• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

What's on your Work Bench?

joshvt

Scrambler Enthusiast
Lifetime Member
City
charlotte
State
nc
Don't suppose have a nice printable template for that skateboard tape do you?
I have one of these grip tapes that is precut- the P.O. gave it to me when I bought my Jeep, but I have never gotten around to sticking it on. I could scan it and send you a full scale PDF, if that would help?
 

wm69

Scrambler Junkie
Silver Member
Lifetime Member
City
God's Country
State
AR
That would be awesome. Then I can use it as a template to cut some new ones out. The part where the stop goes up looks like it would need a little curve, so I've put off trying to cut new ones.
 

certifiablejeep

Definitley Certifiable
Lifetime Member
City
Bedford
State
NH
Trying to save all the scrambler specific parts from this 82

20180812_160157.jpg

20180812_155052.jpg

Yes I realize the wood splitter isn't an 82 but have been splitting all week as well

20180810_170740.jpg

It also has been super swampy HHH put there but still doing this nightly

20180808_181820.jpg
 

wm69

Scrambler Junkie
Silver Member
Lifetime Member
City
God's Country
State
AR
I have one of these grip tapes that is precut- the P.O. gave it to me when I bought my Jeep, but I have never gotten around to sticking it on. I could scan it and send you a full scale PDF, if that would help?

Big thank you to Josh for scanning and emailing me a couple of PDF files of the grip tape!
 

Rosco1974

Scrambler Junkie
BENEFACTOR
Gold Member
Lifetime Member
City
Oklahoma City
State
OK
Off the next 9 days. Gotta get my YJ project running and go through these. And yes that a HF trailer on my mower. Cant carry these things like I used too. Improvise, overcome, adapt. 20181005_165947.jpg20181005_165624.jpg
 

masscj2a

Rebuilding America's Jeep
BENEFACTOR
Gold Member
Lifetime Member
City
Ware
State
MA
Off the next 9 days. Gotta get my YJ project running and go through these. And yes that a HF trailer on my mower. Cant carry these things like I used too. Improvise, overcome, adapt. View attachment 66937View attachment 66938


I could use that non 8274 for my YJ project. Send it my way and you won't have to worry about lugging it around anymore................
 

93_Fummins

CJ-8 Member
City
Edmond
State
OK
ax15 teardown.jpg

Tearing down the AX-15 I picked up a while back to replace the synchronizers. Sharp eyes will notice the c-clip I forgot to put back into the main cluster...
 

jammer1

Scrambler Junkie
Lifetime Member
City
Maple Hts.
State
Oh
20181115_182332_resized.jpg
Dash came in for the fiberglass cj8 build I'm restarting this week. A sure sign winters starting. Dan at Double D Fab did a nice job on the dash.
 

Cmath

Scrambler Enthusiast
Lifetime Member
City
Woodstock
State
Ga
Rebuilding the dana300 with JB conversions low gear set. A Sunday rebuild turned into a few weeks.
Had to machine the shift rail housing for larger bearing for upgraded front shaft. I wasn’t sure if I could pull it off without messing it up and it took some time to find someone nice enough to fool with it. Got it back today and going out of town tomorrow for the holiday.Oh well, another week it is.
 

Attachments

  • DBEC23D9-D282-4F29-9CF4-F85F5B46B7E1.jpeg
    DBEC23D9-D282-4F29-9CF4-F85F5B46B7E1.jpeg
    151.9 KB · Views: 7
  • 2B0F2B13-0CEC-490B-B5BC-AD4D6E35999B.jpeg
    2B0F2B13-0CEC-490B-B5BC-AD4D6E35999B.jpeg
    137.8 KB · Views: 6
  • 28FAFE20-CDC5-4E77-A21E-DE00AC2C98C1.jpeg
    28FAFE20-CDC5-4E77-A21E-DE00AC2C98C1.jpeg
    123 KB · Views: 4
  • FE093BA5-5E4A-44CC-B639-F2921BA5859F.jpeg
    FE093BA5-5E4A-44CC-B639-F2921BA5859F.jpeg
    123.1 KB · Views: 5

Rosco1974

Scrambler Junkie
BENEFACTOR
Gold Member
Lifetime Member
City
Oklahoma City
State
OK
Just sold a couple and working on one myself.
20181206_185608.jpg
 

Rosco1974

Scrambler Junkie
BENEFACTOR
Gold Member
Lifetime Member
City
Oklahoma City
State
OK
New solenoids? If so, what are you using?

Top two are not original. I bought 5+ 8274s this year. Several have been serviced/repaired @ Six States using these solenoids. The manufacturer is Snowplow Aftermarket Manufacturing (S.A.M.) and I have seen PN# SAM0505 and SAM0709. I have not done all the research, but there are several continuous HD solenoids in their parts line.
 

certifiablejeep

Definitley Certifiable
Lifetime Member
City
Bedford
State
NH
Making some extras, I had run out... actually I have a family member that is getting one for Christmas as well, so needed to get that moving... these take a while to make and layout and I am running out of time.

cb

20181213_164527_resized.jpg

20181213_164538_resized.jpg

20181213_184808_resized.jpg

PS> Obviously I can't show the 3rd one I am making or it wouldn't be a surprise!
 
Top