• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Poison Spyder Group Buy!

bigwalton

Alaskan Postal nutjob
FORUM MANAGER
SOA Member
City
Dexter
State
MI
Ok folks, despite some people's experiences when trying to organize group buys and since I'm a glutton for punishment, I want to try to pull together a group buy on Poison Spyder Customs body armor.

I've already gotten together solid orders, ready to be placed, for three sets of both Crusher Corners and Rocker Knockers.

I have not yet gotten in touch with PSC on this, I wanted to have a little more information before I went to them. I know there was a thread on the Crusher Corners, so anyone that's decided that these are for them please let me know. I do not know what kind of deal we can make on this or what the implications are for shipping. The orders that we have thus far are all here in NC.

As I said, the orders we have lined up already are solid and ready to be placed. I am not interested in waiting around for weeks for people to figure this out, but speak up if you want to get in on this and would be ready to order. Once I have any other solid orders, I'll get the official deal from PSC on what they can do for us.

Check out the PSC web site for details on the Rocker Knockers and Crusher Corners. There's also the cool Crusher Flares that you can add to the Corners to replace plastic flares on the rear... real sweet!

So speak up if this is something you want in on and we'll see what we can come up with. :D
 
Would this stuff all be shipped to one place, or would my stuff be shipped to me? This might be a "newb" question, but I have never participated in a group buy before. I'd be interested in:

1) Rocker Knockers for CJ-8 (standard; no slider bar w/hardware for fiberglass tub {longer bolts})

2) A set of custom Rocker Knockers for my CJ-10a tub. I'd want them to wrap around the back of the tub, with the same bend that the crusher corners use. I'm not sure if they'd even be willing to do this, though. If not, I'd be interested in just a flat piece of 3/16" with the corner bend, and I could weld another plate underneath and fab something.

Let me know what you find out.

Craig
 
This is interesting. I just e-mailed them about their crusher corners a week ago. I guess we are all thinking as one. I am interested in the crusher corners. I would prefer they not come all the way up to the door opening, but I do have a sawzall so who cares... Walt, it doesn't look like the smaller corners are for Scramblers only YJ/TJ. Let us know what you are able to work out. I have done group buys before, and you usually can get dealer pricing and have everything dropshipped to the buyers. The catch is one person usually has to pay for everything. A bonus is that once you make a dealer purchase, then you usually can make more at the same price. This was true for me on the Howell TBI kits. I bought six, and then had dealer pricing on single kits for a short period. I'll be watching.

Later,
 
1x1_Speed_Craig said:
Would this stuff all be shipped to one place, or would my stuff be shipped to me? This might be a "newb" question, but I have never participated in a group buy before.

I have to work this out after I see who's really interested. I've seen these work both ways. If we just have a large number of orders that need to go all over, they might cut us a deal on the parts and let each person work their own shipping. If you can gang up with others in your area, that always helps cut freight regardless.

1x1_Speed_Craig said:
1) Rocker Knockers for CJ-8 (standard; no slider bar w/hardware for fiberglass tub {longer bolts})

This is good detail, thanks Craig.

1x1_Speed_Craig said:
2) A set of custom Rocker Knockers for my CJ-10a tub...

I don't know about this, it may be a little too custom for them to work into a group thing, but it does't hurt to try!
 
tom82cj8 said:
This is interesting. I just e-mailed them about their crusher corners a week ago.

Did you hear back from them? Sure seems like it'd be dang simple for them to hack them off and clean it up for you and keep the (pricey) steel for something else.

Would you mind listing out the options you want? Do you want the standard LED versions just chopped at the top of the wheelwell?
 
Not to ruin your post. Have you looked at Off Your Rocker corners? They don't go as far up the side. You can get smooth or diamond plate, powder coated or unpainted. There cheaper than poison's. I will have a set in next week I'll post up a picture of them.
 
I have looked around quite a bit. I personally like that they go that far up the side (covers more rust :D) and I'm sold on the fact that these rockers tie into the body mounts rather than bolting through the bottom of the tub. I just see the strength of going that way as such an added benefit that they're worth it.

