• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

3D printed Scrambler

bigwalton

Alaskan Postal nutjob
FORUM MANAGER
SOA Member
City
Dexter
State
MI
If you've never seen anything being printed in 3D, you're missing out. This is the next big thing in design/prototyping.

I was doing a google search and up popped this:

tumblr_m7zk87boVx1qgoa30o1_500-1.jpg


:bacon: :smokin: :headbang:

Linky:
http://shapeways.tumblr.com/post/28348364469/3d-printing-models-at-1-25-the-jeep-cj8
 
Those tires are way too big for that lift. Front bumper is not original, and the fender flares are aftermarket.

$5000, tops.
 
A local shop here has a 3D printer- that thing is cool to watch it work. They currently have to program the designs in, they're working towards a 3D scanner.
 
tumblr_m7zk87boVx1qgoa30o1_500-1.jpg


Man, a rust-free Scrambler and he had to go an Linex the whole thing. That kills me. Nice hardwood floor in that garage though.

I had a client years ago who had a 3D printer. I watched it make a coffee carafe (one of their products)... it was like magic. Just amazing to watch.
 
Hey Eric,

Remember that conference your company in NC was working on. That is a lot of the technology that we were doing while I was there.

That is a cool model, but wait till you see one made from sintered Ti. That machine is Cool. Sprays a fine Powdered Titanium and then uses a set of lasers at the spray point to melt and harden into a solid shell. Lots of applications for thin items, Think aircraft blades with cooling vents cast in, or rocket cones.

The conversion of a solid to a computer model is coming along with many new advances. Just got to be in the know. i like the Jeep however.



Carl
 
can this material be chromed...if so it would be a good way to make replica jeep body badges...i looked into the desktop model printer. It was only $499 but the powder it uses is $65 a pound. That could get pricey quick!!!
 
You do not want to think about how expensive these Ti machines are. You only really use them when doing something so thin that making it out of a billet is just too expensive.

We did do a lot of stuff with Lost wax foundry stuff.

That is where we would make a part out of Plastic SLA machine parts or more lately there is a machine that puts out a 2 part wax mold. Then you put the part in a Ceramic slip. Heat the slip in a ceramics Kiln and the plastic or wax will melt out. Then you can pour Brass, or in our case Iconel into the mold let it set up and then use the part. We also did a lot of Ceramic models for wind tunnel use where the model would see extremely high heat.

But i bet you could have many of these made in a simple plastic. Cast them into ceramic and use a chemical to melt them out then pour your metal of choice into them and have them Chrome plated from there.


Carl
 
This is why I hang around here... hoping some of the smart will eventually rub off on me.
 
Back
Top