• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

TJScrambler - Getting Started

Cb will you slow down please!, you will have finished this one too before i have finished mine....

You have done right though, rebuild what you have if you can, if CE would of sent me the parts for mine i would of done the same (possibly over a period of 5 years though not a week....)
You need panels? Just let me know. I can send them!!

cb
Sent from the garage
 
Last edited:
Sorry Dave. Some more progress. Taking off the front driver side floor roll bar mount. It is nasty

777922db94b4ca201868122d497ba094-1.jpg


cb
Sent from the garage
 
So got the panel cut out but so rusty. So a little reverse engineering

7bf7098c6c5228e98d69aa672206326e-1.jpg


b1163f2907b1039d5b673857e066ada8-1.jpg




cb
Sent from the garage
 
All set and squared for a test fit

a645b67edeff92338bc786052315984e-1.jpg


We are close. No attachment on the outer panel. Need more grinding and clearancing

Tired and hands are sore


cb
Sent from the garage
 
Awesome work on the bed floor. I replaced mine this past summer and wow what a project. Such a sense of accomplishment to see nice new metal in there. I think the fixing the inner fender wells where they meet the bed were the most painful thing I've done on the entire jeep

I took a different approach to the tailgate support to bed connection point. I'm wondering if I should have done what you did.

L_gDXLbH46jqes4Y9NzeUHGumlwMo6A3WSJfv0TZ-2.jpg
 
Awesome work on the bed floor. I replaced mine this past summer and wow what a project. Such a sense of accomplishment to see nice new metal in there. I think the fixing the inner fender wells where they meet the bed were the most painful thing I've done on the entire jeep

I took a different approach to the tailgate support to bed connection point. I'm wondering if I should have done what you did.

L_gDXLbH46jqes4Y9NzeUHGumlwMo6A3WSJfv0TZ-1.jpg

That is EXACTLY the picture I was looking for, but could not find it.
The "rounded" corners are what threw me off on the classic enterprise design vs. the stock one.
You have it more "Factory" style with it tucked in, but the way they cut the end of the new bed piece, it was never going to tuck in there for 2 reasons.
First, the ends wouldn't slip under and down.
Second, (as I showed), the tailgate cutouts were in the wrong location.

So, all in all, I went with my solution, not elegant, but then again, with all the panels being replaced, I don't think this will ever be 100% perfect.

My biggest concern with doing it the way you did was how was I going to get it into position to really weld it in there good as I would want it nice and strong.
Even though there is a brace/bar in front of that location like 4 inches, and I probably will never haul too many heavy things in that EXACT location, I wanted to make sure I could make it attach good.
Sheet metal screws would have worked, as they are in other areas I am doing (along with the cleckos), but once I made the call, I went down that path and here I am.

I applaud your work, although jealous you didn't have any issues with the roll bar feet and wheel tubs, mine were a mess.

cb
 
Catching up on the pictures

Trial fitting

16d2d2ce4f1624b6ab4b63e65cd85461-1.jpg


8cf437cf38e904abf31a3784a7bb1035-1.jpg


0e8d999303ffd3eb96743d5aeb7b132a-1.jpg


The inner tub was trimmed but man what a pita

7a661cae3d77cb3881d927d5d95b6eea-1.jpg



cb
Sent from the garage
 
That is EXACTLY the picture I was looking for, but could not find it.
The "rounded" corners are what threw me off on the classic enterprise design vs. the stock one.
You have it more "Factory" style with it tucked in, but the way they cut the end of the new bed piece, it was never going to tuck in there for 2 reasons.
First, the ends wouldn't slip under and down.
Second, (as I showed), the tailgate cutouts were in the wrong location.

So, all in all, I went with my solution, not elegant, but then again, with all the panels being replaced, I don't think this will ever be 100% perfect.

My biggest concern with doing it the way you did was how was I going to get it into position to really weld it in there good as I would want it nice and strong.
Even though there is a brace/bar in front of that location like 4 inches, and I probably will never haul too many heavy things in that EXACT location, I wanted to make sure I could make it attach good.
Sheet metal screws would have worked, as they are in other areas I am doing (along with the cleckos), but once I made the call, I went down that path and here I am.

I applaud your work, although jealous you didn't have any issues with the roll bar feet and wheel tubs, mine were a mess.

cb

It took some hacking on the end of the floorboard to get it to tuck in there.

And don't be jealous of me - my outer bed floors have some spots for sure. I'm the one who is jealous of all of that shiny clean metal in your bed. :headbang:

I'm also jealous of the pace you're working at. Awesome work

-Barry
 
It took some hacking on the end of the floorboard to get it to tuck in there.

And don't be jealous of me - my outer bed floors have some spots for sure. I'm the one who is jealous of all of that shiny clean metal in your bed. :headbang:

I'm also jealous of the pace you're working at. Awesome work

-Barry

The pace is going to slow down soon, just trying to get as much in as I can before kids school break, etc. when I will be watching them and not working on it.
I hope over the weekend to have the floor mostly mocked in place, or at least all the spot welds take care of.
I really hacked up the wheel well arch and need to do some fixing... I think it was replaced at some point as there was a very large number of spot welds on it and compared to the rest of the floor, it seemed out of place.
I plan on gluing and welding these in place so they never come apart... many years down the line if someone wants to redo it, they are going to be in for a big shock.

cb
 
Was wondering if anybody has a diagram of the placement of the frame-to-body mount locations for an'83 scrambler?
 
Was wondering if anybody has a diagram of the placement of the frame-to-body mount locations for an'83 scrambler?

I know Dain did this recently in his De-rustification thread, but I am not sure if he used the old mounts as a reference or had a diagram, can't remember.
Did you cut all your mounts off?

cb
 
Back
Top