• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Oriental Red Original Paint refresh with NOS

I would take a hair dryer on medium heat to those wrinkles and be done with it. It might even take careful application of high heat to get those wrinkles out.
 
Doused the rear seat with interior cleaner and heat gun on low setting.

Looks alot better, but think will just take time and next summer 100 degree sunshine basking.

Another thought is put seat in attic where it's 140 degrees.

Seat smells fantastic... like a woman fresh out of shower :)
 
I have used steam to shrink/take wrinkles out of vinyl headliners- wonder if that would help.

As far as the smell, you've got it made...mine smells like a dog fresh out of lake after Monday's rain...
 
Went to Jeep Jaunt in South Lousiana over the weekend. Met "rstickley" and his kids, they looked to be having a blast in Daddy's Scrambler!
Richard is a nice guy with a super rust free Scrambler.
photo980-1.jpg

It was a benefit ride for Lung Cancer, very well organized. Over 1000 registered Jeeps.
Cool police escort & closed intersections for a 40 mile drive down South LA's "old spanish trail" past huge oak lined roads and several nice plantation homes...to have nice lunch inside banquet room of Casino. Looked for Tommy & Bouley.
Those Cajun's really know how to party, beer for a buck & lots of Cajun Jeep Chicks with own Jeeps were at the show. Lots of nice door prizes and live auction including iced down beer.
photo2311-1.jpg

photo1692-1.jpg


Stayed at a really cool cabin in the swamp, after a some down home Cajun Boudain & few beers....fished for gators with a chicken tied to a rope. Had a couple on line, but iPhone flash not enough for pics.
photo1773-1.jpg


AND ......

Finally found some nice original patina'd OEM Torx wood side rail bolts !
photo2150-1.jpg


And bought the rest of his parts and a M416 to haul them all home. Guy had bought his Scrambler new in 1981 and had bought lots of NOS stuff from dealership for a restore.
photo1534-1.jpg
 
Where in Louisiana was this? I'm in Baton Rouge and didn't know about this. Sorry I missed it.
 
It's right there in Lafayette. Every year I say I want to go but always end up going hunting instead
 
It was great to meet another member. Wish we would have had more time to visit and talk Jeep. It was amazing at the size of this event this year. You can see some of the info if you search "Jeep Jaunt" on facebook. It would be great if we could plan for a group of Scramblers to attend.
 


Hello Red Mistress:wave:

I really love the "stance" of this Scrambler:thumbsup: Do you have any comments/complaints/opinions about the 1" suspension lift underneath it:shrug:

I am thinking about putting the same 1" lift under my stock green Scrambler, due to the fact that the factory springs are about shot. I am only running 30x9.50's on factory 15x7 wheels, no plans to go bigger. It looks like this is a nice system, and gives the Scrambler a "stock" look (mine is starting to look like a "lowrider":rotfl: with the sagging springs). Mainly just curious about the ride quality:shrug:

Take care:cheers:




EDIT - 2 year old picture of mine, sitting on factory springs, it has probably "shrunk" about 1" in height since then:

100_5009-1.jpg
 
Last edited:
I drove the 82 Oriental with the street tires at 30psi ( I didn't air down) around the main trail @ Superlift park. It was nice and smooth over the rocky road.
And drove it for few weeks around town and I really liked the ride.
The PO called them replacement springs, swapped them as rubber bushings on OEM were hard and cracked. Think the brand & part number tag is still on them, I can get if U need.

The 2" wide CJ front springs do have tendency to sag more than the 2.5" rear's.

I haven't decided on which tires to run yet, by the time I get: heavy duty cooling radiator, A/C components, 8274 and brushguard on front................ &........ rear bumper, rear seat, bedmat, tailgate mat and Wagoneer hitch will have to see overall stance.
I don't like the nose down... doodle bug look.. even if OEM.

For original stance reference here is a 9,900 mile Scrambler with some 30 or 31" BFG A/T's.
I drove it at high fence deer reserve and it needs front springs.

Old Jeeps...Like most aging Women, a little "lift" really refreshes them :)

photo1545-1.jpg

photo1543-1.jpg
 
I'm kinda fond of the paint and strips of that Scrambler.Here is mine. cars 006.JPG
 
I drove the 82 Oriental with the street tires at 30psi ( I didn't air down) around the main trail @ Superlift park. It was nice and smooth over the rocky road.
And drove it for few weeks around town and I really liked the ride.
The PO called them replacement springs, swapped them as rubber bushings on OEM were hard and cracked. Think the brand & part number tag is still on them, I can get if U need.

The 2" wide CJ front springs do have tendency to sag more than the 2.5" rear's.

I haven't decided on which tires to run yet, by the time I get: heavy duty cooling radiator, A/C components, 8274 and brushguard on front................ &........ rear bumper, rear seat, bedmat, tailgate mat and Wagoneer hitch will have to see overall stance.
I don't like the nose down... doodle bug look.. even if OEM.

For original stance reference here is a 9,900 mile Scrambler with some 30 or 31" BFG A/T's.
I drove it at high fence deer reserve and it needs front springs.

Old Jeeps...Like most aging Women, a little "lift" really refreshes them :)

photo1545-1.jpg

photo1543-1.jpg


Any help on the part #'s would be greatly appreciated:bow: Glad to hear that it rides great, there are not too many "off the shelf" type options if you are not looking for a lift of at least 2.5":( I like my "stock" green Scrambler, and don't want to lift it too much. The 30x9.50's work well with the T5, 3.31 axle gears, and factory computer controlled carb. I think for my purposes, 31's might be a bit too big, but they sure look good:twocents: I run 30 psi in my street tires, they ride nice and smooth, but I am starting to hit the bump stops on small pot holes....................


