• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Need a little prayer

Just an update..

I took the car to work and we got it aligned (just a toe set). My parents took me to lunch and they got tabs for it so its 100% legal. So of course I took it for a cruise around town--my dad is going to love this.

I had a problem with the starter--Bendix would not engage 1/2 the time. So I pulled that and tore it apart and polished it up and it seems to be wroking perfect now.

I had a problem with the outside(driver) door knob getting stuck in the open position. I was able to pop the upper door plug and get some grease on the sliding portion(push's against the swivel portion of the handle) of the knob and its working good and much smoother. I also did the same with the passenger.

I got a little bit of the interior cleaned.

The rear window trim came in today and my dad is going to drop that off tommorow so I can move forward.

I still have not heard from Don on the splash shield so I am getting nervous about that.

But its getting closer every day..
 
Crash;
Your doing great!
A few little setbacks (I hate cooling issues) but the overal project is great!
Even if there are a few small issues come Saturday, I am SURE your Father wont mind and will understand.

Remember, old cars are like Jeeps, never quite 'Done', there is always something that needs to be fixed.

Your Dad is going to be SOOO supprised!!

Take pics of the unveiling!!
:popcorn:

Thanks for the support and I can't agree more. Just keeping my head up high and moving forward to saturday

crash = force of (automotive) nature

:cheers:

he he he :smokin:
 
Well the rear window trim came in. It was not too difficult to get it put on. It took a while to work it into place but having good quality clips made a big different from the windshield trim.

dad500.jpg


dad501.jpg
 
If you remember the replacement pony for the drivers fender didn't fit along with the holes being too large. My dad took both down to a local mustang place in bellevue. Come to find out the one that came off the car was for a 68.

So what I ended up doing was clipping the pin on the tail. I then had to remove the spash shield to access the back side of the fender. Since the holes were too big for the small pin retainers I ended up getting creative. I took some 1/16" thick alum and drilled 3/32 holes and cut them into small squares. Put the emblem on and slid the part I made over the pin and then the retainer. Since the retainer holds on the end(when installed properly) I had to put them on backwards and up against the part I made. The emblem now sits firmly and I then gobbed undercoating around the pins. Should hold up.

dad502.jpg


So now I am just down to bumpers...
 
Crash, that car looks just amazing. I am in complete awe at your skills. It is an understatement to say that I am jealous. I am soooooo sure that your father will be very pleased and proud.

Now I get to go home tonight and look at the 69 GTO in my garage that has been in pieces for three years or more waiting to be worked on. I am a sad, sad man.
 
Crash, that car looks just amazing. I am in complete awe at your skills. It is an understatement to say that I am jealous. I am soooooo sure that your father will be very pleased and proud.

Now I get to go home tonight and look at the 69 GTO in my garage that has been in pieces for three years or more waiting to be worked on. I am a sad, sad man.

Thank you--I try and have allot of patience...

A 69'---wow......
 
Did I miss something - what was the outcome with the transmission issue?

Seeing you do this build reminded me of a Mustang owned by one of my buddies in the Navy. It was a 65 - Pony interior - 6 cylinder and the odd part was it was a factory 4 speed.

Your Dad will be proud of the car. More important, he will be proud of you and all who made it happen. I can see him explaining to people. "My son did this."

I am looking forward to meeting some day. I am in Alaska now - July, we will be transferred back to the lower 48. We have a home just outside Yakima.
 
Don came out and brought the splash shield so we threw it on. It looks MUCH better with the right color on it..

dad503.jpg


Then the rest of the goods to finish off the front of the car. The bumper has a funny twist to it so I used a bottle jack to get it close. I would say its not perfection but looks damn good. Me and Don sat there and commented how shocked my dad will be when he see's it on saturday.

dad504.jpg


Well its unsure if the rear bumper will show tommorow so we might have to do without it. But thats how it goes and I am sure my dad won't mind since I will have more to do to it this next week to wrap it up.
 
Did I miss something - what was the outcome with the transmission issue?

Seeing you do this build reminded me of a Mustang owned by one of my buddies in the Navy. It was a 65 - Pony interior - 6 cylinder and the odd part was it was a factory 4 speed.

Your Dad will be proud of the car. More important, he will be proud of you and all who made it happen. I can see him explaining to people. "My son did this."

I am looking forward to meeting some day. I am in Alaska now - July, we will be transferred back to the lower 48. We have a home just outside Yakima.

Not sure on the tranny yet. I made the choice to wait till after saturday. So on monday I am going to pull it and tear it down.

Ya I have actually talked with a couple of his co-workers and they have said he talks constantly about what I have been doing--pretty cool and makes me feel pretty good.


Well if you ever get to the wet side I would love to meet up.
 
Its Beautiful man!!:drool:

Tommarow is going to be like your Fathers :birthday: and :christmas: and :cheers: (New Years)
all rolled into one day !! I bet it will be crazy :crazy:

I'll tell you, your have done an amazing job, AND payed attention to detail on top of it all.
you deserve a toast and a round :cheers:

Have fun presenting it to your Father!

:woot:


And remember....we'll all want to see PIX!
:needpic:
 
Just got back from a short Vacation, Crash. Hope all is going FANTASTIC today- you guys are in my thoughts.
 
Just got back from a short Vacation, Crash. Hope all is going FANTASTIC today- you guys are in my thoughts.
Same here, I was thinking of you today, hope everything went as amazing as that car is and your effort has been!! :thumbsup:
 
The special rivets showed up for the door plate. These were a piece of cake to install with a punch..

dad505.jpg


dad506.jpg
 
Now---time for that day.....

Started by giving the car a GOOD wash/dry with a shammy.

dad507.jpg


Spent a good part of the morning getting the house ready. I finally came up with a plan to give the car to my dad. Sounded like there were going to be allot of folks here so I put the car under the carport and gave it a runway..

dad508.jpg


dad509.jpg


Had to show off some old parts. This was a last minute thing and wish I had thought of it a while ago and Don could have grabbed the old quarters before they went to scrap.

dad510.jpg


More to come once I grab the wifes SD card..
 
So the wife wanted a bow on it. We didn't get a chance to buy one of those BIG ones--so the wife and a couple other friends did one up.

dad511.jpg


So here was my plan. Once my parents got into town my mom was going to call. Once they called we put a tarp on the fron t of the carport so they could not see the car which worked perfectly.

dad512.jpg


Well since my sister could not make it on time we had to wait and we had to keep my dad from seeing the car (he tried but kyle held him off--ha ha).
 
So we sat him down and blind folded him..

dad513.jpg


Can ya tell he's a camera nut,lol..

dad514.jpg


So we pulled the tarp and the blind fold--. He turned instantly red and didn't quite know what to do or think--it was a perfect moment that made all these months and hard work worth it...

I am going to have video here soon--caught it all on camera.
 
It was just flat out, well it could not have been ANY better. My dad and mom just walked around the car looking inside and out. He was just a loss of words, ya it was perfect..

dad515.jpg


dad516.jpg


He sat in the drivers seat and asked if I want to go for a ride. I said nope---its your turn..

dad517.jpg


Mom hopped in....

dad518.jpg


dad519.jpg


And off they went to run around the block..

dad520.jpg
 
Back
Top