• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

TJScrambler - Getting Started

Jeep karma has a funny way sometimes. I have missed out on a few things lately and was feeling down and then 2 Sundays ago, I am making breakfast for the little ones, check Craigslist quick and see a 1983 Scrambler for sale... it had been posted for 37 minutes and it was literally 30 minutes away from me in a barn. It hadn't seen the light of day for the last 12 years and the price was right.

So, I emailed, he called me back and I headed out to see it.
I wasn't comfortable with what he was asking as I really only wanted the body and where it was located, it was tough to see anything... he had a drop light, but I couldn't see the far rear end of it as it was tucked in a corner and the tires were flat, so moving it wasn't much of an option. He said he would come down a little, I told him I was going to pass as I was sure someone would give him the money he was asking for and I really didn't need the whole thing. He then asked what I would offer, I told him, we shook hands and I left $500 with him to hold it until he following weekend.

Through the mouse crap and cobwebs though, I saw something that you don't see in NH all the often. I saw a 30 year old Jeep Scrambler that had been painted at one point, which looks like TJ greenish/blue from 1997 I think if my memory serves me, and there were no gaping holes. The frame looked very nice and the underside wasn't rotted.

It has a 1984 Chevy 350 swapped in, 350 bolt in motor mounts from Advance I think, Chevy bell housing, T4 from what I can tell, and a Dana 300. I think the first trip out the T4 would have been its last, but it never got that far. AMC 20, Dana 30 and probably stock, haven't gotten that far. It has a full nutmeg Kay line soft top and doors, full hard doors, and a dash pad that has been covered in leather. It has a bulkhead too, and it looks very nice as well. Tilt column, p/s pump is there in a bucket, fenders are decent, hood is nice, windhshield frame has no rust, and more I am probably forgetting.

Here are the pictures of it: I am still deciding on what to do, but I know the 350 is out as is the soft top, so those will go up for sale shortly, once I get them out and "on" in case of the top, I want to make sure all the pieces and parts are there.

http://certifiablejeep.com/TJScrambler/tabscrambler1983.php

Been a long weekend fighting a stomach bug with the family, so more work is to come.

Craig
 
been working at it all day... found a leather wrapped dash and a Kayline rear bumper in the mix... there is so much dust and mouse crap! I will post some pics up shortly... there is a lot to identify... also, washed the hood, fenders and frille shiell and the soft top, also kayline. It REEKED of mouse piss... not a pleasant day, however, I was off work and it was 60 degrees, so that was cool.

cb
 
been working at it all day... found a leather wrapped dash and a Kayline rear bumper in the mix... there is so much dust and mouse crap! I will post some pics up shortly... there is a lot to identify... also, washed the hood, fenders and frille shiell and the soft top, also kayline. It REEKED of mouse piss... not a pleasant day, however, I was off work and it was 60 degrees, so that was cool.

cb

So whats with the other tub and frame you had then? Building 2 now? :D
 
Funny that you bring that up. I am having some thoughts of whether this should be put back together and sold off... for some reason the thought of keeping it all original as it was in 1996 is appealing, however, there are a lot of parts missing from the original mix... seats and risers are long gone as is the 1/2 hard top, the rug/carpet isn't there anymore as is the motor.

So, on the one hand, I bought it for the tub, I have a friend that needs a frame and then the rest I can use or sell off, and on the other hand... I could have 2 of them... one for each kid. The issue then is where to get another body... they just don't pop up in this kind of shape very often. I have been looking pretty diligently for a couple years now for one and all the ones I have seen are too far gone.

Decisions, Decisions, Decisions...

cb
 
Got another page put up on the project.

http://www.certifiablejeep.com/TJScrambler/tabscrambler8.php

I am stripping the other rig down and keeping what I will need and selling off the rest... I will basically put together a whole Scrambler project, minus a body for sale.

I really bought the second one for the body, and got a few odds and ends out of it.

So, I have to work on that, but first I have to head South for my grandfather's service next week. I hope to get some work done on it after all of this settles out.

He was curious about it up until the end. He was very happy that I would have a Daddy daughter project to work on with my first born.

The second born will also have one, but I haven't decided on LJ with a CJ nose and other goodies, or CJ6 with a CJ8 underbelly... decisions decisions.

cb
 
Not a ton done on the Scrambler project, but I did order up some parts in order to fix the few areas on the frame that need attention.

