• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Update on SOA Charity Project ("one-stop shoping")

beat ya too it

More later, but a little teaser

Squint real hard, and you can see that $50 crate that they built and charged us for :eek:

DSC00435.JPG
 
A-l-l-r-i-g-h-t-!

It's REALLY GREAT to see these photos Matt!!!!!!!!!!! These frames are the Mutt's!

"We're doing it!!" :D

Craig I am also making good progress with my little part in this endeavor! For details see your PM.

Cheers!
 
**UPDATE 3/7/2005**

It looks like we'll be getting some local Michigan sponsorship from Jared & Five Star Auto (www.fivestarauto.com)! The details still need to be worked out, but I just wanted to thank Jared for his generousity in helping with this great project.

Thanks!

Craig Emenaker
Project Manager - "S.O.A. Great 8 Restoration Charity Project"


P.S. - Scott, that's Carl Rogers' SRS frame.
 
scott anderson said:
who does the spring reversed one belong to?? just curious

That would be mine. That was the whole reason for me going down to Matt's to get the frame. Originally he and I were putting together the group buy to get the frames. Did no thave enough takersso we bought one extra. Then Craig had the AFW/SOA idea. It was about the same time so we just had them shipped together.

Looks like I will be cutting the extra length off of the AFW frame to fit the aluminum tub that I scored. Now I just need to get it here.

Carl
 
AFW, has an employe who built his own bobbed scrambler. I guess that he could not really get the set up to work like he wanted.

It is a full width axel set up with a YJ type frame with coli spring rear. The body was a jp-off road special and he had created a roll cage to fit it. They made an offer to Matt and he told me about it after I got a fiberglass body that I was going to use. I had told Matt that I really want a aluminum tub but for the time being the price on the fiberglass was right. He told me about the AFW set up and he knew someone who wanted a glass tub.

I talked with Johnatan at AFW and we set up a deal and Mr. Beep was good to buy the glass tub. So durring the frame transit ordeal I too the glass to matt to take back with him to Indianna for Toby. Now I just have to get the aluminum tub and cage back here from Montanna. Looks like Chris Durham, a rock racer from SC will bring it back for some $;s for gas on his trip back from easter jeep at Moab. A littl emore than I wanted to spend on shipping, but reasonable seeing what the cost of shipping is doing right now.

So that is the current story. But looks like I should have ordered that scrambler frame in a bobbed version. But hey it is easier to cut than add length.

Carl
 
CBRogers said:
Now I just have to get the aluminum tub and cage back here from Montanna. Looks like Chris Durham, a rock racer from SC will bring it back for some $;s for gas on his trip back from easter jeep at Moab. A littl emore than I wanted to spend on shipping, but reasonable seeing what the cost of shipping is doing right now.

Cheaper than $1600? ;) Congrats on the find, Carl.
 
CBRogers said:
AFW, has an employe who built his own bobbed scrambler. I guess that he could not really get the set up to work like he wanted.

It is a full width axel set up with a YJ type frame with coli spring rear. The body was a jp-off road special and he had created a roll cage to fit it. They made an offer to Matt and he told me about it after I got a fiberglass body that I was going to use. I had told Matt that I really want a aluminum tub but for the time being the price on the fiberglass was right. He told me about the AFW set up and he knew someone who wanted a glass tub.

I talked with Johnatan at AFW and we set up a deal and Mr. Beep was good to buy the glass tub. So durring the frame transit ordeal I too the glass to matt to take back with him to Indianna for Toby. Now I just have to get the aluminum tub and cage back here from Montanna. Looks like Chris Durham, a rock racer from SC will bring it back for some $;s for gas on his trip back from easter jeep at Moab. A littl emore than I wanted to spend on shipping, but reasonable seeing what the cost of shipping is doing right now.

So that is the current story. But looks like I should have ordered that scrambler frame in a bobbed version. But hey it is easier to cut than add length.

