BigThicket
Basic User
- City
- NACOGDOCHES
- State
- TX
Oops...facebook permission error.
[/URL][/IMG]
[/URL][/IMG]
What's on your Work Bench?
- Thread starter certifiablejeep
- Start date
- City
- stafford
- State
- va
Too big for the workbench
PetesCj-8
CJ-8 Member
- City
- slatington
- State
- pa
Sent from my SM-N910P
Enjoying the sandblasting cabinet? 🙂
- City
- Bedford
- State
- NH
Shocks for th he ram. Kidneys need a break
cb
Sent from the garage
cb
Sent from the garage
- City
- W-S
- State
- NC
Not necessarily on the bench but that's where it started. I finally got around to mounting the front and back LED work lights and the turn/hazard lights and the red tail lights. This is for the cab enclosure that I fabricated a while back. I still need to get glass put in it so if any of you guys have any suggestions let me know.
Here's a shot of the front
And the back
Here's the small 3/4" penny lights in red and amber at the back. I also installed amber ones on the front of the cab so as to cover all 4 corners.
And the switch box I fabbed up. All the wiring is going into black plastic loom to tidy it up
That's how we keep it simple around here
Here's a shot of the front
And the back
Here's the small 3/4" penny lights in red and amber at the back. I also installed amber ones on the front of the cab so as to cover all 4 corners.
And the switch box I fabbed up. All the wiring is going into black plastic loom to tidy it up
That's how we keep it simple around here
- City
- West Friendship
- State
- MD
por15 is great stuff . Try to scrub it off isnt.
Sent from my SM-N910P
Wow. When I did my small bit of por on my frame I wore gloves and was exceedingly careful and didn't get a drop on me. I then took my gloves off and went to clean up and picked up the can and got it all over my hand. I just left it and waited for the skin to die. You seem to have removed the affected skin
- City
- BROOKLYN
- State
- NY
Well im blaming my wife as she left this sponge in the shower called the majic eraser. It worked great. I was like por15 got nothing on me..... Till i got out of the shower.. [emoji35] [emoji35] [emoji35] [emoji35] [emoji35] lol
Sent from my SM-N910P
Sent from my SM-N910P
- City
- Ashburn
- State
- VA
You used the magic eraser? No wonder. That is basically sand paper. Good times.
- City
- Landing
- State
- NJ
This L shaped bench resides in an old truck box that used to be a liquor delivery truck with old cutty shark markings on it under layers of old paint. This bench needs some spring cleaning again.
- City
- God's Country
- State
- AR
This L shaped bench resides in an old truck box that used to be a liquor delivery truck with old cutty shark markings on it under layers of old paint. This bench needs some spring cleaning again.
If I walked into that I would be like the kids in the Goonies when they dropped into the cave where One Eye'd Willies ship was anchored.
- City
- Bedford
- State
- NH
Every tool and it's mother to remove spot welds
cb
Sent from the garage
cb
Sent from the garage
- City
- Cobourg, Ontario, Cana
- State
- da
I have one of those. LOVE IT! I got mine from Summit. Just get extra bits for it.
- City
- Bedford
- State
- NH
Unfortuantely spot weld cutters only work when you can see the spot weld itself.
A lot of this bed stuff had rust... and pitting... and pits look like spot welds and a lot of time has been spent trying to figure out what is going on.
I do have spot weld cutters too like that, they are good, just not practical all the time sadly.
cb
A lot of this bed stuff had rust... and pitting... and pits look like spot welds and a lot of time has been spent trying to figure out what is going on.
I do have spot weld cutters too like that, they are good, just not practical all the time sadly.
cb
I currently am workbench-less
- City
- stafford
- State
- va
You'll have one soon enough[emoji106]