• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Update on SOA Charity Project ("one-stop shoping")

Anyone have an "in" at Durabak? I do have a document detailing the project, and explaining the publicity that a potential sponsor would receive.

txsbill - We should be all set for paint and the fenders, but thanks for the offer. :)

Craig
 
welll i got the shocks "in hand"...I will be sending them out to craig in a few days...I also scored one of those remote control kits so the proud new owner can adjust each shock from the cab...this kit comes with a small on board compressor also...
 
scott anderson said:
welll i got the shocks "in hand"...I will be sending them out to craig in a few days...I also scored one of those remote control kits so the proud new owner can adjust each shock from the cab...this kit comes with a small on board compressor also...

This Scrambler is going to ROCK! :D

Another possible parts update...I just bought a '72 Jeepster Commando for cheap. I got it because the '72-73 Commandos had a centered Dana 44 rear axle (narrow-track width) that's a direct bolt-in for a CJ. Gearing is 3.73. I figured we could get some wheel spacers donated from someone, and find a wide-track Dana 30 w/3.73 gearing for the front. Wha-la...Dana 44-equipped project vehicle. :)

I'll be selling everything else from the Commando to recoup my cost.

Craig
 
Scott - I received the Rancho stuff today (thanks), but haven't even had a chance to open it yet. Thanks again for all your help with this! :)

Craig
 
good...i was glad to get em out of the office....u can covet them for awhile...neat remote unit...i would never buy one..but donated cant be beat
 
scott anderson said:
good...i was glad to get em out of the office....u can covet them for awhile...neat remote unit...i would never buy one..but donated cant be beat

You're one hell of a marketing guy, Scott. :D I'll open the box and check out the stuff this weekend.

Craig
 
if i wasnt a good christian banjo player....i would have just mounted them on my jeep and said that the company declined to donate....and to think i have the cheep *** gas magnums on mine...which i actually think r great...its amazing...i see 55000 shocks made every day....and i rarely ever buy any....where do they all go...???55000 a day....wowow
 
I just e-mailed Hank about making some tweaks to the information on the www.cj-8.org site. We're really close to having all the project info there.

We're also really close on a sponsorship that will get us rebuilt Dana 30 & Dana 44 axles (new bearings/seals & sandblasted/painted housings).

Craig
 
scott anderson said:
Craig...did u ever opent the box to see in the shocks made the trip ok?

Everything looks great (I didn't verify part #s for the 1" lift, though). I'll post pics of the Rancho stuff, along with the M.O.R.E. stuff very soon. :)

Craig
 
Quote:
Originally Posted by CrazySchaefer
99% sure I have a wide track front axle (wheel to wheel). The only catch is someone would have to pick up in KC as I started a new job and chances are I wont make to the Nat. Scram. Ill try to post pic later

If CrazySchaefer's offer still stands and his FRONT WIDE TRAC AXLE is needed for the SOA charity project. I would be able to hual it to Hot Springs, but I would need to make arrangements with CrazySchaefer for my brother to meet with him in the KC/Leavenworth area THIS WEEK so he could hual the axle back to me in Thayer. (he has access to a truck THIS WEEK ONLY)
 
i am switching to 8 lug wheels with dana 60 conversion...so i can donate my simulated beadlock 15X10's that are on my rig now...the only catch ..it may be 6 months before i make the switch...they are black powercoat..and like new...let me know
 
Craig,
Couple more things to offer.
I've got a set (4) of white, steel wagon wheels with some pretty shot tires on them. The bolt pattern is 5 on 5.5. They would be great for rollers, no need to worry about overspray, grinder dust, etc. The wheels would take too much to clean up to be worth it. I can bring them to HS if you want them.
Also, I still have that hood I told you about. I noticed on the project list that someone else offered a slightly creased one up. I think the one I have is about the same.
I'll shoot some pics to show you what I've got.
Let me know if any of this looks good to you.

Mike
 
I'd like to give a HUGE thanks to Jared (JaredsJeepin) at Five Star Auto for sponsoring our project. It's great to see some involvement from local Michigan Jeepers!


Five Star has hooked us up with the following:
  • Donated wide-track CJ Dana 30 front axle w/3.73 gearing
  • 1 set Spidertrax wheel spacers (to widen the stance of the rear Commando Dana 44 axle we have for the project)
  • Donation of labor to rebuild the Dana 30 front, and Dana 44 rear axles with new bearings & seals
  • Sandblast both axle housings and make 'em pretty :D

Thanks for your support of this great charity project, Jared! :)

We have secured a T-176 & Dana 300, and are currently looking for a good-running 4.0 to install into the Scrambler. I have been discussing a sponsorship with the Advance Adapter folks to try to get the required bellhousing and other parts necessary.

Mike (Kaiser8) - I'll keep your wheels in mind, but I think we may already be set for some rollers. Thanks for the offer.

Craig
 
1x1_Speed_Craig said:
We have secured a T-176 & Dana 300, and are currently looking for a good-running 4.0 to install into the Scrambler. I have been discussing a sponsorship with the Advance Adapter folks to try to get the required bellhousing and other parts necessary.

You shouldn't need a special bellhousing for the t-176. The rule is that if it bolts to a 258, then it will bolt to a 4.0L. AA has a CPS relocation kit that works slick for the 4.0L swap and maybe they could donate that (moves the CPS to the front of the engine and it reads off of special harmonic balancer). I'm not sure if AA sells a bellhousing for the t-176 that has provisions for the CPS.

The other option would be to see if Novak (another adapter company) could machine the existing t-176 bellhousing to accept the CPS - this is how it is done from the factory for the 4.0L (CPS reads off of the flywheel). They only charge about $75 to do this plus shipping. Maybe we could pay for the shipping ($40 round trip) and have them donate the labor.

Whatever you do, you have to match the flywheel with the starter regardless of which CPS option you use. 4.0L flywheel with 4.0L starter or 258 flywheel with 258 starter.

When the time comes I can help with the wiring for the 4.0L swap. It is very easy to use donor harness and splice into the CJ harness. I would NOT recommend using the limited budget to buy a $400 harness from HESCO.
 
First of all, for anyone bringing parts for the charity project to Hot Springs (National Scramble), please meet up with Lee Smith (FELNTPSY). He'll be gathering up the parts and toting them back with him.


Also, it's now official...

My contact at Advance Adapters just informed me that they would be sponsoring our charity project with a 4.0-to-T-176 bellhousing! This Scrambler is only getting better & better. :)

Craig
 
Just Checking............

Craig, you still want us to bring parts for the SOA Scrambler to Hot Springs...right? Just checking so these things don't just make a round trip with me. Seats and console from me...
 
John N said:
Craig, you still want us to bring parts for the SOA Scrambler to Hot Springs...right? Just checking so these things don't just make a round trip with me. Seats and console from me...

1x1_Speed_Craig said:
First of all, for anyone bringing parts for the charity project to Hot Springs (National Scramble), please meet up with Lee Smith (FELNTPSY). He'll be gathering up the parts and toting them back with him.

Yes please. :) Much apprecaiated, John (and others).

Craig
 
Back
Top