93_Fummins
CJ-8 Member
- City
- Edmond
- State
- OK
Up to what year Wrangler do they have the same axle configuration/transfer case output as the CJ?
No "Wranglers" were right hand drop. The YJ, TJ, JK, JL are all left hand drop.

Up to what year Wrangler do they have the same axle configuration/transfer case output as the CJ?
Fair point. I don't really want to change the rig too much given how clean she is. I think keeping the Dana and swapping in a 350/NV4500 makes a lot of sense. Then the diffs can stay as placed, keep the leaf springs and simply change the drive shafts as needed.May not matter... if you are buying new axles and driveline just get it all to work together. The suspension maybe a factor. If you stay with leaf springs, and a TJ axle size then you will need East Coast Gear to configure for leafs with the axle drop you need.
If you want JK wheels, I’ve got 5 of these new in the box to sell. PM me if you’re interested. I have nothing that they fit on...Building a CJ8 with TDK frame and Teraflex coil springs with East Coast Gear axles that have JK brakes and hubs cut to TJ width, lockers and 4:10. Hemi 5.7 and 545RFE with 4:1 transfer case. It also changes front axle drop. I also have to run JK wheels, lots of 17” takeoffs. The wheel in photo is not final wheel. Trust this helpsView attachment 71701View attachment 71702View attachment 71703View attachment 71704
If you have/had a combination that you were happy with, you may be able to play with gear, tire size, trans, etc. combinations to get somewhat of an idea of gearing.
http://www.grimmjeeper.com/gears.html

That looks nice. I'm going 3.73, 60.5". I've got the 302 and one day will go either 350 Chevy or 2.8 Cummins- either way it'll need a bit lower rpm. I'd love to whack the 4 litre in as I'm an inline 6 fan but easiest route given I bought my scrambler with the Ford boat anchor is to work around it.I just swapped a 4.0 in (wants to live at higher RPM than the 258) with AX-15 (no granny gear, but not tall either) and am running 295/75/17 tires (34s). I bumped from 373 (when I had 32s) and now 456. I love the change; it's better geared now. The tire sized dictated wheel spacers...which is what has me long term looking at 60 or 61 inch wide axles (which would be the same without the spacers)..View attachment 71779
None. The Wranglers have always been driver side front output vs the CJ passenger side output.Up to what year Wrangler do they have the same axle configuration/transfer case output as the CJ?
quick question :the axel builders just called me. I have the throttle down customs steering Box heavy duty bracket. wondering if I need to get the more bracket to move the steering Box forward one inch. I hate to do it given I just put my new steering Box on and the new heavy duty bracket but is this necessary?
I have the high steer conversion on the new Dana 44 front axle and he reckons that with the high steer I may not have a problem. but I am moving the axle forward 1". what would you guys do?
The MORE box is only $105 but i just put the TDK mount on.....
The TDK Coils have some adjustments with adjustable control arms, is this what you are thinking on push a inch forward, what is goal? On steering it is Hard to say without all the parts in one spot. I would try as is first...