• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Trail Scrambler Build/Rebuild-Chiefwaho

Jason, your an insperation to us all! Keep up the great work. Looking forwarsd to seeing it in Clayton!:D
 
Looking forward to seeing it monday when we drop the raffle scrambler off at your place!
 
Fuel tank mounted and hooked up!
47b8da06b3127ccea85f19dbd7c500000016101AaMmTRm4cMY


Drive shafts (thanks Mike at 4x4Land)
rear
47b8da06b3127ccea85f204397d900000016101AaMmTRm4cMY


front
47b8da06b3127ccea85f11f1d7eb00000015101AaMmTRm4cMY

Not pictured is the long travel spare shaft that can be used for the front or rear.

mounting plates for frame tie-in on the half cage and stock roll bar.
47b8da06b3127ccea85f1ed7166200000016101AaMmTRm4cMY


47b8da06b3127ccea85f1015979700000016101AaMmTRm4cMY


a buddy came by with his bender and we started the half cage.
47b8da06b3127ccea85f161f16ae00000016101AaMmTRm4cMY


47b8da06b3127ccea85f28e5977b00000016101AaMmTRm4cMY


47b8da06b3127ccea85f2e95163800000015101AaMmTRm4cMY


47b8da06b3127ccea85f2304d70700000016101AaMmTRm4cMY
 
47b8da06b3127ccea85f247f97e700000016101AaMmTRm4cMY


47b8da06b3127ccea85f3358d75300000016101AaMmTRm4cMY


47b8da06b3127ccea85f33fcd7f700000016101AaMmTRm4cMY


47b8da06b3127ccea85f316a565000000016101AaMmTRm4cMY


47b8da06b3127ccea85f366516c400000016101AaMmTRm4cMY


47b8da06b3127ccea85f3748d74100000015101AaMmTRm4cMY


47b8da06b3127ccea85f49abd79d00000016101AaMmTRm4cMY


Still need to add some oh ****! bars here and there, maybe a CB mount up above. Still need to get my down bars to the frame and add tabs for the 5 point harness's.
 
That hole in the floor for tcase cooling? ;)

Looks killer.
 
Doing Good!

Jason, Keep up the good work. As you said the other day, little things take a lot of time. It pays off in the long run.
 
It cranked and fired today, but I can't keep it running. More research?

Also having some major issues with the Painless (only in name) wiring harness. Every circuit in the fuse box is hot regardless of key position. Wiper fuse pulled shuts off blower motor. Pulled every fuse and wipers still work. Voltage gauge stays on all the time. I am thinking painless has some major QC issues. And they do not include a wiring schematic. They are getting called first thing Monday morning.
 
It Lives!

MOTOR NOW RUNS!!!!
I was not maintaining 12V while cranking,
found a wire that did and presto it stays running.

As for the painless harness I am not impressed at all. They had a hot wire on the side of the wiper motor fuse and it was back feeding and making the entire fuse block hot. Nice quality control!

 
Awesome work, Jason and friends!

I enjoyed many trips in front of or behind Lee when he owned that rig, and I hope to be able to go on many with you (although I don't know if I'm going to be able to follow that beast!.....maybe if I ever get my big build finished! LOL.)

-Mike
 
exhaust

I have a Gen III chevy engine and was wondering if you could show a couple pictures of your exhaust and share some specs such as tube size etc.

I'm not especially happy with my current setup and I'm looking for some ideas.

Thanks
Brian
 
Jason, Nice work. What ratio did you go with on your Atlas? I just ordered a 3.8:1. I'll also have a TH400 w/513gears. I kind of stewed over what ratio to go with. Kim
 
Guys I will answer ?'s in time.
Been too busy building (still taking pics as I go).

It finally made it out of the shop for a drive Friday afternoon and it went wheeling Sunday for about 6 hours. Things seemed to work pretty well. I sure like the power of the 5.3L.

Hope this link works

http://smg.photobucket.com/albums/v260/CHIEFWAHO/K-Rocks May 08/
 
Last edited:
Looks Great

Looking good, Jason, i hope i get to wheel with you someday. Maybe Colorado?
 
"As for the painless harness I am not impressed at all. They had a hot wire on the side of the wiper motor fuse and it was back feeding and making the entire fuse block hot. Nice quality control!"

amen! I used one of their harnesses on a simple 4 to 6 swap on my son's first scrambler, not again, doing my own on my cj 5 was far easier
 
It makes me SO happy to see that Scrambler back out on the trails... great stuff! Amazingly fast (re)build man, I'm so jealous.
 
Getting a new transmission, turbo 400 with Reid Racing case and bell housing.

10377522_925795040767510_7441248640416689642_n.jpg
 
Have not updated this for a long while.
I've wheeled an abused this rig for a many years since original build.
This is the best she has looked since that time.
I'm so ready for the National Scramble in South Dakota.

JA Trail Scrambler 6-9-16.jpg
 
Back
Top