• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Project Panel Replacement

It is off... and I finally can move on... of all the tear downs I have ever done... this by far has cost me the most time and materials.
For something so rusty, the weld penetration through that rust was pretty remarkable.

cb

20221213_174948_resized.jpg

20221213_174939_resized.jpg

Hopefully the rest runs smooth so I can work on getting the "new" 85 running and then back to the actual project here.
I need more focus apparently.

cb
 
I give you this, you can get some work done up your way! It'll take a few sweepings to get all the rust up off the floor.

Next!...............
 
So I have this correct, this is a thread about a crazy body fab project that's interrupting finishing the truck you should be working on and, in addition to all of these teardowns that interrupt this one you bought another Scrambler project to make nice that will further interrupt this build?

Am I tracking all this correctly?

I think full stop, get back on the truck is in order :D

Edit: all of which was interrupted for a sick shop build, which is done, and ready for you to use to complete the truck.
 
bigwalton said:
So I have this correct, this is a thread about a crazy body fab project that's interrupting finishing the truck you should be working on and, in addition to all of these teardowns that interrupt this one you bought another Scrambler project to make nice that will further interrupt this build?

Am I tracking all this correctly?

I think full stop, get back on the truck is in order :D

Edit: all of which was interrupted for a sick shop build, which is done, and ready for you to use to complete the truck.
Click to expand...
yes, too many irons in the fire...
 
Even though they look rusty, the rear frame rails in this Scrambler are the best I have ever seen around here.

SPOILER ALERT: some will be triggered

20221217_152655_resized.jpg

20221217_152647_resized.jpg

It is all solid metal, just looks not all that great.

cb
 
uh oh... 5.0!

thumbnail_20221227_144006_resized.jpg

LOL!!!

Had to make sure the new Scrambler was legit, so we had to run the VIN before any paperwork.

cb
 
Not much going on these days... post holiday crash... new years resolutions killing me :)

Stacking wood last night and saw this pic opportunity.

20230109_163430_resized.jpg

Went in and continued the tear down

20230109_180927_resized.jpg

None of this had anything to do with the project except to make room.
It has been a struggle to get out there this past week with all that is going on... hopefully things will settle out.

cb

Bonus picture... fire pit... again, nothing to do with this thread, but wanted to try to give me some motivation to get back to it

20221229_165013_resized.jpg

cb
 
Yeah but its sometimes good to have a break from the Jeeps, The Jeep mojo will come back at some point!!!!.
 
You must log in or register to reply here.
Back
Top