• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Bumper End Caps

AJ2393

Scrambled in the Head
Silver Member
Lifetime Member
City
North Dighton
State
MA
Posting here and hopefully without violating any forum rules.

I have a nice pair of factory ends caps for my factory chrome rear step bumper. Due to limited availability to finding these, before putting them on, I am in the process of having some reproductions made as backups. Speaking with the gentlemen helping me on this, we are likely going to use plastic mold injection to make these. Trying to get a close to factory as possible, but I cannot guarantee to be an exact match. I am posting to see if anyone else out there is interested in or needs a set of reproductions. I am hoping others would benefit from having these as well. Just to be clear, I am not running a business here and I am not mass producing these for resale (I do not want to violate forum rules). I am simply going to have mine made and felt others may want to piggy back on the only batch I will have made. To be up front, I am not clear on costs or time frame right now as we are still working out a few details, just simply gauging others interests if everything is a go. I will provide more details and hopefully a picture of the first casting at some point. I welcome any comments or thoughts.

If this violates forum rules, administrators please delete. I like this place to much and don't want to be given the boot!
 
Yep, put me down. These things break if you look at them the wrong way:thumbsup:
 
Glad you will be making them. Working on a deal for some bumpers, and if it comes through, I'll need some. Thought I was going to have to make patterns and have some cast in aluminum.
 
I'm interested in two sets, and if it works out, and if you don't want to open a business....I will.
 
Thanks to everyone who has replied so far with interest. This gives me a better idea of how flexible I can with fabricators/producers if I need to make a minimum production quota.

In the interest of being fully transparent with this process, here are some things everyone should know:

1. I was contacted yesterday after my initial post by another forum member (not sure if he wants to be named) who has spent time working on developing these as well. We talked last night and have agreed to put our heads together on this project. We had talked about altering the design a little only in the attempts to reinforce the bolting areas where these normally crack. Again, to be clear, we are still in the development phase so I have no definitive timeline or costs yet. It could take months or more to get these things going and there is no guarantee of success. There are a lot of factors involved with developing molds and methods to reproduce these. My initial email was just gauging interest so I have better information when/if the time comes to make a run of these.

2. I anticipate if we can reproduce these that there will be some slight differences from the factory ones. I will try to get them as close to factory as possible from the outside looking in.

3. The final cost will be based on material costs, machine time costs, production costs and costs for the machinist (development & production). To be clear, I am not taking any money or profit from these. I am not not going to mark these up unless there are any other costs that I have not anticipated. Again I have no estimate of cost right now, but once I do I will post and let you decide if you want to proceed or not. Hopefully by then I'll have bunch of pictures that can help you better decide.

Again, I don't want to get anyone upset so I am trying to be as clear as humanly possible about what I am doing and the potential for success. Hopefully, with luck, the production team and I will be successful in making these at a reasonable cost.

Please post or PM with any questions.

-Alex
 
I would ask and expect anyone who will be selling these to contact me prior to making them available so we can work out something in everyone's best interest.
 
I would ask and expect anyone who will be selling these to contact me prior to making them available so we can work out something in everyone's best interest.

BW,

Are you referring to me with this post? I am trying to do everything by forum rules, and if I am violating any please let me know. I do not have any intention of making a business out of these, rather just fulfilling a need of my fellow Jeepers. Again I have no way of guaranteeing success with these, but I had to know there was some interest moving forward to justify even looking into injection molding due to the upfront cost I will have to foot. Otherwise, there are other methods that cost less that could be used to make say one or two sets. If successful, I plan to post production price cost (material, labor, etc) for everyone who has responded to choose if it what the are willing to pay for a set. I may go through all this work and not have enough people to cover the production costs, that is a real possibility. If this occurs, I will not produce any. I hope this provides clarification on things and let me know if there are any other steps I should take to be withing forum rules.

I am posting to the thread so that all can benefit from this discussion.

-Alex
 
Back
Top