or there abouts.:rolleyes:
 
Kaiser8 said:
Nice color.:D
I don't know why but I can't talk him into going back with that color.?

bigwalton said:
Neat idea on the tub swap crossmember, I always thought the tubs were a direct swap...
If our research is correct the body mounts in front of the rear wheels have to be modified, that is fine because we have to remove those 2 for the frame plates anyway.
 
Last edited:
Truck said:
Couldn't get him into a Scrambler because the Adams have cornered the market

Why a tub swap?

I offered to sell one from our herd!

Looks are deceiving, the tub is repairable but would take alot of work.

7jeeps7kings said:
what happen to the heater box and firewall in the pic's above??

I think they hacked it and the heater box up to replace a soft plug. WHY????????
 
more pic's and progress
ry3D400-61.jpg


ry3D400-62.jpg


ry3D400-63.jpg


ry3D400-64.jpg


Frame Plates painted with weldable primer.
ry3D400-65.jpg


Frame prep for plates
ry3D400-66.jpg


this mount has to be moved for the plates and the YJ tub.
ry3D400-67.jpg


ry3D400-68.jpg


ry3D400-69.jpg


Extra length cut off rear plate.
ry3D400-70.jpg
 
we sqaure cut it so it will tie right into the new rear cross member.
ry3D400-54.jpg


ry3D400-55.jpg


ry3D400-56.jpg


ry3D400-57.jpg


ry3D400-58.jpg


ry3D400-59.jpg


ry3D400-60.jpg
 
Plating Process nearly completed this weekend.
ry3D400-19.jpg


ry3D400-20.jpg


ry3D400-21.jpg


ry3D400-22.jpg


Inside middle frame plates.
These overlap the outer plates.
ry3D400-23.jpg


ry3D400-24.jpg


ry3D400-25.jpg


ry3D400-26.jpg
 
Patching couple of the frame body mounts
ry3D400-3.jpg


ry3D400-4.jpg


Trial fit the YJ/CJ rear crossmember.
It's CJ rear crossmember with YJ body mount locations to accommodate the YJ tub thats going on.
ry3D400-5.jpg


ry3D400-6.jpg


ry3D400-7.jpg
 
Weld Through Primer.

It will keep the steel from rusting in between the two sheets once they are stitch welded together.


Carl
 
What was that you put on the frame to prep it for welding and why?
It is a weldable primer another buddy gets from his work.
I don't even know the name of the stuff.
We try to coat the metal where it will be back to back to try and keep the rust monster away.
 
Last edited:
I had a CJ rear cross member with the YJ body mount locations laser cut and bent from 3/16" thk plate.
Haven't bolted it to the tub up yet but we did get it welded to the frame.
ry3D400-34.jpg


ry3D400-35.jpg


ry3D400-36.jpg


ry3D400-37.jpg


Had to notch for the spring hanger or we could have used a spacer.
ry3D400-38.jpg


ry3D400-39.jpg


ry3D400-40.jpg


ry3D400-41.jpg
 
you boys should just go into the frame business and get it over with. I don't know who is doing your metal work but with your drafting ability and whomever cutting out those pieces , I'd think you guys could build a perfect frame with much stronger material and be able to market them pretty well.
 
We are trying to get back in the Jeep building groove.
Clay cleaned the frame up with wire brush and grinder.
Then I painted it with 2 coats of weldable primer (DEOXALUMINTIE).

The frame underneath is a Scrambler frame we are working on as well.

ry3D400-16.jpg
 
Back
Top