• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

TJScrambler - Getting Started

I have talked to Jeff a few times, that is how I found the hood, as he got the front grille from the same guy and I ended up getting the hood.

I want to do steel, so no fiberglass... nothing against it, but all my Jeeps are all original steel and wanted to keep the trend going, especially up here in NH, it is mostly unheard of to have steel bodies that aren't rotted away.

I guess I am just overthinking it. I wanted a certain look and in my head it looked different then how it is in real life, but ain't that always the way ;)

cb
 
I am really on board with your idea for the Commando Hood and Grill, but I think I like this. !
9a2abuva-1.jpg



 
I think proportionally it is the way to go... I might just have to find a CJ6 to stick the commando nose on!

cb
 
I prefer the stock hood..
However, I think one of the big problems that is throwing you off is that its not painted the same color. The grill, wings, hood, and fenders would look better if it was all in the same color.
 
Painted or not, it still looks top heavy to me somewhat, whereas the CJ hood seems more proportional... I guess it is what you are used to looking at I guess and when new idea/design comes in, it just doesn't seem "right"

cb
 
I like the commando hood, but I've never been been one to be "normal"
 
Man, a year an a half of other things... had a talk with the little lady today when I was doing the side boards/rails... told her she was next in the queue... just have to finish up the UK Jeep, polishing out the 15x8's for her and the sideboard pieces.

I am hoping to get a lot done this winter on her... we will see.

cb
 
So, she is moved back into the workshop for the winter... I hope to get to her after I finish up the UK Jeep and swap some springs/axles into the Silver Jeep.
There is a lot of body modification that needs to be done as her floors all have to be ripped out.

cb
 
Seems to me you have the same A.D.D. problem Me and Randyzzz has. You Never finish a project before you start new ones.
Don't worry, it gets worse.
 
Yeah, I have another one behind this one as well and it has been 10 years in the making for that... I can't say no I suppose.
The good news is that for the first time this winter, I will have the whole shop available instead of parking in there and having to move things, etc.
I will get the UK one done as much as I can and stick her in cold storage for the winter... move in other Jeeps that need small jobs done and then work solely on this one.

cb
 
Seems to me you have the same A.D.D. problem Me and Randyzzz has. You Never finish a project before you start new ones.
Don't worry, it gets worse.

Not Me! :rotfl:
 
I am too... once the weather turns cold, I will put the UK Jeep away for the winter and then be able to separate the body/chassis and get to work... thinking rotisserie and a lot of bracing for the extensive amount of work that is going to be done.

Eventually the full floor is coming out and being replaced, along with the 4 small corner pieces as well... one wheel well, and the rear cross support, along with the 2 front toe boards... it is quite an undertaking, but in the end will be worth it.

cb
 
I am too... once the weather turns cold, I will put the UK Jeep away for the winter and then be able to separate the body/chassis and get to work... thinking rotisserie and a lot of bracing for the extensive amount of work that is going to be done.

Eventually the full floor is coming out and being replaced, along with the 4 small corner pieces as well... one wheel well, and the rear cross support, along with the 2 front toe boards... it is quite an undertaking, but in the end will be worth it.

cb

Would it be just as cheap to buy a new tub, I know it would be easier.
 
A new tub is 5000-6000 and is aftermarket and I have just seen/heard too many complaints about it.

I have about $500 into the tub as it sits.
New floors, new bed floors, new parts pieces will be probably $1500 and then the time.

So, it is cheaper to do it this way, but definitely not easier or less time consuming.

But, I am doing it and I will know it is done right and allows me to get weld thru primer in between all the panels and rust preventative measures... so I am happy about that.

cb
 
Back
Top