• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

What do you call these, where could I get them?

Flatie46

Legacy Registered User
City
Russllville
State
TN
0505212046a.jpg
Looking for this, its in the front part of my frame 7/16-14 bolt hole I think. I could make something but would rather just buy what goes in it if I can. Looks like a nut sleeve or something.0505212046a.jpg0505212046a.jpg
 
It is a nut that is welded inside the frame... if yours are missing or snapped off, you can look up how to fix those as there are a ton of articles to cut, put in, weld back up... or even "nutserts" will work potentially...

cb
 
Technically they are called weldnuts. They usually get presswelded ( resistance weld) into place. We use them all the time in our business here. Check with you local fastener company.
 
Technically they are called weldnuts. They usually get presswelded ( resistance weld) into place. We use them all the time in our business here. Check with you local fastener company.
But note that you aren’t likely going to install it as they came from the factory. I wouldn’t worry too much about finding an exact replacement. You basically have to do whatever you can to get another nut of the right size held in place there.
 
I bought some 5/16 ones from Lawson Products on line for a skid plate project.

 
Last edited:
But note that you aren’t likely going to install it as they came from the factory. I wouldn’t worry too much about finding an exact replacement. You basically have to do whatever you can to get another nut of the right size held in place there.
Yea that's what I was thinking, be hard to get a mig on it. I thought about just cutting a square piece, drilling and tapping it, sliding it in the access hole, maybe drill two 1/4" holes in the top of the frame and plug weld it thru there. That way it couldn't move when you tightened it.
 
I’ve just welded a nut to a piece of strap steel and gotten the bolt started and then cranked it down. You have to be able to hold the steel while you start it though.

I like your plug weld idea as long as you’re confident in the surrounding frame steel and that you’re not creating a weak spot in the frame.
 
I’ve just welded a nut to a piece of strap steel and gotten the bolt started and then cranked it down. You have to be able to hold the steel while you start it though.

I like your plug weld idea as long as you’re confident in the surrounding frame steel and that you’re not creating a weak spot in the frame.
It's really solid, I'm really impressed with it's lack of rust. I think it will be fine, I have some cracks to weld up and some of the very poor factory welds need going over. I kinda thought this was what I would do from the beginning but I like to ask questions on here like this, never know if someone has found a better way.
 
Back
Top