Those factory 8274 winch/brush guard combo's weigh a ton. You might have to look into some custom front springs, maybe Alcan, to get the correct spring rates/desired ride height for the front?? The added weight of the 3 core vs 2 core radiator and the AC parts will be negligible, but that winch will definitely nose dive it. I had an older Bellvue 8000 pound winch (predecessor to the 8274) mounted on my '78 CJ7 that had stiff Rancho 2.5" lift springs, and it "nose dived" it:twocents:

The rear might not be too much of a concern, the rear spring packs are usually stiffer. But, most of the "lift spring" manufactures advise putting add a leaves in the rear packs when used on a Scrambler??? If you have to go with custom front springs, might as well do the rear, too:thumbsup:


That 9,000 mile Scrambler looks great, I bet that was cool to drive around in:drool:

Anyway, any help will be greatly appreciated. I might decide to give my green Scrambler a Christmas present, it is getting jealous of all the attention jeepaddicts green Scrambler has been getting lately. And, i think my green Scrambler could use a slight "freshening up", "she" is getting older, and "gravity" is starting to affect "her":rotfl:
 
I'm kinda fond of the paint and strips of that Scrambler.Here is mine. View attachment 29342

I really do like the brown and other "earth tone" colors that came on the CJ's:thumbsup: I sometimes wish I would have repainted my rebuilt trail Scrambler with one of these colors, all the scratches/dents don't look as bad on these colors, where as on my red Scrambler, every imperfection/"love tap"/poor judgement moment stands out:twocents: My old beat up '78 CJ-7 still had the original "Mocha Brown Metallic" paint, and it looked "good" all beat up/scratched up/dented/slightly rusted etc:thumbsup:

That's a great looking Scrambler:cheers:
 
Raymond, Your "Red Scrambler" was ment to be red. It wears it's rewards well as it is. Just couldn't imagine it coming out any better as an all around Scrambler. :thumbsup: No second guessing allowed my friend. :wave:
 
Finally found some nice original patina'd OEM Torx wood side rail bolts !
photo2150-1.jpg


And bought the rest of his parts and a M416 to haul them all home. Guy had bought his Scrambler new in 1981 and had bought lots of NOS stuff from dealership for a restore.
photo1534-1.jpg

Nice find. Love to buy "Everything including the trailer" at swap meets. Seems to always turn out well. :thumbsup:
 
Nice find. Love to buy "Everything including the trailer" at swap meets. Seems to always turn out well. :

Toby, IMO you are the "father of CJ-8's" and a legend in Jeeps.
Yep, buying whole package when seller is getting out of Jeeps is best for buyer.
Turns out "TEX" is close buddies with another TX legend Jeeper friend of mine.
TEX went out of his way and found 2 new 31" BFG A/T's in a small town...on a Sunday, and got them mounted while I continued to Jeep Jaunt, so could stop back by on way home.
In the very loaded M416 is a vintage snap on tool box, I would of liked to of bought his tool collection (would of required a 26' U Haul and trailer) but.... last weekend we went 4 wheeler riding in Ozarks & tore up front diff on my Gator and broke transmission housing on my borrowed brother's T-Rex. Side by sides UTV's are more expensive to repair than Jeeps !

Raymond, yea my mistress's (as wife calls them) get jealous and start dripping when I spend too much time on a certain one :)
I'll get the mfg & part numbers off springs tonight.
I had Alcan build springs for my modified Scrambler after I weighed each end.
You are correct, the winch & 150' cable and mounting plate will affect stance.
Unless U are in a hurry....Hold off on ordering new springs, these may be available :)

HER... 9,900 mile copper Scrambler SR is very nice and honor to drive.... but not as fun as HIS..... 14,000 mile Red SR Scrambler with high compression SBC 350 & 33's.
Big difference is: His was repainted and her's is original.

As far as your choice in color, I must defend RED................. Dennis Collins told me circa 1999 that the sporty colors are always trashed and have high miles. I've had him looking for a Red Scrambler since before then and of all the uber nice CJ's that CB has sold ....never has had nice Red Scrambler.

photo1465-1.jpg


Now... I gotta get back to work so I can pay for this hobby.



.
 
Last edited:
Appreciate it Toby, and I agree Dennis, the "sportier colored" models do seem to be more "loved";) I have already "depreciated through fun" my red Scrambler a little bit, but since it is a rebuild and I built it to drive, it will be OK:thumbsup:

Thanks for the help on the part #'s, depending on your time frame for leaf spring swapping, we might be able to work something out:wave:
 
Appreciate it Toby, and I agree Dennis, the "sportier colored" models do seem to be more "loved";) I have already "depreciated through fun" my red Scrambler a little bit, but since it is a rebuild and I built it to drive, it will be OK:thumbsup:

Thanks for the help on the part #'s, depending on your time frame for leaf spring swapping, we might be able to work something out:wave:

Well the springs will be pretty much last on this build after all the Jeep SE is installed.
I seem to get more done than Tommy, but with all the other kids stuff I do... not as fast as you work.
Maybe by time you finish "Yard Scrambler" and Tommy's Red SL :)

Good that you are enjoying your "trail Scrambler" nice thing about a repaint is... can fix damage and make paint match. Can't do that on original paint machines.

photo1884-1.jpg
 
Back
Top