I believe this has been asked but I've searched and couldn't find it.
During my restore/build I'm going to have my tub sprayed, tailgate to firewall. I was going to clean/primer the tub area and the bulkhead and have it "sealed" into the tub (install and spray over), permanently leaving the bulkhead as part of the tub.
Now there's a wife and the possibility of youngans one day climbing into the back of dad's old Scrambler from the front so the bulkhead will need to be sprayed separately then installed so I can later remove it. Hopefully one fine day it will get a full soft top (or maybe even hard) so the bulkhead will need to be removed to allow access.
Anyone had any luck spraying their bulkhead separately from the tub and still have it fit okay? How did you seal it from letting in water? Later removing the bulkhead a nightmare? How has it worked out overall? Thoughts, ideas, preferably experience?
During my restore/build I'm going to have my tub sprayed, tailgate to firewall. I was going to clean/primer the tub area and the bulkhead and have it "sealed" into the tub (install and spray over), permanently leaving the bulkhead as part of the tub.
Now there's a wife and the possibility of youngans one day climbing into the back of dad's old Scrambler from the front so the bulkhead will need to be sprayed separately then installed so I can later remove it. Hopefully one fine day it will get a full soft top (or maybe even hard) so the bulkhead will need to be removed to allow access.
Anyone had any luck spraying their bulkhead separately from the tub and still have it fit okay? How did you seal it from letting in water? Later removing the bulkhead a nightmare? How has it worked out overall? Thoughts, ideas, preferably experience?

I thought Dennis Collins was crazy when he asked for some original ones from me in his attempt to have it reproduced. I had a small stack of them to give. I guess it's ok for show Jeeps but you won't find one in any of my Scramblers...
Wish we had more people in the world like this.
I just hate rust and know how hard it is to find good bulkheads and once a bulkhead is lined, there is no going back (within reason).
, but BEWARE of spray on liners, especially if you plan on keeping the Scrambler for a long time. I would rather see the rust coming, versus stepping on the bed floor one day and falling through