• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Weatherstrip and Door Panel Vendors and Quality?

Rosco1974

Scrambler Junkie
BENEFACTOR
Gold Member
Lifetime Member
City
Oklahoma City
State
OK
I am in the market for a complete weatherstrip/seal kit and door panels for the scrambler and my YJ. There are several manufacturers for the seal kits (Omix, Fairchild, Metro, Crown, and on...) and reviews seem to be all over the place. Door panels seem about the same.

Anyone with experience on vendors, quality, etc? Thanks.
 
I'll be following this because I need some also. The ones I bought for my 81 work but they are a little to thick and hold the door out a little.
 
For YJ door panels, I bought a pair of new ones from autointeriorkits on ebay for fifty bucks delivered. I think they went up a few dollars since then but still way cheap. I bought their upholstery kit for the front seats for my CJ7 and that worked out well. It was 240 bucks at the time. I wanted to keep the original seats so the kit worked for me. I don't know of anyone making the CJ7-8 door panels. Anyone have a source for those?
 
The YJ door panels I bought came from Monterey Park, Ca . . . near autointerior kits. I see they are on ebay for just under 50 bucks now delivered. Two colors . . . black and spice. I see that someone in Geroga is making CJ styles for $85 a pair. Looks like he sews them up, all made by hand. Not heat sealed like original but probably nice.
 
I'll be following this because I need some also. The ones I bought for my 81 work but they are a little to thick and hold the door out a little.

I never have had ANY success getting the new seals to make a door sit flush, that IF prior to installing the seal was sitting flush or the door wasn't warped from the crack that develops by the quarter window. they just make them too thick in areas and it is maddening. For my own Jeeps, believe it or not, I reuse old seals from old doors that have an intact seal that somehow survived..
 
That is my same experience. My CJ8 door seals are shot, but the YJs are descent. I plan on painting the YJ this summer and may be able to re-use them on the CJ8. That would leave the puffy doors on the YJ. I was really hoping that someone had found a company that makes them the right size to replace them on both Jeeps.

As for door panels, the CJ is the important one. I see Collins Brothers sells a set that look pretty close http://collinsbrosjeep.com/81-86-cj-black-hard-door-panels-pair/ and may go that way.
 
Nutmeg?

So I was in traffic the other day and pulled up behind a new Toyota Tundra p/u. The rear cab window was rolled down and the rear seat headrests were clearly visible in the opening. All I saw was... NUTMEG! The color of the interior was the closest I've seen to the old Jeep nutmeg which translates to the color and material being available somewhere, .. in Japan maybe, ...or over here?

0352_toyota_tundra_11__1jpgitokkvaJRI7C-1.jpg

2014_Toyota_Tundra_1794_0581-1.jpg
 
So I was in traffic the other day and pulled up behind a new Toyota Tundra p/u. The rear cab window was rolled down and the rear seat headrests were clearly visible in the opening. All I saw was... NUTMEG! The color of the interior was the closest I've seen to the old Jeep nutmeg which translates to the color and material being available somewhere, .. in Japan maybe, ...or over here?

0352_toyota_tundra_11__1jpgitokkvaJRI7C-1.jpg

2014_Toyota_Tundra_1794_0581-1.jpg

That sure does look nutmeggy. Color can be had in aftermarket materials if you look at the replacement seat covers being sold online. It's just that the blotchy, not so durable, and often green turning original nutmeg material originally used in our scramblers and other beloved jeeps is unavailable. :wave:
 
Back
Top