• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Charlie's cummins diesel transplant thread

Sounds great Charlie!!!

We just returned home from our trip to Moab last night (trailered the Rubicon). Now it's time to focus on the Scrambler...
 
Doug,

Go buy that breadtruck before I do! I don't need to do another conversion, but now everytime I see an 60 or 80 Land Cruiser series I think, well it would make a great wheelable daily driver (sleeper).

Glad to hear you went to Moab, I hope you had a blast.
 
Doug,

Go buy that breadtruck before I do! I don't need to do another conversion, but now everytime I see an 60 or 80 Land Cruiser series I think, well it would make a great wheelable daily driver (sleeper).

Glad to hear you went to Moab, I hope you had a blast.

Not ready to buy the motor yet, going to focus on the chassis first.
disclaimer: unless an extremely awesome deal was to pop up on a p-pumped 4BT

Moab was awesome!!! I'll get the pics up soon. Here's a teaser...driving the Rubi into the Belly Button Bowl.
DSC05761-1.jpg
 
Last edited:
I mountainbiked slickrock when I was 15, but haven't been back since 95'. Maybe this winter I will get back out to the Southwest with the Jeep.

I drove the jeep to the exhaust shop yesterday. It was about a 35 mile ride from the Mashpee to Pl;ymouth. The jeep rolled down the highway flawlessly between 65-75 mph. I was worried about it not having enough power on the hills, but my worries have now subsided. The low end torque suits my driving much better. I must say it was wierd seeing the mechanic drive it into the shop. I think he was very stoked to drive it the 10 feet onto his lift.
 
I mountainbiked slickrock when I was 15, but haven't been back since 95'. Maybe this winter I will get back out to the Southwest with the Jeep.

I drove the jeep to the exhaust shop yesterday. It was about a 35 mile ride from the Mashpee to Pl;ymouth. The jeep rolled down the highway flawlessly between 65-75 mph. I was worried about it not having enough power on the hills, but my worries have now subsided. The low end torque suits my driving much better. I must say it was wierd seeing the mechanic drive it into the shop. I think he was very stoked to drive it the 10 feet onto his lift.

What diameter pipe did they use? Did they make the downpipe, or were you able to use the one from the bread truck?
 
What diameter pipe did they use? Did they make the downpipe, or were you able to use the one from the bread truck?

We recycled the BT's downpipe and are going 3". Any larger and I will have to explain my "small man" theory. I bought a 3" muffler from NAPA for $75 and gave that to the exhaust shop, I want it as quiet as possible. I will after all be driving it a lot on VT's unmaintained roads and don't need the neighbors' collective nickers to get in a twist. My goal for this jeep is functionality rather than head turning, so 3" will be plenty.
 
I know you took pics of the drive to the shop and the new exhaust, you just forgot to post them, right ;)

Great to hear about the first drive, I'll never forget the open header drive to the shop to get the exhaust installed after the 4.0 swap in mine... so you're just making excuses to drive/enjoy it now, right? :thumbsup:

Congrats!
 
I fueled it for the first time (at a pump) last night. Here's the proof!
Jeep%20at%20diesel%20pump.bmp.jpg

Finished the custom snorkel as well. I really wish I had remembered my camera for this part of the project. There are at least 4 compound cuts in the aluminum tubing all of which is tigged together.
Jeep%20at%20diesel%20pump%202.bmp.jpg


I'm now scrambling like a fool to get the rest of my kit together for a trip tomorrow which will begin at the Canadian border and end at the Mass/VT line. The goal of the trip is to travel at least one class IV road in every town along the way south. The club I joined has been doing it for years, but this will be my first trip. I'll remember to take some action pictures. Thanks again for following this thread.-Charlie
 
Last edited:
I was woundering what was your full drivetrain set up, tranmition to wheels, and what is your estimated mpg with it so far
 
Not sure how Charlie is doing MPG wise, but the talk on 4BT Swaps Forum is 30MPG in a CJ7.
 
I have heard of heard any wear form 20-30 mpg depending on the set up. some guys complain about getting 20 mpg with like 36 in mud tires. Just woundering what he is getting wiht his set up
 
Gents,

Looks like 19 mpg is my initial number. That was 50% percent trail though, with a smattering of highway driving. It should go up a little, but I do not expect to get over 21ish when all is said and done. My VE pump is turned up 30% over stock and the jeep weighed 5200 Lbs (!!!) not uncluding the 12 gallons of water I was carrying in jugs and the 165lb passenger and his stuff that I dropped off just before I weighed it. Needless to say, I need new springs. My axle splits are 3020lbs for the front and just over 2200lbs in the rear, that was with me (210lbs) in the jeep. I mention this only because I thought I was closer to 4000lbs. The owner of the gravel pit where I weighed the truck had a newish chevy tahoe which she pulled on the scale for me, that weighed 5560 as a point of reference.

