• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Need a little prayer

Ford has an Official Upgrade steel panel to replace the cardboard that was originally there. It is sheet metal and was designed about the time of the Exploding Vega's. The big issue is that in a real bad rear end the Fuel tank can rupture and the fire will get into passenger area.

So for a safety upgrade they allow that update panel for Concurs judging. Might make sense to try and track one down. Year One out of Ga, would be a good start. Heck the Ford Dealer might still offer them.



Carl
 
I can't wait to see this all come together...

Thanks... I too am getting excited to see it finally progressing

Ford has an Official Upgrade steel panel to replace the cardboard that was originally there. It is sheet metal and was designed about the time of the Exploding Vega's. The big issue is that in a real bad rear end the Fuel tank can rupture and the fire will get into passenger area.

So for a safety upgrade they allow that update panel for Concurs judging. Might make sense to try and track one down. Year One out of Ga, would be a good start. Heck the Ford Dealer might still offer them.



Carl

They actually make a steel version of the divider.
 
Another day of chomping thru stuff.



So I had one broken bolt left to take care of. One of the front bumper bracket bolts broke off.



dad240.jpg




What I typicly do when they are broken off in this manner I just plug weld a nut to the bolt. After welded I soak it down with PB blaster. I have been very successfull using this technique.



dad241.jpg




I was able to crack the bolt back and forth about 1/4" when it popped the bolt again--these bolts are VERY soft.



dad242.jpg




So I just simply drilled the bolt out and ran the old threads out with a tap.



dad243.jpg




So I grabbed the my dedicated grinder with a big ol wire wheel and sucked on some red dust for a while. Got both sides cleaned and then killed the rust and painted them up.



dad244.jpg




dad245.jpg




So I can put that under my DONE list....
 
I went ahead and got a couple of the cables made to get that out of the way.



The starter cable.



dad246.jpg




The ground cable



dad247.jpg




Once I get the battery tray I can finish up the last 2 cables.
 
I decided to change gears and decided to tackle the passenger seat I started. So far the lower seat was the hardest. But I got it done with the seat tracks all bolted down. Thank goodness I chose to leave the drivers side togehter so I would remember how the springs/cross cable went. But the seat track works like silk..



dad248.jpg




It turned out pretty decent.



dad249.jpg




The back cover turned out harder than I thought. I thought I would be able to pop it right on--but it took some trimming where the clips go thru and I had to bend the clips a tad here and there.



dad250.jpg




One together--well almost. I need the trim parts to fully finish it. But I am getting there.



dad251.jpg




Just for giggles--and something else to get my dad excited.



dad252.jpg
 
Time to dig into the drivers seat.



dad253.jpg




Way back when I dragged the seats into the back area of my shop an insert had fallen out of one of the seats. I thought nothing of it but yet kept it and stuck it in the pile of removed seat parts. Well when I did the passenger seat I didn't notice anything missing.



Well when I tore the driver seat back apart I noticed the stop that lets you slightly adjust how far back it goes was not there. Well I looked at the spot the adjuster screws into and it was just a hole--found where the insert goes.



dad254.jpg




So I fixed that up and should be good to go now.



dad255.jpg




Now I knew the seat base frame was broken(have a new one sitting here).



dad256.jpg




But I didn't relize it was THAT bad.



dad257.jpg




So I got the seat back frame cleaned and painted



dad258.jpg




Just like the passenger seat tracks I tore these apart and cleaned them and replaced the studs and threw some paint on them.



dad259.jpg




I haven't completed the seats but I have completed the mess from tearing them apart--so I can put that under the DONE list,lol...
 
Update.



My dad had planned on starting his 6th cemo treatment tommorow but has had some bad pain the last week. My mom took him to the ER and they admitted him about an hour. He has a blood clot in one of his lungs. I don't know exactly what this means right now or what it could intale. I will hopefully find out more tommorow.
 
Thoughts and prayers going out to your dad and family crash.
 
Crash, I hope this is just a minor hiccup and is strong enough to continue on. Prayers are out.

Truck
 
I left work early and went to visit him in the hospital. It seams a blood clot had formed in his leg and a piece broke off and entered his lung. I guess for some this is an after affect of the chemo but the doctors have him on meds(blood thinner) and are sure it can easily be corrected. He was in good spirits and had a nice visit.

Truck its funny you use that term "hickup"--thats something my mom says,lol...


Thanks guys I am still keeping positive and still pushing allot of my energy into his car to keep my head straight..
 
Thanks for letting us share the journey with you and your family Mike.

Our prayers are with you.

jeff&Kate
 
Thanks guys.

Well guys he went home today and is feeling great. I think he was excited to sleep in his own bed finally,lol...
 
Ok I got the seat base all done with the new seat frame. It turned out just as nice as the passenger side. So now I can move the car in style and not sitting on a milk crate,lol.



dad260.jpg




The seat back frame took a little work mainly because the pivat arms (that connect it to the seat base) were bent out of shape from the broke seat base. So it took a little work to get them back into shape but the seat back is done except for the back cover.



dad261.jpg
 
I went and swapped over the trunk lid and threw in the latch so it will stay closed. I also put both doors on and somewhat got them aligned.



dad262.jpg
 
Now this will blow your socks off. This has to be some of my best work. Look at how nice the battery mount and cables turned out--its da ****,lol.. No Pm's please regarding me making more--ha ha ha..



dad263.jpg




dad264.jpg




dad265.jpg




See--total PIMP my ride stuff there...



The battery mount has not shown yet so I had to throw something in there for the time being---ya it looks like total butt,lol...
 
HA---I finally got the damn radio antenea off--little bugger...



dad266.jpg




I also did a bunch of odds and ends to get it ready.



Ohhh--loook. Dash lights work. Also the under dash lights are NICE---boy my dad is going to like that...



dad267.jpg




And here the car sits all ready to load onto my trailer tommorow night.



dad268.jpg






Stash of stuff I gotta take with me.



dad269.jpg




So the plan is to haul it to the guys place saturday after work. Once he gets it I won't have allot of updated pics. But I do have a few more things to finish up while its gone.
 
How long do you think it will be for the body/paint work?

And I LOLed at the battery mount :rotfl:
 
Dangit! All the good stuff is always on the west coast! Crash - do you know of an east coast supplier where we can get some greasy, knarly, splintered and beat-up chunks of rotted wood to build our own battery brackets over here? :huh::D

Seriously, though, glad to hear your Dad is doing better after the latest scare. Let him know we are all pulling for him!

And, of course, NICE work on the 'stang!
 
Back
Top