• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Need a little prayer

I had called my dad and asked how he wanted the park lamps to work--he wanted them on with the headlamps. That was a simple wire deal at trhe switch (tie black to the black/yellow). I also replaced the headlights (one was out) and got the headlight buckets all mounted correctly.

dad481.jpg


Also got the wiper arms polished and thrown on. One of them was bent up and luckily had a GOOD spare in the stash of parts.

dad482.jpg


I got the spray nozzles for the washers cleaned up and painted along with the air cleaner housing. I will grab some washer hose and get that done tommorow.

My list is shrinking...
 
Well its official I have put a day on the book to give my dad his car.

We will be having a big get together (friends/family) at my place on April 9th where we will give him his car in style...
 
day

Well its official I have put a day on the book to give my dad his car.

We will be having a big get together (friends/family) at my place on April 9th where we will give him his car in style...

Brother thats great wish i could be there with ya'll, we all will be there in spirit with you, you and your dad are still in our prayers and will continue to be, i know all your hard work will be rewarded when your dad see's the car and turns the key over for the first time! There will be so many stories and memories made that day that nothing could or will ever replace that moment and will never fade from memory. Wish you and your family the best!:thumbsup:
 
COOL! That will be one VERY heavily attended event "in spirit", like JC mentioned :thumbsup:
 
Thanks guys. It should be a good day with memories of it all for the rest of my life...

And JC---"how ya doin" :wave:
 
Damn--I am running out of things to do,lol..

Well I am kinda bummed as one of my plans won't be able to be done. I was going to take the mavrick air cleaner and the stock stang air cleaner and graph them together to make the stock one work. Well due to the depth of the mavrick air cleaner, the choke and how tall the carb sits I was unable to mke it work. So for now I chose to just paint the air cleaner. Later on down the road we can do something different. At least the blue doesn't look tooo bad.

dad483.jpg


I also found the correct vented fill cap.
 
Next on the list--washer system. The poor nozzles were pretty rough. So I hand sanded and polished the copper tube. The of course some paint.

dad484.jpg


One thing I could not believe I had a hard time finding and that was 7/64 hose for the washers. Not a single parts store had it--but I had it at work, go figure.

So I ran the hose to the nozzles and down to the pump.

dad485.jpg


dad486.jpg


I can't believe how much fluid this bag holds---I was rather impressed.

dad487.jpg


I ran the system and well--the pump is weak but will work for now..

So what does that leave in the engine bay to be finished---just throw a set of points in the distributor and set the dwell--and I can scratch that off the list.....

Damn...........
 
Lookin great, Crash. You better take lots of pics at the reveal and post them up. You know we will all be there in spirit!
 
Looks great Crash! :drool:

The bumper valance panel you just installed, painted black, 'should' be body color.
I'm Just saying in case you were unsure. I'm not nit-picking, your doing a WONDERFUL job!

It really does look great, I look foreward to seeing more pics :thumbsup: :drool:


:popcorn:
 
It's ok, methinks it was never available stock in that particular green anyway ;)
 
Your dad is going to be so overwhelmed you need to pay attention to medical conditions he's never encountered. After seeing the finished product you may be applying CPR.:thumbsup:
 
Lookin great, Crash. You better take lots of pics at the reveal and post them up. You know we will all be there in spirit!

Oh ya--and Video :cool:

Looks great Crash! :drool:

The bumper valance panel you just installed, painted black, 'should' be body color.
I'm Just saying in case you were unsure. I'm not nit-picking, your doing a WONDERFUL job!

It really does look great, I look foreward to seeing more pics :thumbsup:


:popcorn:

Oh ya :D I figured it was smart to fit it first before it got painted :cheers:

It's ok, methinks it was never available stock in that particular green anyway ;)

but but but..........................

Your dad is going to be so overwhelmed you need to pay attention to medical conditions he's never encountered. After seeing the finished product you may be applying CPR.

Will have a chair and oxygen ready :thumbsup:

:thumbsup: :thumbsup:

(That's two thumbs up for ya!!)

Thank you sir for those 2 wonderful thumbs up.
 
Well the last few days have been very trying as I am pushing to get the car ready for this saturday's big event.

