



with the sagging springs). Mainly just curious about the ride quality

I drove the 82 Oriental with the street tires at 30psi ( I didn't air down) around the main trail @ Superlift park. It was nice and smooth over the rocky road.
And drove it for few weeks around town and I really liked the ride.
The PO called them replacement springs, swapped them as rubber bushings on OEM were hard and cracked. Think the brand & part number tag is still on them, I can get if U need.
The 2" wide CJ front springs do have tendency to sag more than the 2.5" rear's.
I haven't decided on which tires to run yet, by the time I get: heavy duty cooling radiator, A/C components, 8274 and brushguard on front................ &........ rear bumper, rear seat, bedmat, tailgate mat and Wagoneer hitch will have to see overall stance.
I don't like the nose down... doodle bug look.. even if OEM.
For original stance reference here is a 9,900 mile Scrambler with some 30 or 31" BFG A/T's.
I drove it at high fence deer reserve and it needs front springs.
Old Jeeps...Like most aging Women, a little "lift" really refreshes them![]()
![]()
![]()
Glad to hear that it rides great, there are not too many "off the shelf" type options if you are not looking for a lift of at least 2.5"
I like my "stock" green Scrambler, and don't want to lift it too much. The 30x9.50's work well with the T5, 3.31 axle gears, and factory computer controlled carb. I think for my purposes, 31's might be a bit too big, but they sure look good
I run 30 psi in my street tires, they ride nice and smooth, but I am starting to hit the bump stops on small pot holes....................


I'm kinda fond of the paint and strips of that Scrambler.Here is mine. View attachment 29342
My old beat up '78 CJ-7 still had the original "Mocha Brown Metallic" paint, and it looked "good" all beat up/scratched up/dented/slightly rusted etc
Finally found some nice original patina'd OEM Torx wood side rail bolts !
![]()
And bought the rest of his parts and a M416 to haul them all home. Guy had bought his Scrambler new in 1981 and had bought lots of NOS stuff from dealership for a restore.
![]()
Nice find. Love to buy "Everything including the trailer" at swap meets. Seems to always turn out well. :
Raymond, yea my mistress's (as wife calls them) get jealous and start dripping when I spend too much time on a certain one
I'll get the mfg & part numbers off springs tonight.
I had Alcan build springs for my modified Scrambler after I weighed each end.
You are correct, the winch & 150' cable and mounting plate will affect stance.
Unless U are in a hurry....Hold off on ordering new springs, these may be available
HER... 9,900 mile copper Scrambler SR is very nice and honor to drive.... but not as fun as HIS..... 14,000 mile Red SR Scrambler with high compression SBC 350 & 33's.
Big difference is: His was repainted and her's is original.
As far as your choice in color, I must defend RED................. Dennis Collins told me circa 1999 that the sporty colors are always trashed and have high miles. I've had him looking for a Red Scrambler since before then and of all the uber nice CJ's that CB has sold ....never has had nice Red Scrambler.
![]()
Now... I gotta get back to work so I can pay for this hobby.
.
I have already "depreciated through fun" my red Scrambler a little bit, but since it is a rebuild and I built it to drive, it will be OK
Appreciate it Toby, and I agree Dennis, the "sportier colored" models do seem to be more "loved"I have already "depreciated through fun" my red Scrambler a little bit, but since it is a rebuild and I built it to drive, it will be OK
Thanks for the help on the part #'s, depending on your time frame for leaf spring swapping, we might be able to work something out![]()