Now its take pictures of my current springs and email them, along with a bunch of measurements to Deaver spring for something tailored to fit the jeep. I'll definitely be going with YJ 2.5" wide springs up front. I'll post up some pictures soon.

Did I mention it performed incredibly well on the trail? I had the throttle control the gasser never would allow, no stinkyness or leaking fuel and the ability to lug the motor down to 600rpms so as not to break traction while climbing and still have torque enough to keep the motor running.
 
sounds awesome, how was its driveability on the highway? or did you get enough highway to tell? Mostly curious about highway performance on the hills and for passing/keeping up with traffic.

Deaver makes nice springs, I'm sure you'll be happy with them, I've got Alcan's on mine and love them, WAYYYY better than any springs I've used in the past, when I was looking for springs they were significanty cheaper than National or Deaver FWIW, and they are semi local for me at only about 400 miles away. But I know that Deaver makes a very nice product as well.
 
Trust,

I can't say enough about the performance. I could do 70-75 easily on the highways here in New England, climb grades (steep mountainy stuff) with no power loss, pass people, etc. The only limiting factor was sway in the rear from my worn springs. The motor runs equally as strong on the highway as the old LT1. I'm currently running a .73 overdrive in the NV4500, 3.31 gears and 33" tires (which actually measure about 31+") to give you a point of reference.

Regarding the springs, I will talk to Alcan as well, I have heard great things about them and less expensive would definitely be better for me right now. Thanks for the advice.

http://picasaweb.google.com/charlievenezia/TVTX09#
 
Last edited:
wow, thanks for the info, I was afraid you'd say that..... sure complicates my thinking on a pathforward of my own
 
Okay Charlie it's been another month, how about an update?

Been keeping up w/ your mileage? Better/worse/same?

Any update on the r. springs?
 
Okay Charlie it's been another month, how about an update?

Been keeping up w/ your mileage? Better/worse/same?

Any update on the r. springs?

Hey,

Things have been slow in the Jeep department for the past month. I really havn't driven it much since the springs were so weak in the back. I had a driveline whine which turned out to be a U-joint. It's failure is directly related to a lack of angle between the shaft and the pinion yoke which apparently doesn't allow it to lubricate itself correctly. Since the springs are flattened it has allowed the axle to roll a little, plus there are shims in there which probably don't need to be. My new Alcans have literally arrived today and should go in this month. I would put them in quickly, but the shackle reversal kit for the front is going to require some time. It still jumps out of third gear, which we have apparently narrowed down to synchros, so the NV4500 will need to come out too. More $ that I'd rather not spend, especially when I had it out and "gone through" in September.

I havn't driven it enough to give you a detailed mileage report. I would say that it's getting closer to 23 by my estimates, but I'll need to collect some data when I am driving it more. Oddly enough, I went to fuel it the other day and when I went to start it back up it had lost its prime and I had to crack the injectors. I only put 17.8 gallons in (the needle was as empty as it had ever been) the 20 gallon tank too. I was surprised because with the LT1 I had put in over 19 before. My buddy attributed it to foam volume, but I'm not convinced. It's the only time it has happened but it still vexes me. Something must be up with the vent system in the tank. It makes the same sucking noise when the cap is removed that it always has, but I realize none of my diesel pickups make that noise. Irregardless I need to install a different filler neck becuase the old one isn't capable of taking even an automotive sized diesel nozzle, never mind a truck nozle or even the Sceptre jerry can filler neck I have.

Either way, I'm still in love with the conversion. When it's all done and the tranny doesn't jump out of gear any more I will be hard to extract from the driver's seat. (please pardon my spelling and punct. I'm a bit rushed with this post.)
 
Last edited:
I drove the bread truck a few hundred miles Tuesday and Wednesday and want to report fuel consumption.

243 miles on 11.6 gallons of diesel. That's 21 mpg. Granted that is with winter blend fuel and a full quart of Power Service driving 65-70 mph in a headwind. I find winter blend diesel to not produce the same economy as the summer stuff, so look for an improvement when it warms up. I am at the halfway point again on the gauge so I'll fill up see what the drive home from Vt produced for mileage. I'm going to attach some pictures of my brief winter jaunt.

12-24-09%20021.JPG

12-24-09%20012.JPG

12-24-09%20024.JPG
 
Last edited:
Winter blend does suck when it comes to fuel economy, not to mention driving through cold air. (more dense than warm air)

I sold my Dodge Charlie, buying another Scrambler, a driver this time. it's in Fla. Going to pick it up next weekend, Jan. 1.
 
Back
Top