Awesome work on the bed floor. I replaced mine this past summer and wow what a project. Such a sense of accomplishment to see nice new metal in there. I think the fixing the inner fender wells where they meet the bed were the most painful thing I've done on the entire jeep
I took a different approach to the tailgate support to bed connection point. I'm wondering if I should have done what you did.
That is EXACTLY the picture I was looking for, but could not find it.
The "rounded" corners are what threw me off on the classic enterprise design vs. the stock one.
You have it more "Factory" style with it tucked in, but the way they cut the end of the new bed piece, it was never going to tuck in there for 2 reasons.
First, the ends wouldn't slip under and down.
Second, (as I showed), the tailgate cutouts were in the wrong location.
So, all in all, I went with my solution, not elegant, but then again, with all the panels being replaced, I don't think this will ever be 100% perfect.
My biggest concern with doing it the way you did was how was I going to get it into position to really weld it in there good as I would want it nice and strong.
Even though there is a brace/bar in front of that location like 4 inches, and I probably will never haul too many heavy things in that EXACT location, I wanted to make sure I could make it attach good.
Sheet metal screws would have worked, as they are in other areas I am doing (along with the cleckos), but once I made the call, I went down that path and here I am.
I applaud your work, although jealous you didn't have any issues with the roll bar feet and wheel tubs, mine were a mess.
cb