The good news is that I was able to get the locker in place in the CJ7... been waiting to do that for a LONG time. Now I just have to button it all back up. It was good practice for when I do the one in the Scrambler, but first I have to get new gears in it!

http://certifiablejeep.com/images/freejeep/page72/large/IMG_3704.jpg

cb
 
OK... it was a big weekend for me. I think I am mostly done with the yardwork, housework, kidwork, Christmas work, etc. so I can start on the Scrambler build.

Yesterday I spent a while getting things organized and getting the old out and the new in... I am very happy that I still remember how to do this stuff ;)

So, I cleaned up a lot, I traded parts, I sold parts, I have more going out today and this week and hopefully next weekend we can get back to repairs, fixes, tweaks and getting the mock up phase moving along.

Here is a page that details how the last 6 months have gone.

http://certifiablejeep.com/TJScrambler/tabscrambler10.php

Thanks,
Craig
 
One of the most satisfying days I have had in a long time.

I flipped the body on its side, and the attacked the body mount, seat belt mount, and finally the roll bar mount bolts and got a whole lot of them out.

IMG_4346.jpg

IMG_4341.jpg

I truly believe in New England we have Torx bolt's ugly meaner cousin in place of the normal West or South torx bolts. I finally started cutting off the bottoms of the bolts and then super heating them red hot from both sides, whackig it with a hammer and tghen slowly backing them off until resistance. I then went back in, sprayed WD40, worked it, sometimes more heat, and then repeat.

I hope to get more of the other 8 bolts out today, but the daylight looks really nice!!!

IMG_4347.jpg

I have put nice new grade 8 bolts in there to hold it in place while I do the others since it is on it side and it is lubed up with plenty of anti-seize after I tapped the holes... oh yeah, taking NO chances whatsoever on this one!

cb
 
sprayed WD4

Good deal, but do yourself a favor and get some PB Blaster or Kroil this morning, works so much better than WD40 imy experience, PB is my weapon of choice. It made to do this and not just a general lubricant. I bet soaking things in that overnight would have many of then coming out with channel locks. :thumbsup:
 
I had soaked it in PB probably 8-10 times over the last couple months, to no avail.
PBBlaster and heat really make you sick as well, look it up... WD is not as bad, but either way you need a respirator and a well ventilated area or you will get a headache like you have never had before and want to throw up... dizzy for hours... no good.

These were so rusted in there, no penetrant besides heat would get them out, it is just the way it is sometimes... it took a few hours to do all that and I have a few more, especially on the torx bolts and remaining seat belt bolts... the damn torx ... the damn torx.

cb
 
Are you planning on reusing the bolts? Why not just use the grade 8 bolts you have in there now?
 
Maybe I didn't explain it correctly.
There are 8 torx bolts left in there and now 4 grade 8 ones to replace the 4 I removed to hold it in place.
Those are the only grade 8 bolts in the whole thing at the moment.
When I flip it back down I want the rollbar still on there so I can pick it up by it to put it back on the frame.
So, I put in temporary grade 8 bolts to accomplish this.

I will not reuse the bolts I am taking out... they are junk and I don't use torx bolts on my rigs, too much of a PITA.
I have a stainless kit and I think they come with bolt mount bolts, but more than likely, with the rockhard cage I have for it in the inside, that will use grade 8 bolts, so I probably will do the whole thing in grade 8... tractor supply is pretty good with the bulk lb. price.

cb
 
Just got in from a whirlwind... literally, wind is blowing like crazy out there... but I did manage to get out all 20 torx bolts and with all the body mount bolts anda couple of the seat belt bolts, I am only looking at 6 more torx bolts to go next weekend and then put this back on the body... to start mapping out what floor panels have to be replaced... I can't wait.

cb
 
I didn't have a chance to write this all up yet, but I was able to get a lot done this weekend before the new CJ5 comes over to get some work done on it (it is for a friend).

IMG_4383.jpg
IMG_4397.jpg

I got the body back on now that all the bolts are out of the underside... it fits nice with the 401.
I then got the nose on with OEM parts from various donor Jeeps and then I was able to get the driver side Poison Syder rock rail on as well.
It is sitting on 35x12.5x15 Baja Claws on 15x10 Pro Comp White Waggies... I don't think I am keeping the wheels, but it does look pretty stout.

cb
 
Looks good!!! I dig the wheels :thumbsup:

I guess I've been lucky with PB and heat, because I've done a good amount of it and never had any issues in a closed garage without a respirator. First I've ever heard of that. Actually did some just last week working on Mater. I was actually always impressed at the lack of more of a hardcore smell to it. WD 40 didn't touch the stuff where PB has worked for me :shrug:
 
Back
Top