Also, I want the nice integration between the Corners and the Rockers, any other rockers that aren't the same shape will leave a gap at the joint. This group buy isn't just for the corners!

Hopefully, the group buy will help offset the additional cost some too! :D
 
Last edited:
bigwalton said:
...and I'm sold on the fact that these rockers tie into the body mounts rather than bolting through the bottom of the tub. I just see the strength of going that way as such an added benefit that they're worth it.

That's EXACTLY why I'm getting them (for my 4WD Hardware fiberglass tub), although I'm sure other manufacturers offer similar products. I'm looking for way to tie the front of my rollbar into the frame. This will do it indirectly. Rollbar bolted through tub, bracket underneath sandwiching tub & bolting to the PSC Rocker Knocker, which is attached to the body mount. I may also tie the seatbelts into the Rocker Knocker...I'll have to look more into it.

Craig
 
1x1_Speed_Craig said:
I may also tie the seatbelts into the Rocker Knocker...

That's a genius idea I hadn't thought of! I'll definitely be looking into that with you.
 
Even though I don't have a tub yet I would be interested in this buy based on the price you can negotiate.

It looks to be about $670 for what I would want retail (standard crusher corners for CJ8 and Rocker Knockers with slider bar/step). So I guess it just depends on how much off that price it could be. If it's only 20 - 50 bucks then probably not. It it's in the 100+ range then quite possibly.

Anyway, let me know.
 
I'm another 'depneds on the price'. Best deal I've found so far is on Pirate...Northridge 4x4 is basically giving free shipping...the price on PSC's web site is what you pay. I already have the corners but want/need the rockers (w/tube) and have been considering the rear flares and the tube fenders with flares.
 
Do you only want orders for Scrambler stuff? I am not really interested in buying anything but can pass this on to the 2 local clubs that I'm involved with. Most of the Jeeps in the clubs are TJ's and YJ's ( :eek: ) with the occasional CJ thrown in there. Let me know and I'll post it on the websites.
 
I actually don't want to get involved in anything outside of this board. No offense to you or your local clubs, but it's easier to keep a handle on it if we keep it to one group/board.

Group buys are often complex enough to coordinate without dealing with people that I don't know.

For now, at least. let's see what we can come up with here. One of the sets that I've got already is for Kate's LJ, so I wasn't planning on it all being Scrambler junk, if anyone here has other Jeeps they want stuff for, speak up! Besides, there's too many options that people will all want different on just the Scrambler stuff... it won't all be identical anyhow.
 
Check 4x4groupbuy.com.

They have the crusher corners for $299($331 @ Spyder) and the Rocker Knockers for $240($265 @ Spyder). A savings of $57. If you want the steps on the rockers the price is $305($340 @ Spyder). This would save ya $67.

Not bad, and you don't have to go through the hassle of your own group buy. Just a thought . :)
 
2K1TJ said:
Check 4x4groupbuy.com.

How had I never seen that place before??!! What a great site!

Ok, maybe we need to work this a little differently and try a group by from 4x4groupbuy.com! How's THAT for an idea! :D

Let me look into some things here... this could get real interesting!
 
bigwalton said:
How had I never seen that place before??!! What a great site!

Ok, maybe we need to work this a little differently and try a group by from 4x4groupbuy.com! How's THAT for an idea! :D

Let me look into some things here... this could get real interesting!

hmm mike raises an eyebrow

I wasn't prepared to get these yet, although they are on "the list"...
I'll be watching :D I'm interested in what the guy @ 4x4groupbuy says about this
 
GreatCJ8 said:
I wasn't prepared to get these yet, although they are on "the list"...
I'll be watching :D I'm interested in what the guy @ 4x4groupbuy says about this

I'm with Mike..thinking..

Truck
 
Unless 4x4groupbuy is going to cut a special deal, the Northridge deal on POR looks to be better. The Rocker Knockers with tube are $340 + shipping from PSC. Same units are $304 at 4x4GB with a $53 flat rate ship. Northridge sells them for $340 delivered, so that's $17 cheaper.
 
Looks like the special might be over...going to e-mail Northridge4x4 to verify and see if maybe they'd still give us that deal.

-Rodney
 
Back
Top