• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Random Post Thread (aka: increase your post count here!)

Status
Not open for further replies.
MrBeep said:
Those springs look mighty stiff. Will they ride OK? :wave:
Click to expand...

It is a Rubicon Express 4.5" kit... going on the CJ-7 I wheel as the rear springs on the cheap lift I have in that have sagged terribly and now I am rubbing in the rear with the 35's.
Basically from what I have read it is a great kit. A lot of people run them. I have this same set on the Scrambler that I am building, just have never actually driven it.
I have a set of 4.56 axles, locked and ready to go as well, so the swap will consist of new lift and axles in one shot, flipped tie rods int he front and new 6 bolt outer hubs.
Just making things a little higher, more reliable hopefully, slightly tougher, and more capable for the off road rides.

That said, it will be a winter project at this point... finishing up the RHD Jeep first and then doing something with the new Scrambler project/roller next... that will take some time.

cb
cb
 
That reference was just for you CB. I know you well enough to bust your stones! Now back to the Random Photos.....
 
480e121665535987036043dafbfe794f-1.jpg



 
e6b925fe0eebb48e204a71667543441a-1.jpg

This is how ford routes a brake line on the mustang. 30k miles and look how much its worn on the sleeve that supposed to protect it..

Sent from my SM-N910P
 
Lookin good. It should fit a tall jeep [emoji6]

Sent from my SM-G900V
 
Status
Not open for further replies.
Back
Top