• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Need a little prayer

I never get in on these prayer threads, but an errant mouse click put me on page three of your build. Ended up reading through the whole thread last night.

Crash, that was a very cool thing you and yours put together for your dad. :thumbsup:
 
Thumps up!

Awsome just awsome! video is great just speechless! Know he will enjoy it for many years to come!
 
Some updates.

First with my dad.

The scan showed 1cm of growth in the tumor in the last 2 months since he has been off chemo. He said its still way smaller than before he started chemo so things are doing ok.

Last weds he started chemo again. This time its a different mixture due to the numbness the last round of mixture caused. After 7 rounds he will have another scan to see whats happening. He's still very positive..

As for the car. We are hoping the rear bumper shows this week.

He ordered a new radiator and horns.

I looked at the cost of fixing the trans vs. locating a used one. The cost of fixing the trans was about $100 more than finding another used unit. So we chose to just fix this one so we know what shape it will be in and not have get another pile thats worn out like the one that was in it. Those parts should be here this week too.

The 20th they are supposed to start putting up the new building that the car will sit in so it will be fully protected from the elements.

Thanks for the support
 
Keeping you guys in my prayers, Crash.
 
Crash, I haven't been on in a bit, so I had to catch up. The reveal was great. You could see the joy in your dad's face. I'm sure this is no small piece that has been keeping him going. I pray the next round of treatment does the trick. Ya'll did a great job and like JC said, thanks for sharing your family with our family. :thumbsup:

Truck
 
Keeping you guys in my prayers, Crash.

Thanks randy

Crash, I haven't been on in a bit, so I had to catch up. The reveal was great. You could see the joy in your dad's face. I'm sure this is no small piece that has been keeping him going. I pray the next round of treatment does the trick. Ya'll did a great job and like JC said, thanks for sharing your family with our family. :thumbsup:

Truck

Thanks truck---you guys really are great.....
 
Update time.......

My dad is doing really good. His #1 thing is photography and he's the main guy for our county fair. They are having a deal going on this sunday and is feeling great and looking forward to it.

I have a bunch more parts.

The new rear bumper. The lic. plate lamp now makes sense..

dad541.jpg


Its ready to go on but I hopped over to other items first.

dad542.jpg
 
My dad found new horns for it--not those universal types but direct replacements. They fit perfectly.

dad543.jpg
 
I got the new fuel sender. I didn't realize it but the float was full of fuel on the old one. I have not seen that in years.

dad544.jpg


Thats all installed

dad545.jpg
 
My dad also got a new radiator--this one is a 3 core and should do the job nicely. I did a test fit and its going to be perfect.

dad546.jpg


And yes--I will have to paint these also,lol.

dad547.jpg


So tommorow night I will try to get that all done.

I have all the trans parts except the 1st/rev gear so its getting closer.
 
Well this looks better don't ya think,lol.

dad548.jpg


Got the new rad installed. Its definitely bigger but the fitment (once I got what holes to use) was very nice..

dad549.jpg


Had to make a new drain tube out of some 1/4" tube.

dad550.jpg


Got the rebuild kit for the tranny

dad551.jpg


The 1st/reverse gear was shipped on weds so it should be here soon. In the mean time I am going to get done what I can on the tranny. I am also going to get the area above the tranny undercoated. Its getting closer.
 
So I got the new horns in and guess what--ya no worky.

dad552.jpg


So I pulled the horn button off and No voltage at the contact. hmmm. I am going crazy I think because I know I did before. So turned the steering wheel and I have voltage at one little spot. So I pulled the steering wheel and the horns work with manually crossing contacts.I looked over the old/warped steering wheel and pulled the contact plates.

dad553.jpg


dad554.jpg


Well the fix was pretty simple--I just had to shim the contact plates a tad, reinstall and works like a champ. I am sure my dad will order a new steering wheel after driving it for a while.
 
I got all of the tranny parts cleaned up and some painted. I got it assembled as far as I could till I get the last part so it should be a cake walk to get it done/painted and thrown in. I also replaced the slip yoke bushing. The old was was in wrong,lol and It was super simple.

dad555.jpg
 
Ya I finally got the rear bumper on. Ya it totaly makes the back of the car and also now has a working lic. plate light,lol..

dad556.jpg


dad557.jpg


So with the rear bumper on I put the trunk back together. Ya dad got a new tire cover. It certainly cleans up the trunk.

dad558.jpg


He also got a NICE car cover. Its one of those felt layered jobbies.

dad559.jpg


I guess the building is done where the car will be kept--I will try to get some pics..
 
So today my dad stopped by and dropped off the first/rev gear.

So I came home and dug right into the tranny. It went together smootly until I went to install the tailshaft housing. I found the countershaft pin was longer beyond the groove for the keyway so it was hitting the housing. It was simply a matter of pulling it and grinding the excess and wala....

So its all painted up now.

dad560.jpg


So I will let the paint dry tonight and tommorow throw it back in...
 
So I got the tranny in and everything bolted up.

dad561.jpg


dad562.jpg


I took it for a quick spin around the block and found it wasn't holding in 2nd gear(pretty sure the shift rod needed adjusted) and sure enough it was just a matter of a simple adjustment.

So today I got home and decided it was time to take it for a good test drive and get some gas in it. So me and my boy hopped in and went for a 1/2 hour drive. the trans sounds good and the brakes stopped pulling once everything got seated in. It really drove nice (I was impressed) and man did it turn heads.
 
So there was only one problem left to handle. Once in a while the temp/fuel/oil pressure guages would go dead. I pulled the cluster out enough to get to the back side and check the voltage at the temp guage. I found at times it would go from 4v to 0v and 1v to 0 volts. So I got out the schematics and started checking things out. Here is where I learned something new about the car. I found something on the back of the cluster that looked like a circuit breaker and I had constant B+ on one leg and the fluctuating voltage on the other.

So I did a bunch of reading and found it was actually a mechanical Voltage regulator--see something new. Well this one is bad.

So I found this write up on how to build one for under $10 that was solid state.

http://chris66dad.tripod.com/id29.html

So tommorow after breakfast with the family I will swing by radio shack and pick up the needed parts and whip it out.
 
Back
Top