• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Pictures please

WOJO 1

Basic User
City
Sparks
State
NV
Who can post pictures of their rig with a RE 4.5 lift? I am debatting this or the Rocky Road SOA. Pics please..
 
Mine's got that lift, but on Waggy axles and with a 1" body lift too. I'd go that way ALL DAY over that "bolt on" SOA. I'd go any way over it actually.

Read up on that SOA kit REAL well before you go that route.

Did you search on here for "Rubicon Express" or "4.5" in thread titles? I think there's a couple of threads with similar requests for pictures of the RE lift.
 
I saw a lot of posts/threads but pictures are few and far between. One thing I know now though is that it looks like the RE kit will allow for 35" tires with maybe a body kit as well. Not a lot of difference in cost between the 2 though.
 
Here are some pictures of my red '83 that I rebuilt. It has the RE 4.5" lift, PLUS a 1" body lift.

35x12.50x15 on factory 15x8 wheels.

0194-1.jpg


0204-1.jpg




And how it sits currently, with 33x12.50x15 on factory15x8 wheels.


00140-1.jpg


00244-1.jpg


00339-1.jpg


00728-1.jpg


00826-1.jpg


00924-1.jpg



A few notes/opinions/personal observations:

1) I am running factory wide track axles
2) 35's will fit, but the springs do settle
3) 35's hit the back of the rear wheel wells when it flexes off road
4) If you keep it on the street/light wheeling, 35's will fit
5) If you take it off road like I do (Pritchett Canyon, for example) 33's are a much better choice, or start cutting sheet metal

And some newer pictures, after the springs have settled after 10,000 miles of driving in one year:


0651-1.jpg


0741-1.jpg



I drive/use this Scrambler a pretty good bit. It sees mud, rocks, sand, daily driving, and cross country trips. For me, the 33's work/fit better, but that is my opinion.
 
Last edited:
Here you go man. Its an 83 with a RE 4.5" HD kit and a 1" body lift.
Clears the 35s great and leaves room for flex.
After using alot of different brands over the years the RE kit is the best performing and riding SUA kit on the market IMHO.


229967_4602253583617_931852251_n-1.jpg


399628_4602231223058_1599445339_n-1.jpg


With age the front springs will sag a lil over time with the weight of a good bumper and winch is about my only complaint.

Later
Sean
 
Now were talkin'. Thanks for the pics guys. I ordered my kit through my source. Should be here on Wednesday. Thanks again. Oh and this jeep will hopefully see the Rubicon and any other place I can take it.
 
Check my build thread. 4.5 plus 5/8" body lift. MetalCloak fenders. 35" KM2's on 15X8.5 Centerlines.

Spankrjs comments are spot on. Mine has settled almost an inch in the front, but I'm way heavier than stock.
 
This is a RE with no body lift. 35 inch tires. the front settled some with a diesel motor and a winch up front. jeep019.jpg
 
Last edited:
Interesting...everyone else's pictures look like they sit at least an inch higher than mine...
 
I had the RRO SOA kit. Can't recommend them or their kit. Not the best SOA solution anyways. The RE springs are the better way to go of those two. SOA takes a lot to make work well.
 
4.5" RE, 1" body lift, 35s
forum


Just back from a mud bog competition ;-)
IMG_2315.jpg


This is the problem area with 35s. Notice in the above pics, I've got rock rails under the bed - not just between the front and rear axles. This makes the pic below a little hard to decipher. That's the passenger rear wheel with the front of the Jeep to the right. The tire is hitting the leading edge of the rock rail. Without the rock rail, the sheet metal's next. I'm going to have to add some huge bump stops or get out the sawzall. Leaning toward the sawzall and TJ flares.
IMG_2681-1_zps50244f1c.jpg
 
Last edited:
Manhattan, that poc cannot be after a mud bogging competition. The rig is waaaaaay too clean. ;). Beautiful.
 
Manhattan, that pic cannot be after a mud bogging competition. The rig is waaaaaay too clean. ;). Beautiful.

Guilty. It's actually a little embarassing - that it's that clean. It's only got a few hundred miles on it, and I'm still sorting some things out before taking it off road. The rubbing is one of the big ones. When it was parked on the street in that shot, a guy stopped to look at it. He was very complimentary... until he asked "Do you show it?". That hurt ;-)
 
Here are some pictures of my red '83 that I rebuilt. It has the RE 4.5" lift, PLUS a 1" body lift.

0741-1.jpg



I drive/use this Scrambler a pretty good bit. It sees mud, rocks, sand, daily driving, and cross country trips. For me, the 33's work/fit better, but that is my opinion.

I for one cannot get enough pictures of this beautiful Jeep. :bow:
 
Mine too.....I can rub 33's.

My 33's rub the back of the rear fender wells, too. I dropped the bump stops a little, so they only "rub" now, not "crunch":thumbsup:


I for one cannot get enough pictures of this beautiful Jeep. :bow:


Appreciate it:cheers::thumbsup::wave: Damn "Yard Scrambler" has been taking up all of my free time lately, this one is starting to get jealous :rotfl::wave:
 
Got the lift and tires on. RE 4.5 and 35 MTR's
forum
[/IMG]

Getting some steering wander. Need to try and fix that.
Picture002_zpsfe7a25f2.jpg
[/IMG]
 
Last edited:
Nice!

Yours sits at least 2" taller than mine.:angry:
 
" He was very complimentary... until he asked "Do you show it?". That hurt ;-)"

OH ho ho ho Hang your head in shame!! :rolleyes:
 
Back
Top