scott anderson
Old age Mutant Ninjaneer
- City
- Paragould
- State
- ar
I thought we needed a thread on the great tips that we have learned over the years. I have been reading a lot of posts of several boards about pilot bushing removal. So here is tip #1
To remove a stuck pilot bushing; 1st drill out the bushing with 9/16 drill. Then tap the hole with 5/8-12 threads. insert a 5/8 bolt and screw it into the hole till it bottoms on the crank. If it does not come out easy, tighten it tight then hit with BFH, then tighten again and repeat till the bushing turns right out. I have used this method many times and it works. If the bushing is alread worn past 9/16; drill it with an 11/16 drill and tap to 3/4 and use the same process.
To remove a stuck pilot bushing; 1st drill out the bushing with 9/16 drill. Then tap the hole with 5/8-12 threads. insert a 5/8 bolt and screw it into the hole till it bottoms on the crank. If it does not come out easy, tighten it tight then hit with BFH, then tighten again and repeat till the bushing turns right out. I have used this method many times and it works. If the bushing is alread worn past 9/16; drill it with an 11/16 drill and tap to 3/4 and use the same process.


).