Carl
Okay, I'm confused...which part of this hardware mentioned is going onto the Project Scrambler?
 
BritScrambler said:
Okay, I'm confused...which part of this hardware mentioned is going onto the Project Scrambler?

None of it. This thread has officially derailed. :D Back on topic with project discussion only, please. Mom...I mean, Mark...thanks for bringing this to our attention. ;)

Craig
 
submit nominations for charities?? I was thinking this would be a good one for the Children of our fallen soldiers abroad. It is all American for Children of Fallen American Hero's.

What do you all think?

TK
 
^
|
|
|

I like Tom's way of thinking. We have got service men from all over the country defending out rights to play in jeeps. I think this is an excellant idea.

Craig- your thoughts????
 
TexasAg77 said:
^
|
|
|

I like Tom's way of thinking. We have got service men from all over the country defending out rights to play in jeeps. I think this is an excellant idea.

Craig- your thoughts????

We're not there yet in terms of planning. I like the idea, though, but would have to verify with the SOA Board and/or an attorney to see if this would be considered an actual charity, as this is how the project has been and will continue to be marketed. Tom, is this just a "general cause", or do you have a URL with more specific info?

As far as this aspect of the project (dividing the U.S. and thinking about charity nominations), I'll be looking for a volunteer to handle this portion of the project. I'll work closely with them, but don't have the bandwidth to do the work myself. Volunteers?

Also Tom, did you get my PM about your soon-to-be T-shirt?

Craig
 
Craig, I did get your e-mail on the T-shirt. I sent a reply back to your e-mail address? If you don't get it I will re-send the message..

On the charity link? Well I was just kind of thinking out loud, but I did a quick search and found this.

http://www.nmfa.org/site/PageServer?pagename=homepage

http://www.taps.org/

I would think some of the retired and active Military members we have on this board would also have a idea or link of any groups that help out the suvivors?

TK
 
btt

Still trying to reach Rubberhook about the bodywork/paint (call me Kurt). We have someone who can get new front fenders/hood inexpensively, and are looking into that. For you others who have volunteered body parts (grill, dash panel, etc.), I'll be in touch shortly about shipping them; hang tight for now.

I will probably have more details regarding the Five Star Auto (www.fivestarauto.com) sponsorship worked out within the next 2-3 weeks. We're also approaching some other big-name companies about additional sponsorships. I'll post follow-ups as we hear back from them.

Despite not hearing much publicly, things are moving along fairly well. :)

Craig
 
Last edited:
Great news...I just talked with Kurt (Rubberhook) about the bodywork/paint, and we're a go. We decided on Olympic White for the color, and will be going with a silver/black decal set from Kyle (kgt0001) & Austin Jeeps. I just PM'd Kyle, as well.

Kurt also said he'd spray Herculiner in the tub and on the firewall/underneath the tub if we can get him some. Anyone know of someone who would like to donate 2 gallons of Herculiner? I'll be checking into this immediately.

I'll also be PM'ing folks about shipping dash panels, windshields, etc. within the next few days. That way, we can get everything painted at once.

Thanks,
Craig
 
Great news and I like the color choice!

Is it too late to switch over to that Postal that you found though??? :D
 
Eric,

If you guarantee to buy a hole bunch( :eek: ) of raffle tickets I bet we could build the project into a Postal :D


edit= buy not "by"
 
How about we contact Dura Back in Denver and see if they will donate 2 gallons of the product. We could arrange to give them a little advertizing out of the thing.

Figure that since the market to the Jeep croud that maybe that woudl be a good idea. They also make colors too.

Carl
 
We decided on Olympic White for the color,
I have nearly a gallon of "Pure white" single stage acrylic enamel left over from a truck I was gonna paint but sold before I got around to it....It's yours if it's needed. I also have a brand new LF fender I can pitch in as well. The fender was a throw in from a trade I did with bg2pres here on the board. I'm not gonna use it, and he obviously wasn't either.

lemme know...

Bill
 
Last edited:
Back
Top