
Holy gigantic picture, Bigman!!
It does have a fold down windshield, just can't see in those first pics, just like a JK with the hinge in the middle
That's a consolation, but I don't see how that hinge works in relation to the side braces. Plus, how does it fold down with those wipers in that location and where does it strap down to hold it from blowing up? I've never seen a JK with the windshield down, although I knew that they contained a hinge. Have you ever had the WS down on your JK? It looks like those side body-to-WS braces need to be unbolted, as I don't see a seam in those locations.
I typically drive my Jeeps with the windshield down on the hood, but that option also requires some up and down transitions due to certain road travel on each trip. These modern Jeeps look like they wouldn't accomodate that driving style very well. I can probably have the WS up or down on the CJ8 models in about 20 seconds and 10 seconds in the FSJ models. How long does it take on a JK?
BTW, that's a great picture of the new Jeep with the Lasalle Mountains in the background. I still think there is some room for improvement on that Jeep design. Getting "goo-goo eyed" over it, in its present form, can only result in misleading Fiat into thinking that they've got a sure-fire hit at their Jeep dealer showrooms (I'm sure they read these blogs). I'm not saying that I wouldn't buy one, but it certainly isn't something that I've just got to have in my driveway. Thankfully, it is just a concept, so I'm sure there would be some changes before it were ever to hit showrooms. Maybe the Jeep guys will acknowledge some of the criticism and build a small truck that will endure longer than that silly little roadster truck that Chevrolet put out ten years ago (yep, I just compared the Nukizer to the SSR and PT Cruiser generation).
This Nukiser concept could easily be one of those "got to have" vehicles with some minor tweaks. It doesn't have to be perfect, as that is unrealistic with anything in life. Although, providing more bed space by ditching the spare tire location, lengthening & widening the cargo box, and increasing the cab height (by ditching the "low-rider" appearance) would make it more utilitarian. It would likely sell better in this revised form.
Lastly, an attempt at perfection would include the following ideas, IMO. I don't like to have the roll bars in my front view area either, so I'd ditch the full cage idea in the cab area, and leave that to the extreme off-road guys to design in their garages. The top has definitely got to include a rain gutter above the door openings, and of course it needs to have side windows in the doors.

As mentioned before, I wouldn't run those pontoon tires on a utility truck either, but rather some tall and narrow, good-in-the-snow tires. Therefore, I'd prefer to see slimmer fender flares that don't resemble a '40's rat-rod. I'd also go back to cowl/WS mounted side mirrors, if those doors remain the removeable type. Otherwise, how would I see behind me with the doors off and the WS down?
Jeez, maybe I should just send the Mopar guys a resume and help them out by using all my practical ideas.