Well I started by running the motor hot since everything under the hood has been done. Well I was looking and found coolant on the grill--***. I looked and found a leak on the front core/drivers side.

dad488.jpg


No biggy and I pulled the radiator and soldered it up.

dad489.jpg


dad490.jpg


This is where the tailspin starts. Found another small pinhole and fixed that and the upper rad hose goes to twice its size--screw it and ordered coolant hoses and threw them on.

dad491.jpg


At this point I am thinking its gotta get better now--right..

Sitting here and steam starts coming from under the hood.

dad492.jpg


Ya coolant ALL OVER. I ended up having to pull the rad 3 more times with the last I redid about 3" of the rad.

dad493.jpg


So I ran it again and damnit--there is a seep on the passenger side down in the middle of the core to where I would have to remove fins---crap. I guess we will have to add that to the needed replacement here soon list..
 
So to add to the frustration. I had a bad feeling about a noise I heard(suspected the trans) when I first drove it.

Well I have drivin it about 5-6 times to get the brakes adjusted and figure the noise out. Its a loud thump(sounds more like an engine knock) in first gear and you can slightly hear it in reverse. Looking at the manual(I have a factory manual--old skool) and the powerflow it looks like its coming from the countershaft and more than likely the bearings in the shaft. I drained the fluid that I replaced like 4 months ago (And with .4 miles on it) and the magnet is full of metal and the fluid is nice and metalic--crap...

So now I am---well ya...
 
Rebuild blues

So to add to the frustration. I had a bad feeling about a noise I heard(suspected the trans) when I first drove it.

Well I have drivin it about 5-6 times to get the brakes adjusted and figure the noise out. Its a loud thump(sounds more like an engine knock) in first gear and you can slightly hear it in reverse. Looking at the manual(I have a factory manual--old skool) and the powerflow it looks like its coming from the countershaft and more than likely the bearings in the shaft. I drained the fluid that I replaced like 4 months ago (And with .4 miles on it) and the magnet is full of metal and the fluid is nice and metalic--crap...

So now I am---well ya...

Hang in there brother, I know you can do this, Don't think for a second there isn't any of us that hasn't had the feeling where you know everything is done right and perfect and only after the first test run to find out, there are issues, even if there are loose ends to finish after your dad gets the car i can assure you he is going to be thrilled with the work you have done on it in such a short amount of time, won't be long he will be cruising around in it and will be the envy of everyone!:thumbsup::cheers:
 
Last edited:
So pushing forward pass the "bad" stuff I am hitting the trunk full bore.

Don never got the upper edge of the quarter panels sealed up. Well I didn't realize it was all the way up to the door jamb. Great. So now I can either pull the interior apart or get crafty. Well I can see all the way down the edge from the trunk so I made this little wonder.

dad494.jpg


So I crawled into the trunk and shoved my face up against the inner of the quarter panel and gooped the stuff in. I ended up doing 2 good heavy coats and I got it all. Heck I even got the back side of the door jamb. Ya I can fit comfortably in the trunk.

dad495.jpg
 
So again I learned more good stuff. I didn't realize this panel went in the spot. It made sense with the holes in the trunk and I had to notch it for the wiring and ran it down under the panel.

dad496.jpg


I cleaned the insert/cover. Man the colors back then really gotta make you laugh. Its really in good shape and I didn't realize it was contoured to fit the trunk like it does (only been a number of months since I removed it).

dad497.jpg


dad498.jpg


I also found the hardware that holds the spare tire in a box of stuff. So cleaned it up and painted it. The only think missing is the factory sizer jack. I had to search for pictures to see what was in there and how it was setup and found the jack sits under the tire to keep it horizontal.

dad499.jpg


So getting closer. Throwing the car on the trailer in the am and taking it to work to put it on the alignment rack.
 
Hang in there brother, I know you can do this, Don't think for a second there isn't any of us that hasn't had the feeling where you know everything is done right and perfect and only after the first test run to find out, there are issues, even if there are loose ends to finish after your dad gets the car i can assure you he is going to be thrilled with the work you have done on it in such a short amount of time, won't be long he will be cruising around in it and will be the envy of everyone!:thumbsup::cheers:

Thanks JC. Ya I am holding my head up high still. Nothing is going to deter me...
 
Crash;
Your doing great!
A few little setbacks (I hate cooling issues) but the overal project is great!
Even if there are a few small issues come Saturday, I am SURE your Father wont mind and will understand.

Remember, old cars are like Jeeps, never quite 'Done', there is always something that needs to be fixed.

Your Dad is going to be SOOO supprised!!

Take pics of the unveiling!!
:popcorn:
 
Back
Top